-
Does anyone out there know if CREO Illustrate can work with Onshape models / drawings?
Hi Everyone, I'm looking for a method of creating SVG files with Hotspots from Onshape. These will be used for a online technical manual. (I wish i could attach a file, but the uploader will not let me upload an .SVG file. See attached PPT file and the embedded video inside it.) This is something that Solidworks Composer…
-
Introduction to Sketching will not load
I am trying to have my students access the "Introduction to Sketching" lesson but it gets stuck loading for me. It opens for me but they cannot access it. When looking into the details it says that Proficiency in parametric 3D CAD is a prerequisite but I cannot find that course. Any help is much appreciated.
-
Why cant I post a response to a reply to a question?
-
Drawing not being printed
Drawing shows correctly in drawing box. But when I try to print I get a blank page. It all started when I tried to create my own template.
-
Why can't I access the onshape Fundamental Learning Pathway completion survey?
I have done all the prerequisites and optional courses as seen below. But I can't access the completion survey because it says I haven't met all the prerequisites for the content.
-
Learning path certificate not working
Hi, I have been taking the Onshape Fundamentals learning path and I have had all the diferent coursers within it, but when i try to start the couerse for the last certificate it leads me to an error message. Anyone knows what I have to do to get the certificate?
-
Why Onshape not awarding certificate after completion of both courses and survey.
I've completed all the necessary courses related to this certificate and completed the survey. However, Onshape still hasn't given me the certificate even after a major amount of time. I've made sure to complete everything to the necessary 100% and done every assessment in each course so I am still confused.
-
Part studios missing in subassemblies when trying to insert in full assembly
link to shooter document link to top level assembly document So I'm trying to insert a subassembly into a top level assembly, but whenever I do the subassembly is just missing the part studios and only has the other imported parts but not the main part studio it's built off of. This is despite the fact that I have the…
-
Free 1 month trial for OnShape Professional while in school?
I'm still in college and using the OnShape student Version to exercise and build a portfolio. Can I do the 1-month free trial for the OnShape Professional version while using the student version without providing a credit card? We use Solidworks in our major, but I have an iMac at home. I planned to purchase a PC once I…
-
how can i import my qblade?
-
Bevel gear size
Hey, I use the Feature Script Gear Lap (https://cad.onshape.com/documents/f349bdd78c53f3325055aefc/w/161d6a507877f1872b55c2b4/e/53214cbff7d86d5817cf8efb) to create Bevel gear. However, I do not know how to determine the diameter of the bevel gear. I hope you can help me, Thank
-
App language setting
Is there still no option to set the language on android? And no, changing the language of the OS is not a solution, it's a patronising crutch.
-
Can't select parts in the graphics window in Render Studio
Hey folks, For some reason I can no longer select parts or faces in the graphics window in Render Studio. As such, the only way to apply appearances is in the part tree which is excruciating as I have about 200 parts. Is this a software bug or is there an option I'm missing. For that matter - how do you drag an appearance…
-
Wie kann ich eine Formschräge in nach Innen ausrichten?
Hallo zusammen, wie kann ich wie hier auf dem Foto zu sehen eine Schräge für eine Handyablage nach Innen ausrichten, ich habe schon einiges ausprobiert leider bewegt sich hier der Pfeil nicht. Wäre über jede Hilfe Dankbar. Ich verwende deutsch als Schreibsprache.
-
android assembly insert
I've made a part and I want to use the assembly to insert 2 of them and then mate them. How do u do this in android?
-
Is is possible to transfer or share Team ownership?
-
Errors when using Parametric Curve Feature Script
Hello, I have been attempting to make use of the Parametric curve feature script by Mahir Abrahim & Ilya Baran. I am modeling a parametric Cycloidal disc, and am receiving the following error in the Feature Script Notices. R = 36 N=21 Rr = 4 E = Rr/2 P = -atan((sin((1-#N)*#t(deg)))/((#R/(#E*#N))-(cos((1-#N)*#t(deg))))) X =…
-
Is it possible to form a helix on a non straight cylinder?
Hi all, I am trying to make a hose with a 3d fit spline, so it curves in all 3 dimensions. Now I am trying to add a helix to the outside to create a sweep path for an external profile. The helix tool does not allow this, is there a way to make it work and how? UPDATE, I found 3d spiral feature script, works a treat.
-
Can anybody help me with making a cycloidal drive animate as it should?
Hello, i am looking for help (please excuse english mistakes) I have spent many hours trying to resolve this issue but i just cant seem to find the thing im doing wrong. I tried disassembling and assembling multiple times, re-mating everything in multiple ways but there is 1 cycloidal disk that just doesnt want to spin as…
-
How to export stl files with face (patch) names for snappyHexMesh OpenFoam?
Hello, Could anyone please let me know if there is a way to name surfaces and export those face names in the stl files? OpenFoam requires patch names and it would be much more easier if I could name those patches in Onshape. Thank you.
-
FeatureScript: Get extruded loop/face
Hello, I'm working on a script that exports all the features in a model and saves them as a sequence of Sketch (defined by edges and constraints) and Extrude operations for down-stream processing in another application. The data structure should be similar to this ER diagram. I use /api/partstudios/d/did/w/wid/e/features…
-
Unable to remove from Gear Lab FS Bevel Gear w/ angle over 68 degrees
Trying to add a bore to a part created with Gear Lab FS it generates the gear but on any gear with a bevel angle greater than 68 degrees trying various methods (extrude remove, boolean remove, or even intersect) do not seem to produce valid geometry (example) I have managed to get it to produce valid geometry using a Split…
-
Having trouble with wrap
Hello everyone. I am new to onshape and have looked through some tutorials. Every once in a while when I am sketching I pause, wrap, and make sure everything works. This time it said, " wrap did not regenerate properly failed to thicken all selection" I am not sure if I have some weird geometry so I would appreciate some…
-
Why were my onshape certificates deleted?
Hello! For the past few days, I have completed 3 courses. However, today, it doesn't show the courses as started or even completed! When I go through my emails to see the certificate, it says that it is not found. What can I do to get these certificates back?
-
How to create a counter sink hole for a wood plug
I cannot figure out how to set the depth of the 3/8" hole Here is the end goal at the assembly level Here is what I can find online to create with Onshape Thanks in advance, Paul
-
Autolayout Issues
I'm using Autolayout for a board but for some reason it keeps combining the top layer and the bottom board.
-
[Deleted]
.
-
A dimension cannot be created between these points
Onshape for iPad 1. Started sketch 2. Created rectangle on front plane, froze plane so it doesn’t jump around 3. Selected front plane 4. Selected Dimension tool 5. Tapped screen to show cursor 6. Dragged cursor to highlight corner point, lifted finger and point stayed highlighted 7. Tapped screen to show cursor 8. Dragged…
-
Can I export sheet metal flat pattern without countersink contours?
When I export flat patterns of sheet metal, I just want the contours that will be laser cut. I don't want contours of countersunk holes. Is there a way to set the export rule to exclude the extra contours?
-
Import coordinates, create floorplan / building perimeter, edit and export coordinates?
Hey all - I've searched the forums a bit and pretty sure the answer to my question is "yes". But want to double check. Can I use onshape to do the following: 1. Import an array of coordinates. e.g. [ [-42.5497, 50.1568], [-30.3802, 62.173], [-21.918376131139716, 49.20360783346553], [-25.240068622497233, 45.90563320787479],…