-
I am unable to create classes.
I am unable to create classes. The option is not available when I click on CREATE. Any advice?
-
Improvements to Onshape - July 18th, 2025
Welcome to the new release! This release contains a wide variety of features and improvements touching virtually all areas of the product: Configurations, Assemblies, Surfacing, Drawings, Data Management, as well as CAM and Render Studio! We hope there's something out there for everyone! CAD IMPROVEMENTS CONFIGURATION…
-
'Breaking up' a composite part imported from a STEP.
Hi. I have a vendor-supplied STEP that imports as a composite part of surface bodies, even if 'create composite' is NOT checked on import. I'd like to do some work on the surfaces to thicken them, but I cannot find a way of splitting the imported composite back into its consistutent surface features. Help would be…
-
Sketches Created in Featurescript No Longer Appearing Under Feature
I have a feature written in Featurescript that creates a number of sketches. Previously, they were all showing up under the feature's details (when expanding the feature via arrow), but something changed and now they aren't. I'm not sure what changed. What determines whether they show up? I don't get any arrow at all now…
-
Custom Feature: Frame Trim/Extend
I suspect this will get added to std at some point since it's a common feature to frame generators in other CAD packages like SW and Inventor, but while we wait, here's a quick and dirty upgrade to frame trim that allows frame profiles to be extended to faces if the face plane doesn't intersect the body. It's essentially a…
-
Inserting a part studio, in an assembly, in another dodument.
Hello, i have a issue with the following: I have a document where i have made an assembly, with part studio's from the dame document, BUT i ned to also insert a part studio from another document. I use "other documents" in he function "Insert parts and assemblies", to get the part studio from the other document that i want…
-
Get Drawing ElementID from PartID
I am trying to get the elementID of a drawing from a partID. What ive been trying is to first fetch all drawing elements in the document, and then to try to resolve all of that elements references using /appelements/d/{did}/{wvm}/{wvmid}/e/{eid}/resolvereferences The issue is that it resolved the reference but says the…
-
New Feature - Bridge Overhang (for 3D printing)
https://cad.onshape.com/documents/9db73769726a7c1968a9eec6/w/a94665f4983acd43414a91e8/e/f98a3b9885864c1f11d186d6 This tool lets the user print normally difficult geometry much more cleanly. Generally, when printing geometry with counterbored (or pocketed) geometry on the bottom, the resulting print develops a solid amount…
-
Render Studio Access
Hello, I was wondering how I can enable/access Render Studio. I am on Enterprise but am not sure how to enable this. Any pointers would be great. cheers!
-
Splitting and deleting 3 overlapping lofts
I have this part with 3 overlapping lofts and I am trying to delete all the internal parts so all are open. I have tried splitting multiple entities in one operation, splitting seperately, but I keep getting "Selected entity does not split selected parts." errors. Can anyone help me with step by step instructions?
-
FeatureScript IDE (Secret menu) 😎
. While doing some FeatureScripting earlier, I was late for a meeting and reached over to grab my headphones and accidentally opened up a secret menu. After arguing with GPT about what the hotkey could have been, I systematically started pressing all the logical hotkey combinations for an IDE (Integrated Development…
-
Some built in functions are not being found, how do it fix?
im trying to use indexOf but it's not pre populating or working. I imported common fs, but still an issue. How do I fix this?
-
What would be the best way to have an assert on a variable
Is it possible to give a warning if I'm about to do something stupid with variables? For example. If I'm designing a block and I put in a line diameter of 12mm and I have a sheave width that is <12mm it would inform me that the sheave width must be greater than line diameter? I mean I suppose I could model the rope and it…
-
How do I export Ball Mate to STL?
