Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Best Of
Re: Thoughts on the logo
https://forum.onshape.com/discussion/15092/new-onshape-logo
Please vote up.
Really, I am bit disgusted with the new logo.
It just does not fit the interface and the open feel of Onshape, exactly like the threadstarter describes.
The sharp corners, the standard font letters. Just like any other CAD software: Onshape is not that!
Practically, the GREEN thing draws my attention. I feel I have to look in the top left corner. Ow wait, it's only the logo...
The tiny light grey letters on the light grey background, so impractical.
The amount of white-space (or grey space) around the logo in the corner, it does not look good.
And pleaaase, do not tell me this is only the first step and everything wil be green instead of blue... :'(
Please vote up.
Really, I am bit disgusted with the new logo.
It just does not fit the interface and the open feel of Onshape, exactly like the threadstarter describes.
The sharp corners, the standard font letters. Just like any other CAD software: Onshape is not that!
Practically, the GREEN thing draws my attention. I feel I have to look in the top left corner. Ow wait, it's only the logo...
The tiny light grey letters on the light grey background, so impractical.
The amount of white-space (or grey space) around the logo in the corner, it does not look good.
And pleaaase, do not tell me this is only the first step and everything wil be green instead of blue... :'(
Re: Animation fun
Finally,
I have an animation project that is actually for work.
I am trying something new, at beginning of the gif you will see a little clock.
That is what is being animated, 1 revolution. Everything else is timed through relations and the wave paths.
This way I am hoping to be able to use this sub assembly as a "caned cycle" seeing's how this is one of a dozen sub assemblies all working in unison but at different intervals.
My hope is to be able to only need a simple 1 revolution on the top level assembly every time I want to 'cycle' this operation.
Which should simplify the whole process.
I have an animation project that is actually for work.
I am trying something new, at beginning of the gif you will see a little clock.
That is what is being animated, 1 revolution. Everything else is timed through relations and the wave paths.
This way I am hoping to be able to use this sub assembly as a "caned cycle" seeing's how this is one of a dozen sub assemblies all working in unison but at different intervals.
My hope is to be able to only need a simple 1 revolution on the top level assembly every time I want to 'cycle' this operation.
Which should simplify the whole process.
Re: Standard content component requests
If we could get access to McMaster Carr's library of STEP/SLDPRT files that would be fantastic
Certified Onshape Associate- Coming Soon!
We are excited to share that Onshape will soon be launching the Certified Onshape Associate exam. Students who successfully complete this exam will receive certification as an Onshape Certified Associate. This will be a valuable credential for them to demonstrate their skills and knowledge to their peers and potential employers.
To help get your students ready to pass the Onshape Certified Associate exam, SolidProfessor will be releasing an online Certified Onshape Associate Prep Course.
Prepare your students to earn their certification with expert-guided lessons, hands-on exercises, a practice exam, and free exam vouchers.
Sign up today to be the first to know when the exam and prep course launch!
Re: Improvements to Onshape - December 10th, 2020
I wonder if PTC realizes many people use OnShape because the hate Creo? This logo looks like it is from the 2000's. I hope this is not the first of many top down changes.
Re: Improvements to Onshape - December 10th, 2020
Huge fan of variables on the fly! but not very sure about the new logo. It's nice but lacks something.
Guizmo
6
Re: Improvements to Onshape - December 10th, 2020
Have to say that this update is a miss for me.
The logo is far from an improvement.
The whole brand was a consistent graphic approach to UI, fonts and colors. The color palette was tied throughout all the complimentary shade of blue, light blue, orange and grey. The font choices were similarly cohesive through all menus. This was everywhere in the platform. Tropicana definitely came to mind as well.
Unfortunately I think this disruption and distraction from everything we should be focused on.
The logo is far from an improvement.
The whole brand was a consistent graphic approach to UI, fonts and colors. The color palette was tied throughout all the complimentary shade of blue, light blue, orange and grey. The font choices were similarly cohesive through all menus. This was everywhere in the platform. Tropicana definitely came to mind as well.
Unfortunately I think this disruption and distraction from everything we should be focused on.
Theo_R
6
Re: Improvements to Onshape - December 10th, 2020
On the fly variables are huge! I know I'll find myself using them more now just because. However I'm definitely tired of the use of an isometric cube / hexagon for 3D companies...there must be 1,000 companies with something similar and the previous type was unique.
Re: Extruding in for loop
Part of the poor error reporting is a known bug; the reason the second extrude is failing is that the ids are hiearchical and the "loop" portion of the id must come before the "individual operation" portion of the id. So use
id + count + "extrude"
instead of
id + "extrude" + count
To query the points of a sketch, depends on what exactly you're looking for -- For example, qBodyType(qCreatedBy(sketchId, EntityType.VERTEX), BodyType.SHEET) will give you region corners, while qBodyType(qCreatedBy(sketchId, EntityType.VERTEX), BodyType.WIRE) will give you (possibly duplicated) sketch entity endpoints.
id + count + "extrude"
instead of
id + "extrude" + count
To query the points of a sketch, depends on what exactly you're looking for -- For example, qBodyType(qCreatedBy(sketchId, EntityType.VERTEX), BodyType.SHEET) will give you region corners, while qBodyType(qCreatedBy(sketchId, EntityType.VERTEX), BodyType.WIRE) will give you (possibly duplicated) sketch entity endpoints.
Intersect Views (New Custom Feature!)
Intersect Views
(New Custom Feature!)
https://cad.onshape.com/documents/1755463e12cab51e4a5de51f/w/07865f22b67cc44e473c99a3/e/302fb7288b77057ca30414fb
How to add a custom feature to your tool bar:
