Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:
- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Onshape Forums
Discussion List
-
Help with animation
Hi, wanting to animate of how to assemble a connector….so wire pushes through a locking mechanism which then closes from being like 60 degrees open, back to 0, then the insulation is cut off to expose the wire, then a protective cap goes over the end to protect the wire. They are all cyclindrical and connect in a straight…
-
Files to download for onboarding tasks
Hi, Could you please let me know where I can find the files required for the onboarding tasks? For example, I need a DXF file to proceed with the tutorial when creating a drawing.
-
Part history error
Today I encountered a strange issue with part history. To baseline, I am proficient with onshape, use it professionally, and am the admin for my company for the time being. I have a fairly complex document that I have been working in for some weeks. Today I spent part of the day working on one part studio, building it out…
-
Emojis within feature notifications 😀☠️💣
Nothing new, but I would like to point out that we can put emoji within feature warnings! .
-
Quickstart: can't get the pin in the vice hole, using mate
I"m in the QuickStart document, in the Assemblies & Mating section. I can't get the pin in the hole using the Mate, despite trying several times and rewatching the instructions. The pin always ends up outside the hole, as shown here. The URL is…
-
Extrude preset
how can I change the extrude preset, it is set to thin witch is rather annoying I want to set it to face
-
Problems with Onshape
Hello, Our team is encountering an issue with Onshape where assemblies won’t load, and one person appears multiple times in the same assembly. We have about seven people collaborating on different mechanisms, and this is making it nearly impossible to get any work done. This is our first year using Onshape, and we haven’t…
-
Looking for some help with release packages in the API
I've been digging into the API to manage our CAD data and I've been fairly successful in building a client that can access assembly BOMs, read/edit metadata, export files, etc. I've run into a roadblock with trying to generate release packages. This section of the API does not seem well documented. I have several questions…
-
Pattern (fill) across adjacent faces vs. merge adjacent faces.
I am interested in recreating this pattern of a lattice across multiple adjacent faces. My difficulty is in duplicating the way the lattice conforms to the bends/fillets. Performing the straightforward sketch-extrude-fillet sequence results in multiple adjacent faces and presumably I need to build this as one surface (I…
-
No sound
I do not have any sound on some of the lesson modules. I cannot find the menu bar to stop and start the video and to control the sound.:?
-
opTransform with sketch text will fill holes.
This image shows what happens when extruding (with opExtrude) after a opTransform (in red) versus directly (in blue) . Here's a simple code to reproduce the error : ``` const targetPlane is Plane = evPlane(context, { "face" : definition.target }); const planemap is Transform = transform(sketchPlane, targetPlane);…
-
Frame Tags - Why do tagged profiles not appear in the Frame feature?
We are trying to build a custom library of existing profiles used in our products. When I tag a sketch and try to use it as a Frame profile in a separate document, the tagged profile doesn't show up. I can only see the original sketch. I have tried versioning the profile once tagged and I am obviously using these in a…
-
New FeatureScript: 8020 Profile Generator
Hi, all: We continue to find that FeatureScript is a really powerful way to make Onshape easy to use. We've created a FeatureScript that can generate all 80/20 Inc(c) profile sections ( all 111 of them). Using this feature, you can extrude any length of any profile you wish. Multiple point extrudes are supported as well.…
-
Exported drawing includes an outer box
I want to export a .SVG to use in my laser cutter. My workflow is to create a part, create a drawing of the part and export as .SVG. I am able to use a blank drawing template (remove all the borders and title block etc) but the exported .SVG still contains a box on the page limits. I have tried to remove in Inkscape but I…
-
2025 Onshape Learning Projects Refresh – New Videos, Workflows, and Design Intent Lessons
I'm excited to announce that I've updated all Onshape Learning Projects in preparation for the upcoming school year. Here’s what you can expect from the new content for each project: Mastering the reading of engineering drawings Understanding and implementing design intent Modeling parts and assemblies using Onshape…
-
What does this mean and why is it happening?
