sketch

Something better than Sketch Wrapping?
Are there other Featurescripts out there that do all the warping/wrapping of sketches in @konstantin_shiriazdanov Sketch Wrapper? There are several FS in the document, including Rect to Polar, which I've used a bunch to take text and a logo and make it flow along an arc. The downside is that the feature is really slow, and…
THE BLUE THING WONT DISAPPEAR
I'VE BEEN TRYING TO FIGURE IT OUT FOR 3 HOURS I NEED TO SUBMIT IT TODAY IF ANYONE CAN HELP ME IN 2 HOURS THAT WOULD BE AMAZING Thank you so so much https://cad.onshape.com/documents/a9de6ba783c7636478acbf00/w/4a3ec4107807364b0ab41a3c/e/419d779206557349a8fade7b?renderMode=0&uiState=63c7d39b7e874c1d70cc2d6b
Use sketch geometry that I can't "reach"
Hi, I'm making a hinge that attaches a top and a bottom. I'd like to project the hinge geometry I've created on the bottom to the top. But both he sketch feature and the area on the top is "inside" the two parts. I've tried to use section view with no luck. Is this a product of a poor design strategy? Or is there a way I…
how to center sketch on center point
Seems like such an easy thing but I have been searching for about 20 minutes to find this. I have a sketch where one corner is on the center point. I want the center point in the center of the drawing. I can't even figure out how to move the sketch on the plane.
Lining up sketches on different planes
If I draw a rectangle on the front plane, and extrude it by 100mm.. Then rotate my view and start sketching on the right plane.. It's like the sketch tools don't acknowledged that there's now an object, edge, or line there. I need it to 'snap to' so I can place some lines and holes in the right spots, relative to the…
Is it possible to have driven variables?
Is it possible to have a variable that is only driven by a dimension, for example in the polygon sketch entity it doesnt appear to be possible to make the number of sides driven by a variable, is there a way to make a variable be driven by the number of sides instead? This isn't a use case I'm considering, more of a way to…
My drawing 'Sheet Reference Properties' won't update for Mass or Materials properties
When using my own or Onshape templates I can't get the Mass or Material properties to update. Is this a wider issue, or perhaps something I'm not doing quite right?

Something better than Sketch Wrapping?
Are there other Featurescripts out there that do all the warping/wrapping of sketches in @konstantin_shiriazdanov Sketch Wrapper? There are several FS in the document, including Rect to Polar, which I've used a bunch to take text and a logo and make it flow along an arc. The downside is that the feature is really slow, and…
THE BLUE THING WONT DISAPPEAR
I'VE BEEN TRYING TO FIGURE IT OUT FOR 3 HOURS I NEED TO SUBMIT IT TODAY IF ANYONE CAN HELP ME IN 2 HOURS THAT WOULD BE AMAZING Thank you so so much https://cad.onshape.com/documents/a9de6ba783c7636478acbf00/w/4a3ec4107807364b0ab41a3c/e/419d779206557349a8fade7b?renderMode=0&uiState=63c7d39b7e874c1d70cc2d6b
Use sketch geometry that I can't "reach"
Hi, I'm making a hinge that attaches a top and a bottom. I'd like to project the hinge geometry I've created on the bottom to the top. But both he sketch feature and the area on the top is "inside" the two parts. I've tried to use section view with no luck. Is this a product of a poor design strategy? Or is there a way I…
how to center sketch on center point
Seems like such an easy thing but I have been searching for about 20 minutes to find this. I have a sketch where one corner is on the center point. I want the center point in the center of the drawing. I can't even figure out how to move the sketch on the plane.
Lining up sketches on different planes
If I draw a rectangle on the front plane, and extrude it by 100mm.. Then rotate my view and start sketching on the right plane.. It's like the sketch tools don't acknowledged that there's now an object, edge, or line there. I need it to 'snap to' so I can place some lines and holes in the right spots, relative to the…
Is it possible to have driven variables?
Is it possible to have a variable that is only driven by a dimension, for example in the polygon sketch entity it doesnt appear to be possible to make the number of sides driven by a variable, is there a way to make a variable be driven by the number of sides instead? This isn't a use case I'm considering, more of a way to…
My drawing 'Sheet Reference Properties' won't update for Mass or Materials properties
When using my own or Onshape templates I can't get the Mass or Material properties to update. Is this a wider issue, or perhaps something I'm not doing quite right?

sketch

Discussion List