-
Practice Exam Answer Key?
Hi, would you all be able to provide an answer key for the current Onshape Associate Certification Practice Exam? My email is sdrawbaugh99@gmail.com
-
Where is the paperclip, coffee cup, and wheel rim?
I teach a basic intro course in Tech, and my students really enjoyed doing these modules. Does anyone know where I can find them?
-
QUITAR UNA CLASE // QUIT A CLASS
Buenos días, Me gustaría quitar lo que tengo rodeado de rojo en la imagen. ¿Cómo puedo hacerlo? Gracias. Good morning, I'd like to remove the red circle in the image. How can I do this? Thank you.
-
Get Drawing ElementID from PartID
I am trying to get the elementID of a drawing from a partID. What ive been trying is to first fetch all drawing elements in the document, and then to try to resolve all of that elements references using /appelements/d/{did}/{wvm}/{wvmid}/e/{eid}/resolvereferences The issue is that it resolved the reference but says the…
-
Render Studio Access
Hello, I was wondering how I can enable/access Render Studio. I am on Enterprise but am not sure how to enable this. Any pointers would be great. cheers!
-
fully defined
how can i get this fully defined
-
wie kann ich zum zeichnen von hier aus ^kommen?
-
When importing a 3D scan OBJ, all I see is a bunch of outlines. How can I get it to display properly
Hello! I am trying to import a OBJ file (3D Scan) of an engine bay to use as a reference for modeling parts and such. When I import the file however, the model is rendered as a bunch of outlines, which makes it unusable. Occasionally, when I hover over specific parts of the model, more outlines appear. I attempted…
-
Master Model course slide correction(s)
In the Master Model course, section 03. Maximizing Master Model Techniques, slide 47 needs to be updated within Exercise: In-Context Space Allocation. Specifically, you cannot suppress an item within a BOM in flattened mode any longer. https://cad.onshape.com/help/Content/bill_of_material.htm#exclude_local The slide should…
-
Assistance with multiplane sweep
Hi I have been working on this document for awhile, and i am kind of stuck on making a sweep between the balltray part to the right and the cone to the left, i want to have a rail in with the same face going from the cone to the balltray, it should have an angle and i want it keep the face of the rail in his original…
-
How to show Custom document property in drawing
Hi to all, I'm teacher at a university. We form groups of 4-5 students so that they create a proyect in onshape. For administrative reasons i thought it is a good idea, create a custom property in the document category with contains the numer of each group. This number I want to call automaticaly in the drawing template I…
-
Forbidden 403 error
Hi, I was working on an assembly and while importing a new part noticed that the insert part option didn't show anything. Kinda weird so I went to the "home" page to check if there are any issues with my models when I got a forbidden 403 error. I currently can't even log in to onshape as it just gives me a forbidden 403…
-
Some parts only rendering partially
I am working with a large workspace (https://cad.onshape.com/documents/a53a3c7d8ec68845d9aa02bb/w/424518897267b8aee7e3f891/e/1c894e04797a65c5aa5b9b02) and I have an issue of some parts only partially rendering. Screenshots have been attached.
-
PEM In-Last with Close/Normal/Loose Fastener Fit
I use the Fastener Fit option for threaded holes all the time. This works well to put the tapped hole in last. However, the same facility doesn't seem to work for PEM insert holes. There is only one option (clearance) and it cuts the insert assembly hole in all pieces, instead of the clearance fit for the fastener and the…
-
Making a part follow a 2D sketch
I am not sure if this will make much sense. I want to make my cable trays follow a 2D sketch, but I am not sure if that is possible, please let me know.
-
APP Store functionality
So I have worked out how to subscribe to APP store participants and worked through to identify a part that I would like to incorporate in my drawing. I get to the "Import" into OnShape dialogue but get a window titled after the participant and the model requested. How can I get the model to be inserted into my OnShape…
-
Não abre desenho já realizado
Pessoal boa noite Poderiam me ajudar por favor? Não estou conseguindo abrir meus desenhos já realizados anteriormente, e que já imprimi os mesmos antes. Entro em um desenho já finalizado, na aba de "Parte 1 Desenho 1", e está em branco, e não consigo fazer a impressão?
