-
How Would You Create A Variable Chamfer In This Scenario?
Hey Guys, Im new to 3D modeling and want to create a variable chamfer on this peice. I'd like the top point to have a wider chamfer, and taper to a more narrow chamfer on the bottom point. I wouldnt even know where to begin on this. Ive included an image of a similar profile using the fillet tool, but I want it to be a…
-
Custom Feature: Chamfillet
Link to Feature A common problem with 3d printed models (FDM) is that a fillet on the build plate ends up looking ugly because the printer cannot print a horizontal overhang. Usually, if you are designing a 3d printed part, you then use a chamfer on the bottom face because most FDM printers can print at least a 45 degree…
-
Angles of the chamfer function
Hello. I would like to draw a Z shape table. Here are the calculated angles and sizes. But when I set the sizes and angles in OnShape I've got a really different format. I use part chamfer angle and size settings. Here is my drawing link:…
-
Different width of the Chamfer after Boolean operations
Hello! Have a problem with continues chamfer on the edges after Boolean operation. On the screen you can see the different width, can't solve it for days, the only way I found is to create first chamfer shape (3rd screen) with Loft and after vertical edges will Chamfer ok, but it is a very tedious way. I tried to connect…
-
How does one chamfer an edge only over part of the edge's length?
Hi, I use onshape to design woodworking projects. We woodworkers often create a chamfer that does not apply to the entire length of an edge. We very often prefer a smooth transition from a perfectly square edge to a chamfer. This treatment is very common on table legs for example. For illustration please follow this URL:…
-
Alternative to chamfering internal edges
I am messing around in feature script and have tried to chamfer the edges of extruded text, highlighted here. It fails on any piece of text that has a vertex with edges at less than 90 degrees. Is there another method I could use to achieve this?
-
How to have a bend on two surfaces?
Hello I am currently working on two rectangular shapes where one is angled to the other by 15 degrees. I just need now to have some sort of bend on each corner to have a smooth connection. I tried to fillet/loft them but it just won't connect as smooth as possible. I am quite new to CAD sorry if this is obvious.…
-
Both original edge and chamfered edge shown at the same time ?
Novice: I have a conical shape made with a "Revolve -> Surface" and then "Thicken" the surface. Now I want to chamfer (or fillet) the edges coming from the "Thicken". Now the Chamfer works, but the original surface still remains. Is that a bug, or did I make the conical shape in the wrong way ? Zoom in on "Chamfer 1" and…
-
Can't chamfer an edge
So this may be stupidity (or OnShape noobness) on my part, but I can't chamfer an edge in the image below; all the other edges took a chamfer or fillet as needed. There is no error that I can see, and sometimes it shows a preview briefly of a chamfer or fillet (I tried both) but it goes away shortly after appearing. I…
-
Chamfer callout missing?
Hello, I've been trying to locate the chamfer callout dimensioning tool. Typically, one sees something like .03 x 45° with a leader. While I could create a note, I was hoping for an associative method, so if I changed the model, the drawing would also update. Thank-you, - Gerry