Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:
- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Onshape Forums
Discussion List
-
Detecting used mate connectors?
I am hoping to develop a feature that will scale a model without scaling its used mate connectors. This will allow me to preserve the size of a joint (e.g. a screw hole) while scaling the rest of the model. Is there a way to detect used mate connectors?
-
Error in closing mechanism
Hello, I have been 3d printing and 3d designing for a while now and for some reason my designs for the hinge make the 3d printed object not look closed on the other corners. Here is a image if you can see it: What are the measurements that you use for a object to close all around it with a locking mechanism since I am…
-
Frame Sketches
Hi, I'm designing some garden decking using aluminium joists. I've used frames for the subframe, making use of the cut list feature. I need to add some down turns to support the fascia boards. I'd like to use frames for these but I can't see an easy way to generate them without setting up a lot of additional sketch planes.…
-
Creating a custom function to be used in the editor
I'm trying to create a custom function in a featurescript, that will be available to the user after using that featurescript. I know you can use setVariable to define the function, but I want to add the type hints such as in functions like sin (it apperas at sin(x)), since the function currently takes 4 parameters which…
-
Não abre desenho já realizado
Pessoal boa noite Poderiam me ajudar por favor? Não estou conseguindo abrir meus desenhos já realizados anteriormente, e que já imprimi os mesmos antes. Entro em um desenho já finalizado, na aba de "Parte 1 Desenho 1", e está em branco, e não consigo fazer a impressão?
- Terminei meu desenho 3d, gostaria de imprimir com as vista em 2d, mas aparece uma tela branca
-
Undefined sketch seems to not be working
A simple sketch set up using the center point rectangle is showing as undefined. Both sides are have dimensions set as length = 100.0 and height = 60.0. The image attached shows all the constraints. This has been happening on more complex sketches and I can't figure out why. I have re-booted my computer and cleared Chrome…
-
Insert Photo to Trace
Does On-Shape have a feature to insert a photo on the sketch plane, scale to actual size, so that it can be traced to create unusual shapes of existing objects?
-
Point Pattern, set orientation for each?
I'm using @cody_armstrong 's Point Pattern FS quite a bit. Very nice!! Some of my patterns would benefit from being able to set the orientation of each thing patterned and I would like to add that functionality to a copy of "Point Pattern". Something simple and click-able like the "reorient" like when placing Mate…
-
BSPP and BSPT Threads
Continuing to bring to light the need for additional thread capabilities. Can we please get standard thread sizes added to Onshape? BSPP and BSPT among other would be great and something i wouldn't think would be hard to add to the hole wizard. -Will
-
What does everyone use Composite Parts for?
I feel like I'm missing something here, but basically every time I use composite parts they let me down. What I wanted and expected was that it would let me treat a group of bodies as a single part/body, even if they were disjoint. Instead it seems more like a way to make an assembly with group mates from within a part…
- No option to delete part studio which has my name marked on it
-
How do I solve this inverse kinematics issue
I have 2 rotatable arms, and when I try to mate them with a revolute, onshape can't solve the assembly and caues other mates to break: Once mated: Is there a way I can get the assembly to solve with inverse kinematics?…
-
Using a derived composite part in a part studio NOT assembly
I have search for an answer to this question but the answers all discuss assemblies NOT parts. I have a PCBA with 300 parts. In it's part studio I create a closed composite part so that it is one part. In another part studio I try to use this composite part ad derived. However when I select the composite part studio it…
-
How can I make this panel match this curvature?
https://cad.onshape.com/documents/c2d08122b7071e78ddef2ecc/w/c85ee399eb656c77a356c89b/e/6099882c0de00cccbf126294?renderMode=0&uiState=6854bf46da6bb33b3c0baa01
-
Loft to get a cylinder with hole (a hose)
Why can't I seem to loft between these faces? The project: https://cad.onshape.com/documents/c6282b37bc2c57450d81c93f/w/d55aba687ead91b93b3f1925/e/85c614acc7d029ff4a4ea69b
-
Customizability in Keyboard Shortcuts - Changing "Onshape Controlled" Shortcuts?
