Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:
- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Onshape Forums
Discussion List
-
Sketch can't actually obey "coincident" constraint
So, here's what I did: created a sketch with a spline approximated that spline using Edit Curve to simplify it converted the resulting 3d curve back into 2d by "Use"-ing it in another sketch used "Offset" on the resulting sketch curve added various lines which intersect with the offset curve What I'm observing is that…
-
Make extrude removal stop before walls get too thin while maintaining a consistent cross section
Hello all, I am trying to make a leeboard hydrofoil model on this document: https://cad.onshape.com/documents/40a09d2b7dbc0e96f864de60/w/9b820e6caf97b342e0b34d33/e/e4addd4030400b4f4e982b63?renderMode=0&uiState=687bf140abce191eed0df80b This will be 3D printed with carbon fibre spars inside it, and I have been struggling to…
- ISEETHATTHEDIFFERENCEOFTHEDIAMTERSOFTHESECIRCLESIS2.8 MM.BUTTHEDISTANBETWECIRCLES'EXTREMITIES ISNOT
-
Feature scripts
Hello everyone, I was hoping someone can give me guidance on how to create a fully customized table , for mass properties, withe specific density for each material. Its basicallyto show the current, mass if i were to assign the material, ive been strugglingthe whole day but cant for the love of me figure this out , any…
-
Demonstration: Enhanced Debugger FeatureScript
Yes! The debugger can actually be smooth to use. And with this little trick, you can surgically Debug! Essentially this involves incorporating the → 'arrow' syntax, and a standard use of Lambdas to bypass the ever abundant "context". Some other functions for println, and colored Debug are also included.…
-
Featurescript Dev Paid Contract: BOM Auto-Kitting Featurescript
I don't know if this is the right place to post this, so feel free to take it down if it isn't! I'd like to hire someone to write a custom feature script that will automatically take an assembly and create a 3d-printable "tray" with bins labeled with each parts part number and revision, where the bins are large enough to…
-
Assistance with multiplane sweep
Hi I have been working on this document for awhile, and i am kind of stuck on making a sweep between the balltray part to the right and the cone to the left, i want to have a rail in with the same face going from the cone to the balltray, it should have an angle and i want it keep the face of the rail in his original…
-
Sheet metal
Im trying to creat a sheet metal mold for a concrete slab, the slab has rounded edges along the outside. I want to make a 4 piece mold that connect at 45 degree angles. What is a good method to draw the curved edges of the mold so that i can use the sheet metal tool to get the flattened dimensions? As you can see the way i…
-
Wrap a sketch (or extrusion) around a cylinder
Hi I want to wrap a hex grid around a cylinder. What's the easiest way to approach this please? Cheers
-
New Custom Feature: Segmented Pipe
A Featurescript to create a one or more pipes (cylinder or hollow tubes) between two locations (point, MC, arc, circle). The pipe can be split into segments with a remainder piece representing a cut section. Various options are available during creation. I created this to help with HVAC ductwork. Let me know if you have…
-
Approximate Face (New Custom Feature!) 🆕
. CADSharp has sponsored a new custom feature: . Approximate Face This feature uses Onshape's new constrained surface functionality to re-create an approximation of multiple faces. Useful when working with features like Texture or Attractor Pattern that only allow one input face. CADSharp Feature Library . ⚠️ Need custom…
-
Creating a hole on the top face of a sweep
I'm new to 3D design, an onshape therefore as well. I have a design I'm trying to make: https://cad.onshape.com/documents/4f3068fc37cd404e496b5d65/w/bb2460c448ccdfc772293d47/e/0a043b966426950f70e23de1Error If you look at the bottom, there are two drilled holes extending into the part, based on two vertexes of a line…
-
How do we find useful feature scripts?
@Jake_Rosenfeld posted a very helpful article about adding FS at the end of this discussion Jake or others - I have seen this question on forum before but I do not remember a good answer. I know FS is not intended long-term solutions to generally required functions. However, for now there is a lot of good stuff which we…
-
Fill a hollow object
Hello. I have an object with a hole inside. I want to make it solid, how can I fill hidden holes?
