-
Missing holes when printing the exported stl file?
Hi, novice here but getting there.. I design a simple pulley.. couple of circles with extrudes, centre and a hole.. also an imbedded washer extrude.. Part looks perfect in Onshape, exported stl good.. looks perfect on the printer preview.. But when I print it, it's a fully formed result, minus the hole and the washer…
-
[API] Retrieving nested sub-assembly mate values in context of parent assembly?
Hi everyone, I am working on a custom URDF exporter and I am trying to retrieve the current mate values for a full assembly hierarchy. The ProblemI am currently testing the Assembly: getMateValues endpoint. While this successfully returns mates for the top-level assembly, it excludes mates located within sub-assemblies.…
-
Fillelt works on one part of the model, but doesnt in its exact copy but mirrored.
Hi, im making an fpv frame but i cant forf some reason fillet this. I filleted the other side with the same settings just fine. Even tried to turn off other fillets. Please help.
-
Looking for person to help with drawing
I am looking for help with a project – person to use Onshape I have the design and made sketch Looking to go over project and get pricing, I will use this to print on my Bambu H2S printer Please call any time – I an on Eastern time zone (Florida) Dale Hoppas 772 812 2000 dale.hoppas@comcast .net
-
How can I fix this tangent intersection and fill it?
I've been having problems with this when using face blends and went to try to loft it but I'm not sure how to fill the blue surface to make a solid. I'm not familiar with surfaces at all and help would be very appreciated.
-
How to use ThreadCreator?
I had a hard time creating my first internal threads with ThreadCreator and searched high and low for instructions. Lots of vidoes about how to install TH, but very little about how to use it for internal threads. And what I did find didn't cover some key points. Please chime in with advice. To create internal threads,…
-
Publishing Documents with Copy Permissions but Without Version History
I'm looking to publish a set of documents so that anyone can copy them (to be able investigate how things were done, make tweaks, etc. as they want) and have access to the latest version, but while keeping the version history (specifically the contributor names) private. Are there any tricks or other methods anyone knows…
-
Design Review Request: What can I do better?
I have been using OnShape as a hobbyist, mostly for 3D printing, for just over a year now and I'm getting more comfortable with what it can do. I'm happy with the outcome of my latest item, but I'd really appreciate a review of how I've gone about it and suggestions for what I could do better. I have some specific…
-
Why is the Border Frame thickness not changing all of the border frame?
As you can see, the line selected has been moved to the Border frame layer, but the thickness of this line has not changed.
-
how to add or subtract a seperate step file out or onto a part
my exact situation is I made a multiboard panel for my workbench and ive been designing my own organizers to mount onto it. I cant figure out how to get an imported step file into the part studio im working in. and then i also need to either add or subtract that imported geometry to or from the part I already made. can…
-
Failed to extrude, check input for two identical parts and extrudes
Here is a link to my document: https://cad.onshape.com/documents/b0d4b50641134a7bdb3b434f/w/acec1f7448d550d9c57c8e07/e/d518e41c58a4313287b65722?renderMode=0&uiState=694858e7dcbd655c37d5a848 I was trying to make a paint brush stand. As you seen in the file, sketch 5 splits the top surface in to two parts. Although they are…
-
Unexpected behavior Advanced Configuration Workflows / Exercise: Configuring Multi-part Part Studios
Specifically at Step 11 the student is instructed to: Double check the Feature list. There is one more feature that is red, the Base Fillets. Switch the configuration to the Square Base. Double check the Feature list, again. All the features should build without errors in this configuration. This not the case. When…
-
How to get changes to sheet format to apply across the whole doument?