-
Automating Wiring Definitions
Hi, I'm working with somebody on automating wiring definitions, building on the https://www.onshape.com/en/resource-center/tech-tips/tech-tip-how-to-use-custom-features-for-wiring-in-onshape feature using a combination of featurescript and the REST API. A simple example document is here…
-
Customizability in Keyboard Shortcuts - Changing "Onshape Controlled" Shortcuts?
Hello Onshape Users and Team, I'm coming back to Onshape after using a different CAD software for a handful of years, and have gotten used to a system or set of controls for navigating the environment. While I do have the ability to keybind most functions, many fundamental controls are "Onshape Controlled" and cannot be…
-
Does OnShape CAM support part holding tabs?
Hello, I'm working on a CAM setup to perform a simple profile cut of a part on a CNC Router and would like to add part holding tabs to the outside cut profile. Is there a setting to enable these in OnShape easily or would some form of workaround be needed? Thank you in advance for any pointers!
-
iPad + Apple Pencil tips & usage?
I'm really enjoying OnShape, but finding it a bit frustrating on my 9.7" iPad because about half of what I do is way easier with the Apple Pencil, and the other half seems to require touch gestures with fingers. It's awkward to switch back and forth frequently. I may just be missing some ways to use the Pencil. Can anyone…
-
Anyone use a swiftpoint z2 mouse?
Just wondering if anyone has a profile for a swiftpoint mouse.
-
Exploded views should not be part of the revision management.
I need the ability to make a drawing of an already released file with a new exploded assembly view. I do not want to update the revision of the part when I want to add multiple views to the already existing part. For example, I have an assembly that is at Rev 1.4. I'm using this assembly in multiple larger assemblies. All…
-
I can't get a cycloid's platted points to scale in a uniform way
How do I get the points to scale without distortion? This section of my code takes a bunch of input parameters and creates a parametric function that plots points that are part of the line for a cycloid. The if statement, if (eclen), is a boolean that, when true, is supposed to scale the points by adding (ec_shell-cymod)…
-
Can you configure a variable studio to be visible or not visible in a part studio?
I am working with parts that have various parametric variables, and a certain type of the product is determined by those variables. In the master part studio, I have several sketches that define the product, and types have about 10 variables that determine the shaping. My goal is to have set configurations that are of a…
-
Detail Drawing "Basic Drawing:Exercise"
Hello, new to Onshape, but I have experience in multiple CAD programs (AutoCAD, Inventor, NX, Solidworks). I am starting to work thru the basic Onshape exercises to get a grasp on interface of this tool. I have made it to the first exercise in the DETAIL DRAWING, and for some reason cannot get the drawing template to show,…
-
i have a second voucher code but its not giving me a new test for the certification exam, what do i
-
Editing Hole Callout formula
Counterdrill hole (Countersink hole + Extra head clearance) is an option available in other CAD software, but doesn't seem to be an option with Onshape currently. I have cobbled together a feature script based on Hole feature that does the job geometrically, but the callout is as if it's just a Countersink hole. I'm…
-
How do you toggle between drawing sheets on an android phone?
I see a tiny icon in the middle of the left side of the screen, but I can't get it to open by tapping it. I'm unable to navigate to any of the other drawing sheets. I see a reference from 2018 saying to use the up and down arrows, but that isn't an option on the phone.
-
Connections array for opLoft not being applied
Hello! I have been working on creating a featurescript to loft together two identical spur gear profiles at a vertical and rotational (around Z) offset, creating a hyperboloidal profile. the gear profiles generate without issue, and there are no errors in the featurescript, in the code or generation, that are reported. The…