-
How to show Custom document property in drawing
Hi to all, I'm teacher at a university. We form groups of 4-5 students so that they create a proyect in onshape. For administrative reasons i thought it is a good idea, create a custom property in the document category with contains the numer of each group. This number I want to call automaticaly in the drawing template I…
-
Can I use Mate Connector code in my FS to reference context objects?
I want to be able to use an MC to define a starting point on Context objects. It seems like the only script that can do this is Mate Connector itself. I copied the code into my FS and it works, but only if I don't change the name of the annotation for the query. Anything other than definition.originQuery throws errors…
-
How Do I Keep This From Happening?
Whenever I am editing my cad model, from time to time, Onshape Deletes a certain part of my model, sometimes when i just load into onshape it does this. i do not know why, when i go back to previous versions it continues that part being missing and the rest of my wing being hallowed out.
-
Failed Thicken from Loft Surface
I am trying to create a spoon-like shape with a thickened loft surfaces however no matter what I try I cannot get the thicken to generate. I don't think there are any sharp corners or self intersecting surfaces but I can't work it out.…
-
How to make documents private
How can I make documents private so no one can see them or access them when using the free subscription model?
-
How to correct this notice: "sketch is not fully defined"?
unable to extrude on the original two dimention sketch
-
Not sure what I'm doing wrong - print in place box w hinged lid
Rank beginner here and while I've done many tutorials trying to get the hang of things, I'm not sure what I'm doing wrong with my attempt at a design that is intended to be "print-in-place" Here is my design:…
-
How to restore to "Start" ?
Hi, In the Version History, when I've selected the "Start" version, I don't see/find the restore button. If I select another point in the history, the "Restore to Main" button is there, no problem. There must be something I am missing, but what?
-
How do you get onshape to launch into the mobile app instead of the the browser?
I got a new phone and had to reset my password. When I did reset, Onshape automatically launches into the browser and doesn't allow me to see the password. The app is obviously far better for use on mobile. Am I missing something simple here?
-
Performing a search query through the API
When I do this, I have been able to get this end point to work. https://cad.onshape.com/api/v5/documents?nodeId=1&q=_all:P0803&resourceType=filter This seems to search through all of onshape and not just in my company or "my onshape". Also, I cannot seem to get any other q parameters to work. I try using state, or when and…
-
API and Inspection Tables - Quality Control
Has anyone used API to export Inspection Tables to integrate on a secondary software (Dynamics per example) so that the production floor can make the measeurements and verifications required directly in Dynamics? Basically the ideia is to use the Inspection Table as input to Microsoft Dynamics to create the parametrization…
-
Constrain to a variable and “no less than” Constraints
I have a laser cutting pattern that I’m converting to be FDM printable. The pattern has notches than need to be the same depth as the eventual extruded thickness. What’s the best way to do this? Is there a way to constrain a wide in a sketch to an eventual thickness? Or can I create a variable and constrain the notch…
-
How Do I Make A Wolf In Onshape
How Do I Make A Wolf In Onshape, I need help
-
How do I continue the Certification Test?
My computer lost power in the middle of the certification test. When I relogged with 1.5 hours left on the clock, the only option to continue the test was to repurchase it. I lost 2 hours going through the test not to be able to complete it.
-
Custom BOM
I have a wood working project that uses strips of wood. The vendor sells this strip in lengths of 2500mm. I want my BOM to do some math dynamically and output the quantity that vendor sells so I have a purchase list at the end. For example : calculate quantity that vendor sells by taking part length in Y direction and…
-
How can I determine the entity or geometry type of a selected entity?
Do I need to have a qGeometry for every possible type, or is there a way for it to just look at a query and tell me what it is?
Categories
Popular Tags
- featurescript 890
- drawings 614
- assembly 444
- sketch 429
- assemblies 379
- improvements 358
- help 331
- part studio 322
- configurations 307
- feature script 301
- Sheet Metal 296
- drawing 254
- how to 250
- feature request 242
- mate connectors 235
- loft 216
- export 209
- api 200
- dimensions 199
- extrude 196
- sketching 195
- voting 187
- variables 180
- improvement requests 174
- mates 162