-
3D Print Strings Badminton racket keychain
I'm trying to 3d print a mini Badminton keychain. How am I supposed to create these strings in the racket in onshape?
-
Suspension mechanisms
Hello, I am a high school student working on a project where I have two wheels riding on a beam (one wheel is on the top, the other is on the bottom. Kind of like a rollercoaster setup). Every so often, however, there is an interruption and I have made a ramp for both wheels to go around it. I have made a suspension…
-
How to extrude a feature horizontally from an inclined surface without it following the face normal?
Hi everyone, I am designing a model with an inclined (angled) surface. I want to project/extrude a feature (like a cylinder) horizontally (parallel to the Top/Global plane) starting from this angled face.Currently, when I use Loft or Extrude, the software either forces the extrusion along the face normal (90 degrees to the…
-
Transfering from a student to personal account
I have been using Onshape for nearly 3 years now. It is perhaps the best 3D functional CAD software I have tried, which is why I have persisted working with it. I have learned 3D CAD here, and started my 3D design and printing business using Onshape. Currently, I am on a student plan, which will expire soon as I graduate…
-
フォーラムに投稿した文を編集する
フォーラムに投稿した文を、訂正したり、編集したり、もう一度投稿前に戻って編集したいのです。 が、できるのでしょうか？ できるのなら方法を教えて下さい。 なお、日本語ではボタンの名称に誤訳が生まれやすいので、画像でやり方を説いてほしいです。 例えばフォーラムの回答済みを質問者が設定するとき、回答済みを意味するボタンに「サポート」と表示されますが、日本人には回答の終わった意味を示しません。今お手伝いを要求している意味になります。
-
Enterprise training for students.
Hi, I have been using Onshape for past few years, and with all the help from Onshape Tutorials and community i have enhanced my skill level from a rookie to professional. The demand is growing for "Onshapers" as the organizations are adopting Onshape for design and other uses. As a students version user i wonder how…
-
Skateboard design truck design question
Greetings One thing I found weird was that the lesson makes you use 2 fillets on the same part. The Truck Baseplate has fillets 2 and 3, even though you could have done it with only one fillet. Both fillets use the same radius and I even tested; it looks exactly the same if you just select all the faces with fillet 2. Why?…
-
When will CAM studio reach student accounts😭😭
we have a cnc, and would love to try out onshape CAM, but we can’t buy a subscription as we are part of a school😭😭😭
-
Why are all parts suddenly reporting errors about over-definition?
This is a mechanical grip that uses rotary lamination.
-
How can a student leave a class?
How can a student leave a class?
-
Bom Template
Im currently working on a student project and would like to add the name of the parts as a BOM entry to multiple assemblies for documentation purposes. The setting for templates is not displayed even though it should as im subscribed with an edu license, the file is marked as edu is this intended and the wiki not updated…
-
Render Studio Access
Hello, I was wondering how I can enable/access Render Studio. I am on Enterprise but am not sure how to enable this. Any pointers would be great. cheers!
-
API - export part studio?
Hello. I'm trying to create a one-click export current state of a part studio using API and extract downloaded file. So far it kind of works: it downloads zip file and extracts it, however the downloaded model is not the same as in part studio, because of the configuration (I'm using this document for my tests): how do I…
-
Strange Undefined (?) Sketch Arc Never Goes Away
Hi, I'm a student designing for FRC team 2415 and I've discovered a weird error that I don't even understand. I was designing a gusset for our robot when these unselectable, omnipresent undefined arcs appeared in the parts studio. When I checked the assembly I had used the part it, they appeared there too! Only information…
-
How to see my certificate?
Hi, could anyone guide me on how to take a look back on my basic introduction certificate that I have completed. I want to share it but I don't know where I could find it back. Thank you in advance.
-
PCB and CAM studio
i am an onshape education subscriber. and in a recent update they made the PCB and CAM studio available to education subscribers. and i am wondering, how do i access these new features as they seem to not appear on the drop down bar when adding a new tab.
-
onshape planes
how do you know you are supposed to sketch on which plane and quadrant
-
Any Feedback
I am trying to design a remote control plane, and I have been at it for a while, but I have not found any dedicated tutorials for how to do such a thing in Onshape, so I would love if another set of eyes could look over it and give me pointers. This plane is designed to be a pusher UAV similar to small military…
-
How can I resize a large number of sketch entities without changing their location?
I am working on a part studio where multiple parts with linear patterns of holes need to overlap so the holes maintain their concentric relationships. I have done this by taking the original sketch with my hole pattern and copy/pasting it into other sketches from which I am extruding the various parts. I assumed that the…
-
house help needed
https://cad.onshape.com/documents/5e0aad5338049d58e998649d/w/4329a036c2204f750e842286/e/cc4f8ca8c6a8753bb66f7bdf?renderMode=0&uiState=67e60a11f2c902141a6ae0e7Error hello all this is a house i am working on for a school project and i am not sure how to solve the errors if anyone can assist please comment your email and i…
-
assistance needed
https://cad.onshape.com/documents/5e0aad5338049d58e998649d/w/4329a036c2204f750e842286/e/cc4f8ca8c6a8753bb66f7bdf?renderMode=0&uiState=67e60a11f2c902141a6ae0e7Error hello all this is a house i am working on for a school project and i am not sure how to solve the errors if anyone can assist please comment your email and i…
-
I need help with a project with coursework
My goal is to make something that will filter out polymers from the ocean and i`ve came up with a brush wheel that`s connected to the wall of a harbour but i need a sliding hinge something on the lines of the image below Please send a message before tomorrow I`m kinda in a rush to meet the deadline
-
Never received Onshape Associate Certification Exam
I took my Associate Exam on Aug 13 and never received my score back, is there a place where I can check this?
-
401 error when Add Feature shape API is invoked
Headers have access & secret key but when invoked through python code we receive 401. Please suggest.
-
measuring distances for extrudes - beginner question.
Hi, in what way I can know how to set both of the extrudes that they will be flushed and be flat surface? it doesn't seems practical to go to each one of the extrudes and do the math yourself to make the lenthg of the extrudes match to a certain point. Cant you see the measures on the extrude tab? I'm sure there is a…
-
Onshape learning center help
Hi, I need help understanding the Onshape learning site. There are courses mixed with different levels of difficulty, and I can't find the appropriate path I need. I've been learning the software for a few weeks now through youtube , and I want to focus more on the stage after sketching. is there a clear list of the…
-
Variables within Configuration - HELP!
Lets say I have a box, and the box is defined by L x W x H... I originally made these variables so I can adjust as I needed on the fly with the variable table. But what I didn't realize is if I changed the variable in another part studio, it would change the dimension in every part studio. Since I am trying to have 4…
-
Flatten Boat Hull
I'm new to onshape and need help. If I have a boat hull, what tools do I use to flatten it so I can lasercut it? (Make a hollow 3D shape into a flat, printable, 2D shape)
-
laser cut boat hull
How do I make a boat hull, and eventually laser cut it? I want to make it in strips on the side, using laminate/veneer (not sure of material yet). This is prototype, actual one will be made with 3 mm wood
-
Need help splitting long part so it can attach after
Hi Everyone, First of all I would want to appologise as I'm a complete beginer and the way might be very simple, but I don't can't figure out how. I'm trying to make a gift box for my wife in order to fit an Apple watch box in the gift box. Original project is the following: animal crossing box | box base (onshape.com) I…