Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:
- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Onshape Forums
Discussion List
-
How to dissociate mirrored parts
Hello, I am new to Onshape, coming from the Sketchup world. I have a Part 2 which results from the mirroring of a Part 1. Now I need to modify Part 1 without changing Part 2. Is there a way to separate or dissociate the two parts ? Or is there a smart way to do it ? Thanks in advance.
-
New Custom Feature: Publish Geometry
Directly inspired (copied) from @GregBrown's great Top Down video, I wrote my own version of Publish Geometry, which allows you to make Composite Parts that can include Bodies, Faces, Sketch regions, Curves, and Mate Connectors. One Derive can bring in all of this stuff as a single Composite Part to use as reference…
-
Error FEM-Simulation "Worker does not exist." "internal Error"
Hello folks, I am doing a simple fem simulation of a shaft that is loaded on both sides with a force and a torsional moment. When I check the "show results" box, I get alternating error messages "Worker does not exist." and "An internal error has occurred at this time. We appreciate your patience and encourage you to…
-
Copy/Paste in new tab of existing Part Studio
HelIo, I am working on a simple project with four parts in my Part studio; how do you paste the copy of the part studio you are working in into a new tab ? Also, after you copy one of the parts in your Part studio how do duplicate (paste) it into your Part studio (workspace)? Appreciate your feedback. A. Gray
-
Is Onshape web down?
I'm got an internal error during an extrude and now I'm unable to open the document via the web. I have a buddy that can access via the phone app.
-
Linking Objects
How would i go about linking these two together using a tube? For example, point A to point B.
-
How do I insert a Part Studio from history
So I deleted a part studio by mistake. Went on to make other changes. Now I want to add back the deleted part studio from history (but don't want to throw away recent changes to document overall). Is there a way to do that?
-
Any way to translate an exploded view?
Hi, I'm looking for a way to translate exploded views and their individual steps to multiple gLTF files. The real goal is to be able to use the standard web interface to create parts and assemblies. Then create exploded views of the assemblies. In our own webapp we would then use the API to update the parts by updating the…
-
mates showing in part studio not present when in assembly
https://cad.onshape.com/documents/31d9f3436d1f6286f056967a/v/c7ea79f0a01fbb55a00bce3f/e/fd67035c9e5e62f496ede719 I am exploring and learning about both derive and featurescript here. In each of the part studios base_unit and insert_unit I create a mate connector. I use my featurescript with an instantiator to create a…
-
Split Question
Hello, I'm rather new to this world. I became interested in learning how to use something like OnShape because of an interest in 3D printing and making printed "props" for Christmas lights. These props can be quite large and need to be printed in "pieces" to fit on a printer bed. The idea is to creat a basic shape ("star",…
-
How do I resolve these lose ends?
https://cad.onshape.com/documents/68cd618660204de023062fe4/w/dc8b89a534cca97270025d0f/e/fc08be3b81ad96b928b49fed I'm trying to complete 3D Curves / Exercise: Handle. The Right Side Guides sketch won't resolve due to lose ends. I can't figure out how to resolve it. Any help would be appreciated.
-
having trouble with setting configurations for `addInstance()`
var instance = addInstance( instantiator, baseUnitStudio::build, { "configuration" : { "is_left" : false }, "transform" : transform(vector(x * definition.xd, y * definition.yd, 0 * inch)) } ); https://cad.onshape.com/documents/31d9f3436d1f6286f056967a/v/cbf25e31bb40ade74e9aa036/e/9cbee39ae72c63645cafbc53 I am attempting to…
-
Where Used Without Where Used And Part Confusion
I will start by summarizing my problem and work flow. This is a public project run by volunteer engineers so nothing is IP. I noticed we had many copies of the same screw, which is bad because it will incorrectly isolate changes made to such a common part. I opened one of these references and was shown some random…
-
OnShape issues with Linear Pattern one of the pattern objects disappears after completing the sketch
1. I have a linear pattern and it's disappearing one of the elements in the pattern for some reason when I click the green check! Screenshot below. What is causing this?
-
Student Assignments
First time using OnShape with my 8th graders. When I create an assignment, and students begin working on it, I can't figure out how to see their work. Even when a student tested this out and submitted it, I just saw a tiny thumbnail of it. How can I see their work/progress for this assignment? Thanks!
- Is it possible to make a self-intersecting sweep?Who knows what tools can be used to do such work.
-
Show part mass on drawing
Is there a simple way to display the mass of a part and/or assembly in a drawing so that it remains a live link to the part studio or assembly?
-
Transforming a sketch into straight vertical and horizontal lines for 3D printing
Hi! This is my first post here. The problem I want to solve is that if you 3d print something small, it matters where the slicer places the outer layers. When drawing a sketch, you don't know where the edges of the layers will appear. That's why I'm trying to make a new feature that allows you to copy and transform a…
-
How to fix Onshape highlighting parts + layering them up??
Hello, I am a user of Onshape Educational edition, and currently use it to design a robot for the 2024-2025 FTC challenge. Recently, I've been running into some issues where Onshape, when rotating, zooming in/out, panning, or dragging, would highlight around the parts it thinks the mouse is on, and layer them up like…
-
Set Color and Material - New FeatureScript
Hello everyone, I would like to share a featureScript of mine which I think could be useful for you. https://cad.onshape.com/documents/a1c694da929cd0c00da57f1d/w/affc3a805df9b0c08ec7af3c/e/641eb1448fe7d5609b74ae7e You can make a copy of this document and customize the table with the materials you use for your parts. The…
-
Student SSO Login Issue
We have an Education Enterprise account with Google SSO. I have two students who, when logging in, get looped back to the login page, despite the fact that they are logged in to their Google accounts. Anyone had this issue or know a solution?
-
Student SSO Login Issue
We have an Education Enterprise account with Google SSO. I have two students who, when logging in, get looped back to the login page, despite the fact that they are logged in to their Google accounts. Anyone had this issue or know a solution?
-
center path finder feature
Hi I have a problem with my script. I wrote a script that finds and adds the center path of a given body. So its the center between two given edge paths on the body as well. However I encountered an error and it didn't work, would appreciate any help! thanks. The blue body was created using a wiring feature. Wiring…
-
Why is the circular edge being used in my sketch as a defined shape?
I am trying to create a flange on the bottom of a revolved part but one of the faces (bottom) includes the circular edge while the top does not. In this part, one of the extrusions fail because the surface does not intersect with the rest of the part. What am I doing wrong?…
-
how do i make two angles on a cylinder
i want to know how to make…
-
WTF happened ?????? We have to pay now??
I logged in to continue working on a file for a client and none of my drawings are editable anymore., They are all "READ ONLY". Is onshapoe not free anymore? I cant afford to spend 1500.
-
copy assignments?
Is there a way to copy assignments from one class to another?
-
What's the best way to fix this imported STL?
Here is a screen shot of the STL I imported, its hollow and i need it filled in solid, any ideas??? Thank you in advance!
-
Appearance
Hello Is there a keyboard command in Onshape to set the appearance of a part to transparency 50% and back? Is there another quick way? Thank you for your answer(s) Hansjürg
- Where can I find the "homework" from the first session of onshape bootcamp?
Categories
Popular Tags
- featurescript 890
- drawings 614
- assembly 444
- sketch 429
- assemblies 379
- improvements 358
- help 331
- part studio 322
- configurations 307
- feature script 301
- Sheet Metal 296
- drawing 254
- how to 250
- feature request 242
- mate connectors 235
- loft 216
- export 209
- api 200
- dimensions 199
- extrude 196
- sketching 195
- voting 187
- variables 180
- improvement requests 174
- mates 162