-
Keep edges when extruding split line as surface
Does anyone know how I can keep the edge when extruding a sketch with a split line as a surface? Here is an example of what I am talking about:
-
How to do it?
Hi, I'm quite newbe to Onshape, I'd like to create a moel to this object: But I haven't an idea to create this recessed hole. My model looks like this right now: Help me please!
-
Create and edit an object using a DXF file
Hello everyone, I wanted to create a part using a DXF file, center it in an object, and then remove it. Now it always displays an error and only the part that has not been centered can be removed. What am I doing wrong and are there any better solutions?…
-
I started this project. I am stuck trying to extrude a drawing.
I started this project, started shaping, etc. All good. The difficulty arises as i import a dragon outline and trace it using 3 point curves. i did some digging and cut overlaps, etc. it seems closed. It will not extrude for the life of me. Some help would be appreciated.…
-
Extrude along a angled surface
Hi, I want to extrude a sketch along an angled surface. How can I do it?
-
How do I create this spout
I've been playing around with this for a while and made some progress but nothing that will work properly so far. I have a revolvled sketch which creates the bottle shape and onto that I am trying to add a pouring spout. I have sketched out the top shape and the side profile. I was trying to wrap the shape onto the surface…
-
Make extrude removal stop before walls get too thin while maintaining a consistent cross section
Hello all, I am trying to make a leeboard hydrofoil model on this document: https://cad.onshape.com/documents/40a09d2b7dbc0e96f864de60/w/9b820e6caf97b342e0b34d33/e/e4addd4030400b4f4e982b63?renderMode=0&uiState=687bf140abce191eed0df80b This will be 3D printed with carbon fibre spars inside it, and I have been struggling to…
-
Extrude curved surface and snapping to model in sketch mode
Hello, i am new to this program but i pretty know lot functions from C4D and few years ago Sketchup, so i gues i should not be so stupid but its 2 days and i still cant find good solution. 1) Extrude curved surface I need to make two small support by extruding two lines on both side. So i was trying to make sketch which…
-
How do I extrude this with both sides sharing the same middle line?
-
How to tilt/shear a circular pattern so that it describes a cone
Hi, I'm fairly new to onshape and parametric CAD, but blown away by its power and versatility. I'm modelling for 3D printing and I've hit a knowledge gap that I haven't been able to resolve via the forums. I'd be grateful for any advice. I have a pattern of cylinders that I created by sketching a circle, repeating with…
-
How to Identify Faces Directly Created from Sketch Edges in an Extruded Part (FeatureScript)?
Hi everyone, I’m working with FeatureScript in Onshape and I have a question regarding extrusion operations. I’ve created a part by extruding a sketch, and now I need to identify which faces of the resulting solid are directly created from the edges of the sketch (i.e., the side faces that are the result of extruding the…
-
Problem with extruding shape
If I try to extrude my sketch, it doesn't work, and OnShape is not telling me why. Please help! Thanks in advance!
-
Slanted plane sketching problem
Hi! I'm basically a complete Onshape beginner, so please bare and be patient with me. I am trying to create a tape dispenser (pic) in onshape, right now working on the body. I've managed to make the bottom part of the body, on which it can already be seen that the front and back have different widths, and the bottom and…
-
How to proceed with complicated cylindrical shape in part
I am re-creating a part that I want to modify to enlarge the electronics bay. I can't figure out the best way to proceed with the subject cylindrical shape in the photo, Indeed, I think my approach is not quite the same as the original part, as some of my extrusion lines don't match. Any ideas very much appreciated! Maybe…
-
extrude upto next causes extrusion error
I'm attempting an extrusion that I'd like to terminate "at next" where the termination cross regions of extrusion, loft, and shell. I'm extruding in both directions, and the first "up to next" works (to a similarly complex region), but the 2nd one fails. In my project, it is the "intake_ribs" extrusion, and I left the 2nd…
-
How to extrude the entire outline
I am trying to do something simple, I am sure there is some shortcut key I am missing. Here is the most simple case of what I want to achieve. I have a sketch of a rectangle and within it a series of concentric circle. I want to extrude the entire rectangle without taking into account all the internal drawing. Currently to…
-
Extrude separate adjacent shapes
Does anyone know of a way to extrude two or more adjacent sketch outlines as separate objects? I often need to do this and wind up making several separate extrude features, but it would be much quicker and simpler if there was a featurescript or something that would do it in one operation.
-
How to put holes in this cap
Hello dear CAD-Experts, I am fairly new to CAD, but want to design a cap for a salt shaker. But i dont quite know to make holes in the top since when I use the delete option it always brings up an error. Thank u for any advice!