Hello Onshape Users and Team, I'm coming back to Onshape after using a different CAD software for a handful of years, and have gotten used to a system or set of controls for navigating the environment. While I do have the ability to keybind most functions, many fundamental controls are "Onshape Controlled" and cannot be…
-
Automating Wiring Definitions
Hi, I'm working with somebody on automating wiring definitions, building on the https://www.onshape.com/en/resource-center/tech-tips/tech-tip-how-to-use-custom-features-for-wiring-in-onshape feature using a combination of featurescript and the REST API. A simple example document is here…
-
How Do I Make A 3D Wolf
How Do I Make A 3D Wolf
-
How to apply a fillet on the curved surface?
hi, i have no cad training and are only self taught and relativly new to onshape. Trying to create a fillet here is not possible, what would be the best solution? i see the surface is weird, probably because i used a mesh to hollow out a block and then shelling it. link:…
-
Which constraints to use for changing a sketch radius in a sweep with out changing other points?
I have a sweep I've made using sketches on multiple planes, I need to change a radius in sketch2 that I'm using in my sweep from 2.25" to 9". I've tried constraining the sketches in various ways to keep the circled points locked, the lines vertical and horizontal, while only changing the radius and shortening the lines the…
-
Scaling a model using configuration tables and variables
Hi, I know it's possible to use transform with the scale option to scale a complete model but that doesn't allow features to be modified based on scale. My use case is designing RC model planes and I'd like to scale the complete model. It would be nice for example to have a configuration list of model scales, say 1/6, 1/5,…
-
Mates
I have an actuator with a sliding cylinder that I am assembling to a pivot arm. When I use revolute mate at the end of the ram attachment to pivot arm and hit the checkmark I get get 11 errors on previous revolute mates (which previously worked properly) and one sliding mate, and the error says mate overdefines assembly.…
-
New version of Onshape mobile application does not start on my Android 6 & Android 7 phones.
What's wrong?
-
Made my model parametric, but missed the blueprints I started from
Hello, I am making my model from blueprints and I drew my initial sketches over them, and from then i used parameters, but I do not know how to be able to scale the initial sketch with copied curves.…
-
threadCreator not working properly
In document https://cad.onshape.com/documents/eae77ff6b709a687402eeb0a/w/9d61b97522d17e0164e626c4/e/b94b7c1f4fd442b1e027261e I created a bolt and nut to test the threadCreator. The bold is made by a rouind ax, 30mm. I then created thread ANSI ACME, 4mm pitch, full threaded, start 45 degr by means of the threadCreator tool.…
-
how to draw this in onshape
https://cad.onshape.com/documents/726c9bc929f57653d3809e05/w/d67619bf5a4888a95b0b3f67/e/47775a4db59a92b4d33b6a35?renderMode=0&uiState=68501f65549385588da4cc09
-
Open Drawing from Part Studio
Is there a way to switch to a parts drawing from the part studio? In SW when you create a drawing you can right click and "Open Drawing" but all I can find in OS is "Create Drawing." It's a pain to go looking for a parts drawing when you have 50 of them in a folder. You can switch to the part studio from the drawing but…
-
Francis turbine spiral casing
Hey guys, i'm trying here to model a spiral/scroll casing and i don't know how to model the intake and the connection between the start and the end of the spiral. Getting the initial spiral is easy. I created two profiles and used the loft tool with a circle (also experimented with a helix) as path: But I don't understand…
-
Controlling my Neptune 3 pro with a Raspberry pi w zero
So I am thinking about buying a Raspberry pi W zero to control my neptune 3 pro 3d printer. However, I don't know what cable to connect the raspberry pi to a USB-B port in my printer. How would I do this and what would I need to buy?
Categories
Popular Tags
- featurescript 890
- drawings 614
- assembly 444
- sketch 429
- assemblies 379
- improvements 358
- help 331
- part studio 322
- configurations 307
- feature script 301
- Sheet Metal 296
- drawing 254
- how to 250
- feature request 242
- mate connectors 235
- loft 216
- export 209
- api 200
- dimensions 199
- extrude 196
- sketching 195
- voting 187
- variables 180
- improvement requests 174
- mates 162