-
How to fix fillet between cylinder and loft
Hello, beginner here. I am trying to fillet a corner between a cylinder and a loft, the fillet is working, but it isn't extending to the inside of the cylinder, and outside of the loft. Is there an easy fix for this?
-
Issue Filleting Wing(Loft) to Fuselage(Loft).
Hello, I'm having trouble adding a fillet between the Wings and Fuselage in this Project. I can't choose a radius even remotely close to what im after. I would like to add maybe 10 to 15 mm but whenever I try to fillet with more than 1 mm it fails. Creating a 0.5 mm fillet works. A 1mm Fillet prompts the error: "Fillet…
-
Custom Feature: Chamfillet
Link to Feature A common problem with 3d printed models (FDM) is that a fillet on the build plate ends up looking ugly because the printer cannot print a horizontal overhang. Usually, if you are designing a 3d printed part, you then use a chamfer on the bottom face because most FDM printers can print at least a 45 degree…
-
Tapered Recess Creation?
I've been struggling with one aspect of a molded boss feature I'm developing. I've tried a lot of different ways to solve this but getting a general case method that is robust is surprisingly challenging. I'm working on a molded boss feature to rival hole.fs in complexity which takes basic choices for screw type/size and…
-
How to create Tangent Complex Curves
I'm trying to create a single shape - but one with complex curves: A 'rounded heart' shape. I believe the construction should be relatively straightforward, as the object is symmetrical front/back and left/right I believe the intended way to create such an object is: * Sketch the silhouette of 1/4th of the object from…
-
Fillelt works on one part of the model, but doesnt in its exact copy but mirrored.
Hi, im making an fpv frame but i cant forf some reason fillet this. I filleted the other side with the same settings just fine. Even tried to turn off other fillets. Please help.
-
Doing a reverse fillet on a curved edge
I just started learning CAD and I am currently working on a part that needs a reverse fillet. I already looked for answers on the forum and reddit, but all the ones I found worked by just removing a certain shape (e.g. a circle) from the edge, wich only works with straight parts. In my case I need that reverse fillet…
-
Custom Feature: Loft Fillet
Because of @EvanReese's series on equations, variables, etc. in Onshape, I ended up getting sucked into the FeatureScript rabbit hole. Needless to say, I'm hooked. I'm not a real programmer, but I'm still pretty happy with coming up with something that'll automate a pain point in my CAD workflows. Plus, then I get to share…
-
Issue with fillet tool
This is for model: https://cad.onshape.com/documents/7de7fc78e73235706da8de5f/w/d1648eaa1634f3f1fd60dda6/e/1eb77fc915c8d26f3b6e3f04 I'm trying to model this shape from a STL: I constructed a solid from an extruded sketch (right sketch) and extruded cut (left sketch): I'm not trying to fillet the corners. The topmost fillet…
-
face of extrusion won't take fillet
The top surface of this won't take any fillet of any size. I can't seem to figure out why. Even very small fillets of .01 inches won't work, there shouldn't be any overlapping, even at that size.…
-
How to change which side partial fillet offset offsets from?
Hi, I want to make a partial fillet but when I select offset it chooses the wrong side to offset from and adding a second bound makes it unable to regenerate. Other edges with the same dimensions worked fine since it selected the other side to start the offset from. Is there a way to to manually select which side the…
-
How can I fillet all the raised edges of this disk radially? (Explained in description)
I would like to fillet all the raised edges of this disc so that the length of the fillet along every point on the edge is proportional to the radius of the disc at that point on the edge. I can try to explain it better if this explanation is unclear. This disc is for a cam of sorts, and there will be a number of shafts…
-
Issue with controlling direction of asymmetric fillet
Hi all, Having some issues with the asymmetric fillet feature in part studio. Only one of the edges is reversed in its direction, and I can't seem to find a way to edit or control this. Does anyone have any suggestions? Are the rounded corners causing this issue? (Corners done in a previous fillet feature, not in a sketch)…