I want to make a static mixer inside a cone

phillipp_pals

Good Morning,

I'm new to cad in general and have been playing around for a week. Now I'm busy with my application for the Design Academy and I need some help.

I want to 3d print something that looks like the inside of this tube (static mixer) but in a conic shape. 
The furthest I came was a spiral.

Thanks in advance.

NeilCooke

OK how about now? (open link above)

NeilCooke

Is this what you're after?

https://cad.onshape.com/documents/e94235809ef0b69d4481bb44/w/27c841085bb2517b09959502/e/d11ec7b02d0fac5099ab1986

phillipp_pals

Almost!

more I need it to be cut though
like this

NeilCooke

OK how about now? (open link above)

phillipp_pals

excactly like that!
Thank you

phillipp_pals

okay so I didn't want to ask again because I should be able to figure it out myself, but how do I change the dimensions of this thing? I can only get it wider.

It needs to be about 280 mm high and 80 mm wide at the base and 15 mm at the top. I'm sorry 

phillipp_pals

phillipp_pals said:

okay so I didn't want to ask again because I should be able to figure it out myself, but how do I change the dimensions of this thing? I can only get it wider.

It needs to be about 280 mm high and 80 mm wide at the base and 15 mm at the top. I'm sorry 

oh and has to be slit in half so I'm able to print it

NeilCooke said:

OK how about now? (open link above)

NeilCooke

If you edit each feature in turn you will see there will be a dimension controlling each size. To split it into two create a plane and use the split command. If you really get stuck let me know.

phillipp_pals

NeilCooke said:

If you edit each feature in turn you will see there will be a dimension controlling each size. To split it into two create a plane and use the split command. If you really get stuck let me know.

I think I needed some rest, I got it the way I want it.