Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:
- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Onshape Forums
Discussion List
-
Copy all parts on a face over another one.
I have an extruded rectangle and along one lateral face i have 30 cylinders in contact with face. How can i easily copying on all the other 3 faces?
-
How do I define this spline?
I'm trying to make a tentacle monster for a project and can't for the life of me figure out how to define the tentacles. I used a spline to create them, and lines to cut off the excess where they met the body. Any help is appreciated!
-
Cannot select entire circle to extrude cut
Having a very strange issue here, I created a design that mounts a pedal on a curved surface using 3 screw holes, it worked great for the throttle pedal. I decided to use the same model for the other two pedals, as the curvature of the pedal is the same but the mounting holes needed to be changed. I revised the design,…
- como recuperar contexto gráfico en un nuevo part studio cuando este desapareció?
-
FeatureScript
I am modeling the wind of a DeHaviland MOSQUITO Mark-IV: As you can see I am unable to unite all the surfaces because the profiles on the upper a lower parts of the airfoils do not line up properly. I was watching a YT video put out by "Teaching Tech" whereby he shows a FeatureScript to accomplish this task; however, I am…
-
NEED HELP
IM TRYING TO MAKE A PART FOR A STAGE PROP FOR MY DAUGHTERS PLAY IN 3 WEEKs. I cant seep to get the internal tubes to work, i built them using loft because I couldn't figure out how to use sweep with out errors, it looks good until i import to slicing software. then the tubes go crazy or go solid. thank you in advance.…
-
Tangent connector
Hello everyone, I'm a "beginner" who uses Onshape in my hobbies. In “Assembly”, I want to “roll” a ball in a ‘rail’ made up of two 90° strips forming a sort of “V” groove or dihedron. I use the “tangent” connector, but I can only select the ball and one plane, not two as I would “intuitively” tend to do. I've spent a lot…
-
how to convert an extrusion and adjacent surfaces into one flat pattern part
I'm trying to make Loft 15 and Loft 16 into a continuous part with extrude 2 so that i can covert it into a flat pattern with bends and then extract a dxf file so I will be able to cut it out on my plasma table, but for the life of me I can't figure out how to do this. Am I missing something or will I just have to cut…
-
Sequential Extrude Thin Multiple FeatureScript?
Is there an existing FeatureScript that would allow you to input a list or sequence of sketch profiles to extrude thin in a single feature? I use onshape for creating 3d printable objects, many of which are decorative or contain decorative elements. I know onshape is probably not the best tool for the job here but I love…
-
External table content, creation, and modification
Apologies if this question has already been asked or answered in some form — I took a look around the forum and couldn't find anything that really fit my query. My ultimate goal is to add additional thread specifications to both the Hole and External Thread features. It seems reasonable to do this by creating a new table…
-
Error with extrude on point selection
So I just started feature script and was going through the lessons, however when I tried to do create a extrude on a sketch that I made on a point it failed However when I remove the extrude I can see the sketch so why doesn't this work? Here is the doc…
- delete
-
Advice on designing garden decking
Hi all, I want to design some garden decking but I'm not sure how best to structure the document(s). Essentially I have a boards layer with straight boards and bull nosed edging boards. Than a layer of rafters running below the boards. A layer of joists running below the rafters. And then a layer of height adjustable feet…
-
Parts library that provides for each part a simplified and full model version
I'm trying to make a parts library that provides for each part a simplified and full model version(configured via a configuration checkbox), since these parts get used in assemblies with up to 2000 parts and subassemblies so the primitive count is really high and some computers struggle. However I've encountered the…
-
Part Revision Number on Drawing
Hi guys I'm struggling with getting the revision number on my drawings since I activated the pro-license. When releasing a drawing together with the part both revision numbers are changed. But the revision number is not loaded into the drawing: only a "-" is showing. But when making a version of the part first and then…
-
Sheet metal flanges on parts with corner chamfers
I'm learning OnShape and the flange tool behaves differently than how Solidworks would generate it. Any reason why the flange tool basically deletes the chamfer in this situation? It's not that I can't think of a workaround for this using partial flanges and some extrusions, but seems like a lot of extra commands for…
-
Embedding interactive model into webpage
I have just transitioned from Fusion 360 to onShape and loving every moment of it. One feature, though, I would love to have is the ability to embed an interactive model in a webpage for documentation purposes. Fusion has this feature to embed models in iFrame. Is there any hack or workaround for this?
