Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:
- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Onshape Forums
Discussion List
-
Unwatned shapes locked to any document I create or open
I did a test with patterns, and dimensions, then accidently hit a shortcut, this caused these shapes to be "hard locked" not removable, and they show up in every new document I create, and even in other document saved before, that is very weird. I can not find a way to unlock and delete this shapes. And as mentioned, if I…
-
How do I make this geometry work?
So, I've been trying to make a realistic ionian column and the main feature of those is the volutes. They have some unusual geometry and I am stuck because Onshape refuses to make sweeps that intersect themselves. Does anyone have suggestions? see the volutes on the photo for reference
-
reportFeatureInfo formatting
Hi, Is it possible to add a carriage return / linefeed to reportFeatureInfo custom strings? I've tried \n, \r and <br> but they seem to be ignored? Thank you.
-
Question for classroom potential
Good Morning, I was looking into switching my classes from AutoCAD to using OnShape and I was curious if I were to do that do I need to have my own projects and drawings to teach from or is this already setup to do that. Currently I am teaching using AutoCAD 2024 in a classroom environment. Our classes run 2hrs and 42 mins…
-
How can I display a grid when I am drawing an sketch?
When I am in sketch mode and drawing a line, how can I know how long my line is? I think for 2D sketches it would be very useful to have a grid that you could use as a guide. Is this currently possible?
-
Connections array for opLoft not being applied
Hello! I have been working on creating a featurescript to loft together two identical spur gear profiles at a vertical and rotational (around Z) offset, creating a hyperboloidal profile. the gear profiles generate without issue, and there are no errors in the featurescript, in the code or generation, that are reported. The…
-
Surface Text Cut Out
I am unable to Cut Out the surface text. I actually need to cut the test out all the way through. Any help is appreciated..
-
How to avoid one part, penetrating another part in assembly in onshape
Hello, I have made a flat surface plate in onshape, and an another part also, but i would like the surface plate to be "hard" so that the orter part penetrate it in assembly, and "stick out" on the other side, is there a way to do this? I have attached a screenshot where the plate is shown, with the other part sticking…
-
How to make Teardrop shape?
Hello all, Currently, I have this design by sketching an ellispe shape and then extruding it, I've been tinkering with on shape for the past three hours, and can't figure out how to generate a "teardrop" shape from this - I want both of the poles to collaspe to a point as shown, along the length axis, however, I want the…
-
Putting Text Information in Model
********** I'm not posting to debate so please do not respond trying to convince me of anything, just move on (even if you're a dev). ********** I need some way of putting text information in the CAD model. Normally, I would make heavy use of 3D leader text and general notes, but OnShape lacks this. I looked for something…
-
Split part - What determines which side is which?
When using the Split feature to split a part, I get two parts, great. But one of these parts seems to have the same "identity" as the original, and the other is "new". What determines which side of a split is the old part and which one is the new? Can I control it? My main reason for asking is that inserting a split into…
-
Featurescript: Editing Logic Function does not update length parameter in Feature UI
Have looked through the documentation as well as the Spur Gear example code, but I seem to be missing something obvious. I would like for the Logic Editing Function of my Custom Feature to change a numerical value entered by the user, and for this updated value to be reflected in the Feature UI dialog. When the user…
-
Cheating
How do I know if students are either sharing projects, or getting them off the internet? What is a way to foolproof students from cheating?
-
How do I move an object to a specific coord
Total newbie here. I noticed that with transform when you select xyz you can only select a distance from the old object. Is there any way to select coords? Like to move to the origin you select 0,0,0
-
Flatten eliptic arc based object
Dear colleague, is there any hint-workaround for creating a flattable "something" of the attached object such that it could be finally cut on a laser cutter? All my attempts (extruding solids, thickening surfaces, extruding/thickening metal sheets) failed so far. I tried to insert a link to my document but it says that the…
-
How best to model a part for 3D printing
I‘m trying to model a part based on sheet metal so I initially used the sheet metal tool to create the bent part but then found that I couldn’t chamfer the model edges. I reverted back to a sketch and extrude model but the interface between the parts at the bend point create problems when trying to chamfer. Any advice on…
-
Multi-Part Part Studios no correct answer
I have tried to do everything step by step, but I dont see the right answer. I have 0.712 mass, but there is no such option. Could somebody point me out what to check? I have double checked everything.
-
Vouchers Status
I bought vouchers for the Certified Onshape Exam for my Technical Drawing class and one student has already taken and passed the exam. Is there a way I can see the voucher statuses and grades as the students complete the exam?
-
Making a vase and a circular pattern suddenly starts acting weird 3/4 of the way around
Vases | Part Studio 2 So I was following a tutorial on creating vases for 3d printing and the work flow is to create your base shape, revolve a cylinder around it, put a helix on the cylinder, use the helix and one of the cylinder's base lines to create a spiraling surface (looks like an Archimedes screw with zero…
-
Complex face blend
Hi there I'm trying to create a smooth face blend between 2 chunks can you help me, how can i achieve it sorry, i don't know the best template for asking questions for modeling thus it is in free form if you need details to help me, i'll be glad to provide them!
-
Two parts not same dimensions at split point. Why?
I am attempting to 3d print this part. I needed to split it due to printer restrictions. When I printed the two parts the connecting surfaces were of different diameters and did not fit together as i was expecting. I am not sure why. Is there a setting or a "gotcha" that is drinving the two parts not to "marry up". Any…
-
Problems doing Exercise 2 of Introduction to surfacing, step 4
I have 2 problems right out of the gate: and
-
FeatureScript Video Walkthrough Series
Hello everyone, I've been wanting to make some FeatureScript training content as of late, so I decided to record a series of videos where I create a new FeatureScript from scratch while talking through my thought process and code as I go. The full Youtube Playlist is here:…
-
Non-Hybrid Modeling
I am a professional engineer with over a decade in modeling experience on multiple platforms (solid edge, solid works, Inventor, and Catia). A large part of my experience with complex modeling was using CATIA with which I excelled with robust design models. During this time, I almost exclusively used what I have come to…
-
use variable in assembly
Hi, I've been trying to use variable in assembly, but I'm not successful. Who knows how can use a variable from part in the assembly? Thank you
-
Not fully defined?
My uneven sided hexagon has all sides and angles defined but is still not fully defined in the right plane. What am I missing?
-
Adding Thickness, Length and Width as BOM Properties
I've seen this requested a few times, or at least mentioned, but haven't dug in deep enough to see if a solution was made. So I took a stab at it. This is primarily for those of us who design around sheet goods, like plywood, MDF, acrylic, etc. Using this FeatureScript, you can automatically generate the values for a…
-
onshape planes
how do you know you are supposed to sketch on which plane and quadrant
- not defined sketch - Any chance someone can run me through step y step how to fix this? Thank you
-
Importing frame profiles
Hi, I want to draw a frame in FS using a profile from a library. I have a Frames Profiles library from which I've imported the relevant profile into my feature: PROFILE::import(path : "f291b1eeec6c54398a176be9/f64054ef666d4cf2737b88c5/356fb47928ccd52d07b1cf3e", version : "d6585a638c0d2d07f1a1c625"); I then build the…
Categories
Popular Tags
- featurescript 890
- drawings 614
- assembly 444
- sketch 429
- assemblies 379
- improvements 358
- help 331
- part studio 322
- configurations 307
- feature script 301
- Sheet Metal 296
- drawing 254
- how to 250
- feature request 242
- mate connectors 235
- loft 216
- export 209
- api 200
- dimensions 199
- extrude 196
- sketching 195
- voting 187
- variables 180
- improvement requests 174
- mates 162