I have a large technical drawings pack in onshape and I have realised there is a mistake in the titleblock. Is there a way to edit the title block and have it apply over the whole document similar to 'edit sheet format' in Solidworks, rather than having to edit each sheet individually? In my opinion, elements on the title…
-
.URDF export improvements
Hello OnShape, Love the product! Are there any plans on improving .urdf export for robotic purposes. urdf is a robotic format that represents a robot in simulations. I'm only able to find https://github.com/Rhoban/onshape-to-robot This is good but there are a lot more to be desired. Keep up the great work with OnShape 💯
-
Sketch "Use tool" (project geometry) cannot serve as an anchor
Hi, I come from Fusion 360, where I got in the habit of using the "project geometry onto sketch" feature. I figured I could do the same in OnShape, but it doesn't appear that "Use" is meant for the same thing. Here are the problems i'm encountering when I use the "use" feature in OnShape: the projected geometry is…
-
Chain with revolute mate connections
I am trying to simulate a chain and a carrier that rotates, I have 50 links (simple design) with revolute mates and I cannot get the links to move effectively. Each link has a limit of zero to 10 degrees. I have optimized my RAM and virtual RAM and still having no success. Any suggestions as to getting this to work? Thanks
-
Helmet exercise, from Complex surface features lesson, Step 7: Fill 3
I have already started this lesson from scratch 3 times after encountering problems with previous steps, so I am certain that I have followed the instructions to a T. Here on STEP 7 is where I am having difficulty. After selecting the four edges, the Fill gives me the error "Could not meet tangency constraints at…
-
Changing/ setting the dimensions
how , on android, change or set the dimensions of the lines, diameter of the circle. I can drown it but I can't, don't know how to set it to desire dimensions.
-
Hello everyone, I am trying to create a feature script that let me select a plane and put a sketch
Hello everyone, I am trying to create a feature script that let me select a plane and put this sketch. This is what I have so far but it still creates an error. FeatureScript 2815; import(path : "onshape/std/geometry.fs", version : "2815.0"); annotation { "Feature Type Name" : "Rail Profile" } export const railProfile =…
-
Soporte para diseño
Hola, hace tiempo que utilizo onshape para diseñar piezas de mis aeromodelos. Estoy construyendo una maqueta a escala 1:8 del Grumman Duck, avión emblemático de la 2a Guerra Mundial. Tengo dificultades serias para poder completar el diseño de los flotadores del avión. Adjunto imágenes del plano y del aspecto real de los…
-
Stuck with how to approach offset part - Connect two
Hello! I hope you all are doing well! I really hate to ask this, but I've run into a snag. Reviewed some tutorials on loft, revolve, bridging curve + fill + enclose. But i cannot get anything to work. I've tried various sketches to no avail. Below is a snapshot of the part i am working on, and a photo of the actual part i…
-
Is there a way to print a pdf that's been inserted into a Publication?
There doesn't seem to be a means to print a pdf or .dwg directly from a Publication. I see the pdf can potentially be downloaded, but printing directly would be a better option for our workflow.
-
Dual Dimensions in part studio and measure tool?
As far as I can tell there is no option for dual dimensions in the part studio sketches or within the measure tool. While searching for this function I found a forum post stating that onshape is working on it, and even a improvement request that was marked complete in 2021. However I cannot find dual dimensions in anything…
-
download public model
I would like to use the API to download public models from Onshape for research purposes. What is the proper procedure for doing this, and whom should I contact to ensure that I can access and download the data legally and without issues?
-
Drawing regeneration VERY slow
I have recently started using drawings. I have an onshape document here: https://cad.onshape.com/documents/52b43aa7ca78e0e6e8b32d05/w/9da63303efc05ac40df0bcbc/e/aee36a63247c0356c10ec6f6 (ignore naming, ect — it's kind of a "scratch" drawing). It's simple, not very many elements or tabs. If I change a dimension (I'm working…
-
Failure of a feature to regenerate after re-login?
I completed some work some time earlier, and everything was fine and smooth. But a few hours later, when I logged in again, a feature (a replace face in my case, which also triggered the following failures) failed to regenerate. What might have caused this? And the spooky thing is, after I restored it to where I had left,…
-
CAM Studio: "Cannot simulate because previous tool path operation has no stock"
What does this message mean? How can I fix the job so the error does not happen?
-
Adding metadata to custom profiles for the FRAME feature
I'm trying to produce a custom frame library for our company. I've managed to get most of the functionality to work, except the metadata displaying on the cut list. Here is what I have done so far: Created a folder for company profiles and got the sharing permissions sorted. Updated the folder so that it is now a company…
-
CAM Studio Post Processor support for Tormach 24R Router
Is post processor support for a Tormach 24R Router on the roadmap?
-
Filet that worked before is now failing
I filed this shape just fine. But when I try to do it again in a second model, it is failing, and it is not obvious to me why. Any tips on what I need to look at?