I am a newbie in cad and 3d printing. Just started using it because my son gave me his old 3d printer. I created ball mate and an assembly, but don't know how to export it? I exported assembly but in Prusa slicer it does not lay flat. How will printer print a ball in the body? or do I have to print Body and ball separately…
-
Modified off-the-shelf parts
In SW, I would make an assembly, then use assembly features to make the modification. Then in the drawing I can use a BOM to show what components went into the modified "assembly". Often there would be only one line in the BOM. In OS, I can use a "Derived" feature in a part studio to bring in the components, but I see no…
-
Creating an angled connection between two cylinders
I'm trying to create a part which connects two cylinders. My approach is problematic. It for example does not allow me to use the boolean tool to union the connection and the smaller cylinder because they do not actually connect. What would be the correct design approach to tackle this problem?…
-
External thread problem
Hello everyone, I'm having a problem with the external thread option. The error message I'm getting is "A mismatched thread size was selected." The thread sizes I need are ANSI, 7/16, 14TPI. Thank you very much.
-
Face Blend gone
My Face-Blend tool dissappeared in one of my Part-Studios. I cannot get it back. It does not show up in "customize toolbar" and even the shortcut for Face-Blend does not work in this part studio. In every other document it works fine. How can I get it back? Thanks
-
Intro to CAD Updates
Hi everyone! We have been working on some updates to Intro to CAD for clarity and usability and are happy to announce it is ready for this school year! If you already have copies of the documents, you WILL want to go in and make new ones. One of these updates was for the scavenger hunt and the parts won't all come through…
-
How to make cutouts on sphere follow the curve?
Hi everyone, I'm trying to make a model of a smooth tennis ball, but I have no idea how to make the curved grooves on it. Is there some way to sketch out the curve and project it onto the sphere, then sweep/extrude out the cutout? Thank you.
-
Invalid Normal Until a More-Distant Point is Used
What is going on here? I have 3 points that are co-linear (start, mid, end) that produce an invalid normal when used with this code. If I make a 4th co-linear point that is farther away, it works fine. It seems that when too close together it is for some reason "close to parallel". Why does OnShape let this sort of…
-
fully defined
how can i get this fully defined
-
How can this not be defined?
Hello, all i've done so far is chose a plane to sketch, selected rectangle and drawn it. How can that simple shape not be defined? I have been using Onshape for a while but purely on a super low level without anything complicated, i've never seen this error message previously. What am I doing wrong? Thank you
-
Getting to "fully defined"
Reference document: Octagonal pedestal - multipart https://cad.onshape.com/documents/28044d76fae64781bc7c9c46/w/f0b392a79f784531824bf25d/e/f31eb6eef1ea46ceb4d1ee03 Part Studio: Parts Rev 2 Sketch 1 I've created an octagon shape with two lines using offset. To this point, the sketch is fully defined. I added a box at the 9…
-
Cookie Stamp Curved and INVERTED OR FLIPPED Text
Hello, I can model a rubber stamp :) And I know how to create curved text :) However, in 3D modeling a cookie stamp for our school, I am not able to flip and curve the text in the Surface Text Feature. I can only change the text direction and align it - neither of which gets me to where I need to be when stamping into…
-
Working with 3D scans
I want to scan a item, them use the scan to make parts that attach to those items but I cannot find a good tutorial that shows me how. It looks like a scan has no plane, so I have to make a plane and then model around that. How do I model around it? Youtubers just skip the details. Can anyone direct me to a video or…
-
I do not know how to produce a rendering of my idea.
-
API - export part studio?
Hello. I'm trying to create a one-click export current state of a part studio using API and extract downloaded file. So far it kind of works: it downloads zip file and extracts it, however the downloaded model is not the same as in part studio, because of the configuration (I'm using this document for my tests): how do I…
-
Export sketch as piecewise polyline.
It's been a while since I've written any featurescript. I'm looking for the following solution. I would like to be able to select N closed and open chains of sketch entities and with a provided tolerance tesselate them into N piecewise polylines and then either print them to the console or copy them to the clipboard. Is…
-
Understanding Define......or not
I cannot get my head around this define issue. @robert_scott_jr_ has tried to explain but even after following what he says, i cannot get my shapes to define. Is anyone able to give simple step by step instructions as i'm getting nowhere fast. Thank you