sketch

Aloha All, I am trying to write a FS that generates a sketch that is accessible from within Assemblies. What I am seeing is that a feature is generated with the sketch I have devised but this "sketch" isn't available to insert into an Assembly. Is there a way to create a sketch in FS that shows up as an actual sketch…

Can someone please tell me how I can define this sketch? Nothing moves when I try moving different sections. Also are there any tips for defining sketches, I feel like I run into this issue quite a bit.

Hi, My 1st technical question. Please see below image. How to link with other dimensions when inputting new dimension? Is there a Variable list somewhere, should I refer to it? Thanks first,

I am trying to create a circular pattern of (embossed) text on a surface, with each instance displaying a different value in increasing order. A simple example would be a clock with hours values increasing around the dial. My final project will have much more than 12 values but the dial will serve here as an illustration…

Hello, weird interaction I'm fighting: Connecting a line to spine using a tangent constraint removes the face of the sketch. Unsure if it's a bug or something I'm unintentionally doing is causing it to happen. Any suggestions?

Link to Hershey Text I have seen a few improvement requests related to adding single line fonts for CNC engraving. After some research I found these 31 single line or "Hershey Fonts" available online here, and an explanation on how to decode them. I converted the data into a CSV for FeatureScript to interpret and tried to…

I made a cutout of an airfoil and want to move it forward about 7mm from where it started to make space for a leading edge slat that I am attempting to create. I am currently copy and pasting the sketch, re-aligning it to it's original position, then moving it forwards, but the cut-out section of the airfoil keeps on…

BackstorySome months back I ran into some challenges with the standard OnShape tooling when it came to modelling a belt and set of pulleys. I took to the forum for help, where I was pointed to a series of custom FeatureScript solutions. Namely: This parts studio with a custom belt (though the pitch is wrong). I liked the…

I started adding a small ridge or notch in items that I need to fit together snugly but where I don't trust the tolerance of my printer. I found it tedious to manually sketch 2-4 small ridges to extrude up the side of every box, so I have created a feature studio that does this automatically, adding a sketch to the centre…

I have a part studio that has a body that is a composite of multiple bodies (all defined from the start in Onshape in this feature tree). After the Boolean, I select a face that spans across what used to be multiple bodies and start a sketch. I click the "use" command to convert the edge bounds of that face to a sketch,…

I was wondering if it is possible to take a function such as y=u/x^2 into an a sketch line. the reason being is i would like to create a 3d hill sphere. with revolves i would only need one side of it so y=u/x^2 (0,inf)

Hi everybody! I have an issue that I run into every once in a while that I'd like feedback on from the great community here. Sometimes, I find myself wanting to reuse sketches. This could be the shape of a specific punchout for a connector that I might need to use several times in the same part, and/or reuse in other…

Every so often I end up with a sketch that is not fully defined with no blue showing. The normal problem is that the undefined point is under a defined point. The only way that I have found to find the undefined point is to remove constraints to move the existing lines until I can find the actual problem. Is there a way to…