Why do sketches not paste in to the same cords when copied?

Answers

• bradley_sauln Moderator, Onshape Employees, Developers Posts: 373

  January 2018 edited January 2018 Answer ✓

  If you paste a sketch entity that you've copied while editing a sketch, it will place wherever your mouse cursor is and give you transformation tools to move it around. However, if you are not editing a sketch you can copy and paste in place easily with a right-click command. Please see the animation below and let me know if you have any questions:
  
  

  Engineer | Adventurer | Tinkerer
  Twitter: @bradleysauln

  
  

  7
• Tony_C_ Member Posts: 273 PRO

  January 2018

  My sketching isn't working like that.  I did the same steps and when I paste onto the new plane the new sketch is shifted. 

  0
• Tony_C_ Member Posts: 273 PRO

  January 2018

  I think your example is working because you're picking the circle whose center is already the origin. Try coping and pasting all three shapes and see what happens. 

  0
• Tony_C_ Member Posts: 273 PRO

  January 2018

  I think when you just paste a sketch (from copied entities while not editing a sketch) onto a plane, OS is finding the center of that sketch and placing that center on the origin.

  0
• bradley_sauln Moderator, Onshape Employees, Developers Posts: 373

  January 2018

  Ahh, I think you are right. Let me dig into this further. Can you also fill out a feedback ticket on your end?

  Engineer | Adventurer | Tinkerer
  Twitter: @bradleysauln

  
  

  0
• Tony_C_ Member Posts: 273 PRO

  January 2018

  @bradley_sauln
  
  I submitted a feed back ticket. 
  
  There's also some info in the comments as to how I pasted each sketch.
  
  https://cad.onshape.com/documents/09c7422dd39727502ecb2251/w/46f9efadf6299bff5526d7da/e/7478b3c19607119a63f860b3
  

  2
• bradley_sauln Moderator, Onshape Employees, Developers Posts: 373

  January 2018 Answer ✓

  @Tony_C_ Some additional notes from my digging:
  
  

  When you paste into a sketch that isn't active, the pasted entities get roughly centered on the origin. This is difficult to do that since the 2D reference to the origin doesn't carry through.
  
  

  When you paste into an active sketch, they go roughly where your mouse is.

  Engineer | Adventurer | Tinkerer
  Twitter: @bradleysauln

  
  

  5
• michael_watson Member Posts: 15 ✭✭

  January 2018

  bradley_sauln said:

  @Tony_C_ Some additional notes from my digging:
  
  

  When you paste into a sketch that isn't active, the pasted entities get roughly centered on the origin. This is difficult to do that since the 2D reference to the origin doesn't carry through.
  
  

  When you paste into an active sketch, they go roughly where your mouse is.

  Can this behavior be changed? I have been annoyed by this "feature" as well to the point of wondering what's the point of pasting sketches. Seems like the default should place the sketch exactly to the same relation to the origin on the new sketch plane as from the the sketch plane it was copied.

  1
• jayden_lawson Member Posts: 3 EDU

  February 2022

  Agreed with Michael. Part of the reason for copying/pasting things is to align them. And since there's no simple and obvious way to align things, if you paste in the same place as the original, at least you can then use the transform tool to move the pasted thing along one axis, so it stays aligned in the other axes. As a new user, it strikes me as very odd that this simple method has not been used.  Same with no simple alignment tools.

  1
• andre_grondin Member Posts: 2 ✭

  November 19

  Hello !

  I have the same issue with copy pasting the SKETCH it is not working an easy way , the animation is nice but way too fast so we can follow , there must be a betterway to be able to do a carbon copy of a sketch to another one on a similar plane without having to re-adjust ,

  thank you for all the help on this site it is very appreciated

  regards

  0
• eric_pesty Member Posts: 1,875 PRO

  November 20 edited November 20

  https://forum.onshape.com/discussion/comment/109789#Comment_109789

  If you want true carbon copy, you specifically don't want to copy paste!
  You can use something like the transform pattern FS https://cad.onshape.com/documents/25a0a6dfaa76e64574a5e0db/v/8217d6d96ccc324b8dd86160/e/4c62c06c4e0e4db3703a2d4c
  Or you could create a offset surface of the sketch (a flat face can be used pretty much anywhere you would use sketches) and use the "regular" transform tool (using transform by mate connector)

  0