How do i design something like this?

Answers

• GregBrown Member, Onshape Employees, csevp, pcbaevp Posts: 362

  November 11 Answer ✓

  looks like you need to Chamfer the three edges, then Move face, then Fillet?
  

  

  Or you could go crazy with some nice bridging curves and other surfacing techniques… ;)

  

  5
• gabor_lenart Member Posts: 5 ✭

  November 11 edited November 11

  First I want to thank you for the reply on the post. I really like the second one. How do I achieve something like that? Do you mind share something like a tutorial or do you have any link where I can check?

  0
• gabor_lenart Member Posts: 5 ✭

  November 11

  Can you show me how you did that in the second image? I would appreciate it!

  0
• martin_kopplow Member Posts: 1,038 PRO

  November 12 edited November 12

  All three curves in the model are actually but intersections of the three cube sides with the same sphere.

  

  https://cad.onshape.com/documents/26761bb9a612b23ab2d2ad96/w/082b8b168cfa9c4e97dee996/e/caefd62bcecd8664de159257?renderMode=0&uiState=6914a13274adbddaf28cfdc2

  Once you know that, you could make it much easier, though. ;0)

  Just sketch 3 identical radius tangent arcs, one on each side, then split the sides with them. Delete unwanted faces, use the fill tool.

  1