-
Is it possible to keep the original orientation of a patterned feature during a Circular Pattern?
I have a linear slot feature that I want to pattern around a hole and maintain the orientation of patterned feature. Here is what OS allows me to do.... But what this is what I desire... I do not see an option within Circular Pattern feature control panel to effect it.
-
Linear and Circular Pattern Project
This is a project I have my students do to learn how to use the Linear and Circular Pattern tools. https://docs.google.com/document/d/1meEt6bfkUYSRGDDeED5KUWY0BEYcze3Vyovsdjbhg2E/edit?usp=sharing
-
difficulties with circular pattern of an opSphere
I have difficulties doing a circular pattern of operations, especially with the opSphere operation. Don't know what's wrong and Onshape says regeneration complete. Any suggestions? document link: https://cad.onshape.com/documents/8e26d19f48d94a039d8e8399/w/d0ca70e6dd864413dcb64308/e/b830d5993f0ebf5a2041c6e8 Thanks!
-
holes to points in circular pattern
i want to do holes. i created points in a circular pattern as the center for the holes. no i have difficulties defining the locations and the scope in fs for the holes. const anzahl = dimensions.Rotation; for (var i = 0; i < anzahl; i += 1) { const t= rotationAround(rotationAxis, (2*PI* radian) * (i/anzahl) ); const…
-
The Circular pattern dialog is very small
When I attempt to make a circular pattern in sketch, the dialog is very small and only shows the green checkmark, so it is impossible to change the number of items and the angle. How can this happen, and more importantly how can the problem be solved?
-
Need help Circular Pattern generating copy that is invalid for Boolean. Am I doing something wrong?
I will try to paste the link to the part studio where I think the problem lies. Strangely, it was working, now a piece seems to randomly disappear after re-opening my document. I am making cutouts in the wall of a threaded cylinder with 6 circular copies of tilted rectangular blocks. The last block in the group of 6 seems…
-
circular pattern of a feature creates extra parts if instance count exceeds 29
I'm sure I'm just misunderstanding something very basic, but...In creating a model of the dials on my lathe, I wish to represent a dial ring with a graduated scale on it. So I've built a ring-shaped part which has on it a feature which is just a small slot (engraved tick-mark) for one graduation. I thought then that I…
-
Two hole patterns in same part
I have a part (essentially a flange) with two concentric rings of countersunk holes. The hole patterns are countersunk from opposite sides of the part. Making the part model was easy but when I create a drawing, the hole labeling function only works for one ring of holes. I can label one ring of holes or the other but not…
-
Constraints: How do I figure out what's missing?
I'm very much a n00b to CAD and to Onshape, but I'm learning... slowly. I've got this shape that I'm working on... http://bit.ly/2dl7NU8. It's under constrained, but I can't figure out what constraint(s) are missing to get it to being fully constrained. Anyone? In the larger scheme, is there a process that you use to…
-
Vertically Symmetric Circular Sketch Pattern
I need to create 5 square holes on a circular arc. They catch is the middle one has to be on the vertical axis. What is the best way to create such a construct so that I can adjust arc angle and radius later?
-
Rounding Calculated Variables to Pattern number of Instances
Can anyone offer any tips for how to round off or convert calculated variables to integers so that the calculated variable works for patterns?(number of instances patterned?) Surely this should be fairly simple in FeatureScript but not sure how to approach it.
-
Creating acircular pattern in featureScript
Would someone be kind enough to look at the script in this document https://cad.onshape.com/documents/623b04759dbfa9159178fe48/w/3f75f7adc024168001e48971/e/ebff95d2dd43547b3b99a055 and point me in the right direction to fix the circularPattern. I am trying to make a flange for joining sections of pipe
-
United Lofted Parts?
Hi all! First time asking something here. Here's my part link for reference: https://cad.onshape.com/documents/a3d584c5c8704fd59e6d1baa/w/8f543b70179b4f319bb33b46/e/debd8ae843674bf3a80aef15 This is just some jar I'm making for fun using the loft command, and possibly 3D Printing later. I lofted a single rib and then…
-
Boolean - Union or Intersect; Keep Tools??
I just noticed this. I was creating a Boolean of a "hub" and a circular pattern of a "fan blade". Once I did a Union, I no longer have the original Parts. There is no option for "Keep Tools". Same with Intersect. Lets say I had a fan with 4 blades and one with 8 blades. I could modify the Circular Pattern to 4 patterns,…
-
Circular Pattern of a Feature & Merge???
Hello! I created a 'Revolve-Solid-Add' (a "rib" for a domed feature) and then I wanted to create a "Circular Pattern" (8 instances) of that "rib". But, the "Add" solid merged with 'Part 1' and I could not pick it or 'Revolve 2' from the Features list to revolve & copy the rib!!! Sooo, I went back to the 'Revolve 2' and…