I get this error message when trying to insert a sub assembly into my main assembly. Why is it happening and how can I stop it happening?
-
problem with fill
the fill is protruding outside of the projected curves by just a little and is making it difficult to thicken does anyone know how to fix this or am I just stupid and I have to restart. thanks…
-
Bug while exporting a transformed STEP file: non-manifold edges
Hi, I'm new here. In case this post is double.. I wrote it once, but it didn't appear. Hopefully this one will. I have a model that works fine if exported as STEP file until I add a final transform/rotate to it (so it is already oriented in the way that seems best for printing it). However, once I add the transform/rotate,…
-
Body
Im new on here and do not know how to do anything on here. I have someone I need to make a body for, and this is the only app on the computer my school allows me on at this time. Can someone possible make this for me? They don't want the whole body in one, keep it all together but moveable so they can make it move like…
-
Onshape Professional Exam
I am a HS teacher and want my students to take the professional exam. Do students need to stay for the entire 180 minutes or can that be broken up? I only have students for 90 minutes at a time and I would need to coordinate to have them for longer.
-
Onshape API: How to get the source Part (Part ID like #JFD) of a Derived part?
Hi all, I’m trying to determine—via API—from which exact source Part a given Derived part was created. Concretely, I want the short Part ID from the source Part Studio (e.g., #JFD), not just the document/element pointers. What I’ve checked so far I can read the target Part Studio’s feature list (GET…
-
Is there a feature script for optimizing holes for 3D printing?
I'm trying to find a feature script for turning standard holes into adapted holes for FDM (FFF) 3D printing when they are aligned parallel to the build platform. The goad would be to avoid defects such as the picture below where the hole top is done in overhang: By using a simple teardrop design: Has anybody seen / used…
-
[NEW] Keyway Groove FeatureScript
With our recent release of Keys to standard content I created a Keyway groove custom feature to automatically cut the appropriate size grooves for a given shaft or hub diameter. ANSI and DIN included! Add to your toolbar:…
-
How to Calculate laser cutting length ?
I need to see the total length of the sections to be laser cut on a piece of sheet metal. I had to select each element individually to create the length shown in the image, which took a very long time. Is there a shortcut to this process?
-
A new one for help😊
i wanna make this pattern on a curved surface Can anyone help so i Can learn more of this awesome program 😀 I tryed but nothing close 🙃
-
Badges-Maxxing on the onshape forums
Does anyone know any easy badges to collect for an enthusiast such as yours truly ? Much Appreciated -The No.1 Badge Boy on Onshape.com
-
Menu bar
Hi all, Sometimes I get a menu bar appear across the bottom of the screen (see attachement), particularilly sometimes when I start up. As soon as I start to work it disappears and sometimes it isn't there at all. I'm not sure what I'm doing, but is there a way to turn this menu on and off? Thanks in advance, Lee
-
How to prevent merging of different frames when they touch
Hi all, I have created a simple frame and then built parts on top of it (all in the same Part Studio). The main frame in red has been created using a rectangle in a sketch then the Frame feature with ISO rectangular tube. The tube 1 in green has been created from another sketch using a single line. I have used variables to…
-
Unhide Components
I have some parts and assemblies within a larger assembly.I want to unhide one of the assemblies. When I click the eye next to the assembly, nothing is shown. So to unhide the assembly, I have to expand the assembly in the tree and also every sub-assembly and click each individual component to show it.If the assembly is…
-
Looking to loft along a curved path
Not sure if it is possible but I am looking to loft and loft around this curved path
Categories
Popular Tags
- featurescript 890
- drawings 614
- assembly 444
- sketch 429
- assemblies 379
- improvements 358
- help 331
- part studio 322
- configurations 307
- feature script 301
- Sheet Metal 296
- drawing 254
- how to 250
- feature request 242
- mate connectors 235
- loft 216
- export 209
- api 200
- dimensions 199
- extrude 196
- sketching 195
- voting 187
- variables 180
- improvement requests 174
- mates 162