-
Part of my airfoil cutout keeps scaling as I try transform it a few millimetres forward???
I made a cutout of an airfoil and want to move it forward about 7mm from where it started to make space for a leading edge slat that I am attempting to create. I am currently copy and pasting the sketch, re-aligning it to it's original position, then moving it forwards, but the cut-out section of the airfoil keeps on…
-
Onshape Glassworks API
Hello, My name is Gage I am looking for help with a project I am working on. I am trying to essantially search my assembly for all sheet metal parts, check those sheet metal parts size and then export those sheet metal parts as DXFs. The problem I am running into is that I can do that in a part studio but once I try to do…
-
Could someone please help diagnose how a guiding line to my loft is not connected to a profile? 😭😭
I have been trying to create guidelines for the shape of my winglet and when lofting the 1st part of the winglet I get the issue that one of the guidelines is not connected to one of the profiles. I have been getting it quite a few times but in these cases the disconnect was pretty noticeable so I could tell how to join…
-
CAM Studio Tools and Tool Changes
Hello Onshape Forum, I have been using Onshape for almost 2 years now, and I was so excited when I found out that Onshape was adding a CAM Studio feature. However, throughout my usage of this new tool, I have run into a few issues. First of all, I have access to a wide range of bit types at my disposal. However, some types…
-
Need Help With a Project....
Hi all, First I've enjoyed learning OnShape as a complete newb, but I've been beating my head against the wall with what is probably a simple task. I started on a whim for a retro 8-Track tape rack that is supposed to look like a wrapped Christmas package. I've been beating my head against a wall trying to repeat an…
-
Auto-populating Part Numbers and/or Names
As best I can tell, part names are automatically generated by Onshape when parts are initially created with the nomenclature Part [Number in design hierarchy]. Part numbers can be created automatically as well such that you can also use a numbering scheme that has a continuous counter that goes up for any part that is…
-
How to quickly seperate parts by edges or projection?
Before After I'm don't know how I can describe the question properly. But here is a demo project file, I tried 3 different way to achive the result, None of them are simple enough. Method 1: https://cad.onshape.com/documents/c7c8efb1042f752ba49d0a08/w/c627768566ebe12fa5ec4657/e/42e3261f2580997d0f91c2a5 Method 2:…
-
Wrong name on certificate
After I completed a course on learn.onshape.com, the certificate displayed a name that I put wrong on my account. Is there a way I can change the name on the certificate? I have already changed it on my account but the certificate still displays the previous name.
-
Issue Filleting Wing(Loft) to Fuselage(Loft).
Hello, I'm having trouble adding a fillet between the Wings and Fuselage in this Project. I can't choose a radius even remotely close to what im after. I would like to add maybe 10 to 15 mm but whenever I try to fillet with more than 1 mm it fails. Creating a 0.5 mm fillet works. A 1mm Fillet prompts the error: "Fillet…
-
How do I blend the two inside faces too each other? I can't seem to get face blend to work. Plz Help
https://cad.onshape.com/documents/c5684b823c04af1ec354a756/w/4360f2a9b3dae329827ae9f2/e/e1df25300d4c I want to blend a face between the outer perimeter of the center piece to the inner perimeter of the outer piece and can't seem to setup a face blend. Am I doing it wrong? is there a better function to use? any help would…
-
Surfaces Won't Turn Solid
Hi, I am relatively inexperienced with working with surfaces in Onshape, and have ran into problems when trying to make them solid parts. I am designing a logo that uses hundreds of surface lofts to enclose the top and bottom plates, but the enclose tool doesn't work for me and I run into issues in many of the surfaces…
-
Best practice when updating and versioning a FeatureScript
Community, I searched the forum, but did not find any messages that address my question. I have successfully created a FeatureScript, versioned, and shared it with my FIRST Robotics teams. Now I want to make enhancements. Are these the best steps for a new FeatureScript version? Create a new Feature Studio in the original…
-
Replace instances of a linear pattern with new part or configuration
Hello! I am trying to make a configurable grid. I have a single cell designed up and have configurations controlling the length and width. The grid can be 1x1 up to 6x6. I am trying to change the configurations of the corner instances to a configuration of the base cell with a rounded corner. I am also trying to add a…
-
Making a bend for an extruded object
I made this model and would like to bend it for 45 and 90 degrees left or right. Is there a way to bend an extruded part similar to what the loft functions do? Thank you in advance!
-
Best way to pattern Honeycomb part
Hello, I'm looking for the best way to make a Honeycomb wall. unfortunately my part has some "complex" geometry so I can't seem to get the fill pattern tool to work. I started by created a single cell and then orignally did multiple linear patterns to form the wall. I have tried this 2 difference ways one taking 8.91…
-
Improve surface of complex shape
I try to create the head of a fantasy panda. The result is not as smooth as I wanted it to be. So I'm asking you if you recognize mistakes or space for improvement. For that I'd like you to quickly guide you through my process: I started with this sketch. The head consists of two splines. I made sure the had the same angle…
-
Sketches won't loft
I am trying to get the two faces in my document to loft be each time I try the inner profile just goes red. No idea how to fix this, would really appreciate some help. https://cad.onshape.com/documents/a029e4e0f14f06e8c8efb638/w/5c0b632cb8f6c2a9d3d007c4/e/e7762b37295653af6d83ecfc
-
Onshape is unnecessarily lagy, What can I do to fix this.
Despite following all recommended troubleshooting steps provided for improving performance, the issue with Onshape remains unresolved. All suggested fixes have been implemented, I have also check my system throgh onshape at it is fine. Diagnostic tests indicate that the hardware and meet all required specifications, with…
-
drawing is printing a lot smaller than object measures in onshape
I apologize, I'm new at this, so I am still learning. I didn't want to ask for help since I need to know this, but I've tried for the past 3 days and I'm getting no where. I get everything created in Onshape, export it to an STL file, and open it in Bambu Studio. When I go to print it, it is less than half the indicated…