-
Configuration Variables and Tables
Hi, I have a simple part that is a custom connector. I have two configuration variables that define the size of the two connecting ends (e.g., 6 mm to 4 mm). The size of the part changes with these values. Is there a way to have a table in a drawing that shows values for a dimension for different combinations of these two…
-
VEX 19-Tooth Rack Gear misaligning itself upon fastened mate to 12in linear slider track
I am making an assembly with all the gear relations in it so I can fully understand how they work, and during assembling the rack&pinion setup I found the 19-tooth rack gear becomes rotated by about 4.5° when I fastened it to the linear track(this happens regardless of where i put the mate). I can offset rotate the fasten…
-
How do I edit an object imported as an STL file?
servo_mount_disc (1).stl | servo_mount_disc (1) I have an STL model I imported, and I want to remove the flange, leaving only the cylinder with interior teeth. I tried adding a cylinder and using the Boolean function, but that doesn't seem to work. Can anyone tell me what I'm doing wrong?
-
Slider Mate Error
I am building a 4 cylinder engine but i have this problem, when i try to connect the top of the piston to the guide sketch i made using slider mate the piston moves up and out of place making the piston not spin on the axis. It worked before but i accidently deleted that and now when I'm trying to redo it it wont work. i…
- beginner Here, can't figure out how to make a hemisphere or sphere. thanks!
-
Slanted plane sketching problem
Hi! I'm basically a complete Onshape beginner, so please bare and be patient with me. I am trying to create a tape dispenser (pic) in onshape, right now working on the body. I've managed to make the bottom part of the body, on which it can already be seen that the front and back have different widths, and the bottom and…
-
Updated Spur Gear FeatureScript
One FeatureScript I've used quite a bit is @NeilCooke's spur gear FeatureScript, which is always useful whenever I need to make custom gears. However, I've found that the editing logic can be a bit annoying, so I made a few modifications in order to make it more intelligent and easier to use. The Updated Spur Gear…
-
Trying to create a mesh of holes across my entire spherical surface
Hi all, I've created a half hemisphere with a wall thickness of 0.5mm and I'm trying to perforate it with 0.5mm holes all over. So far I have used a circular pattern to get a ring around the top, but I can't figure out how to propagate that pattern across the rest of the surface without recreating the approach I used for…
- how do i go into sketch?
-
Assembly into an assembly
I have imported an assembly of parts (machine) into another assembly of a container I have done this in the past with no problem Today I cannot rotate the machine Nothing is fixed It just won't rotate in the new assembly any suggestions please
-
How do I combine two shapes to be able to then subtract another?
Hi, I am a beginner and am having trouble performing a particular function. I have made a part and then bent it using the bend sheet metal function + extruded the outcome. I now want to boolean subtract (dark blue) but the program seems to treat my bent sheet (light blue) and the extruded element (grey) as two parts. I…
-
How do I import and edit an STL file? It only appears as a file label.
I need a GoBilda Dual Block Mount for my robot bumpers, and am trying to get one from public models.
-
HELP I don't know what I've done wrong!
I used pierce to make sure everything is aligned but it still doesn't work with guides. It works without them, but I don't know what to do to get them to actually work. S7838293748329237473M2I2S2S2I2O2N | Part Studio 1
Categories
Popular Tags
- featurescript 890
- drawings 614
- assembly 444
- sketch 429
- assemblies 379
- improvements 358
- help 331
- part studio 322
- configurations 307
- feature script 301
- Sheet Metal 296
- drawing 254
- how to 250
- feature request 242
- mate connectors 235
- loft 216
- export 209
- api 200
- dimensions 199
- extrude 196
- sketching 195
- voting 187
- variables 180
- improvement requests 174
- mates 162