Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:
- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Onshape Forums
Discussion List
-
Duplicate Assembly instance or Sketch "in place"
Hello, I like to have each design iteration of a part that got prototyped visible in the assembly. That way I have let's say 4 versions of it and I can hide/show to compare any 2, any 3, or all of them at once in a very simple way. AFAIK this cannot be doen with Version Compare. The way I do this in Onshape is whenever I'm…
-
Adding modifier to dimensions
I'm not a super experienced Onshape user, but I'm looking into its ISO GPS capabilities when it comes to drawings (in particular ISO 14405-1:2025). The geometric tolerances and datums seem to be very well implemented, but I'm struggling with adding modifiers to dimensions of features of size, such as envelope, GX, GN, LP,…
-
Having the legend "question" above the box where you want a title is .... not good.
How do I construct a plane at 45° to the axis of a cylinder? I managed to create a radial plane half way up the cylinder, but cannot find a means to tilt it to 45°.
-
Finding all Featurescript tabs with a changed linked document
Hi all, I have a document with several Featurescript tabs which all import a given shared document. Is there a way to identify all tabs which need import version updates and ideally update them all simultaneously? If that's not possible is it good practice to have a separate single Featrescript which imports shared…
-
How do I blend the two inside faces too each other? I can't seem to get face blend to work. Plz Help
https://cad.onshape.com/documents/c5684b823c04af1ec354a756/w/4360f2a9b3dae329827ae9f2/e/e1df25300d4c I want to blend a face between the outer perimeter of the center piece to the inner perimeter of the outer piece and can't seem to setup a face blend. Am I doing it wrong? is there a better function to use? any help would…
-
how to create a drawing which is the same dimensions as the sketch
hi im new to this and struggling to create a drawing the same dimensions as the scetch i have done. For example on the sketch, the dimensions of one line is 682.786mm, when converted to a drawing that same line is changed to 26.881mm. so when i convert the part to dxf file to be laser cut it is no where near the size it…
-
New Feature: Sketch Point Mate Connector
Hi all, I'll be the first to admit that I am a mechanical engineer, not a software developer so this may not be written in the best way. I find myself often needing a way to add a bunch of mate connectors to various, non-uniformly spaced points on a body (usually an in-context sketch to back-drive some mate positions) and…
-
Surfaces Won't Turn Solid
Hi, I am relatively inexperienced with working with surfaces in Onshape, and have ran into problems when trying to make them solid parts. I am designing a logo that uses hundreds of surface lofts to enclose the top and bottom plates, but the enclose tool doesn't work for me and I run into issues in many of the surfaces…
-
Improvements to Onshape - May 15, 2026
This release introduces new user interface enhancements and workflows across the board to help make your daily work more efficient, plus an illuminating new explicit Light experience for Render Studio Advanced users.CAD MATE CONNECTORS REFERENCING A MATE CONNECTOR Onshape has introduced the ability for Mate Connectors to…
-
Is this a BUG or a weird unexpected operation [Hollow walls after SPLITting]
Using Split after Hollowing a box creates hollow, not solid walls I created a cubic box. Then hollowed it leaving 3mm walls. I then split the box to create a box and a lid. I later noticed via the Sections view that the box wall is NOT solid but has hollow space in it. Through investigation, I see that it is the SPLIT…
-
Maintaining a stable body id when copying flat pattern body into standard part studio edit space
I have a feature that contains an option which allows the user to copy the flat pattern of a sheet metal part into the standard part studio editing space. The problem I have been having is, any time the part studio is edited and a new feature is added or removed which interacts with the parent sheet metal body, the flat…
-
Assembly Workflow Tips
Building a custom computer case and want to design around components that I've modeled and linked up in an assembly. Tried to derive the assembly into the chassis part studio, but only saw other part studios in the derived tool. What am I missing? Any tips on the proper workflow for building around real-life components…
-
New Feature: Braided Curve
Hey all! Wanted to model some braided wires for fun, and couldn't find a custom feature to generate the braid paths. Slapped one together real quick, snag it here: https://cad.onshape.com/documents/e522ae0e05eda848c8b5a692 Eventually I'll add options for more than 3 strands (right now the logic is all kinda hard-coded for…
-
Creality fails to print any Onshape generated STLs
I have a Creality CR M4 that I used to print lots of downloaded STLs. when i have tried to send an STL created in Onshape using Creality Print to print, then files slices but when sent to printer it fails to print. i have tried all the internet search /ai fixes such as send as 3mf, model fix model, check unit miss match…
-
I am doing the tutorial where you use loft to create a funnel and can't get sketch 2 to work
When I create the offset of 0.05" for the ellipse on the lower surface plane of the rim and handle (step 4), I get a gray ellipse offset as expected inside of the rim, but with gray (nothing) filling the space between the rim and new ellipse. In the tutorial illustration, however the space between that ellipse is blue,…
-
Performance issues when handling large amount of parts
https://cad.onshape.com/documents/39b5318dff1be43e6b28688c/w/7665ddfd2e00dde38de738a7/e/9752af13feab39cb04c875f8 Hi Onshape community, I have created a parametric design sheet to generate plans for segmented wood turning. Now the issue I'm having is that above around 10.000 generated parts, Onshape becomes rather hard to…
-
Can more than 1 import be put into the same part studio? If so, how is this done?
Can more than 1 import be put into the same part studio? If so, how is this done?
-
Move a sketch to a new plane
I have a design where my sketch is on the wrong face of the extruded solid. Because it's on the wrong side, the holes are going the wrong way. It seems like the thing to do is to create a plane on the face where I want my sketch, then move the sketch to that plane, then recreate my screw holes. However, when I go to change…
-
Gear Lab - Cylindrical, Bevel, Face Gears
Yup, it's another custom feature for gears. I had previously used Neil Cooke's excellent 'Spur Gear' feature [Link], but I wanted the ability to generate bevel and face gears as well. I only learned about Bob Tipton's great bevel gear FS after I had nearly finished this. I fear that my "Gear Lab" custom feature is largely…
-
opSplitFailing for some reason
Hello, I cannot figure out this error. It is a relatively simple bit of code. I can see that the bodies variable is a valid body (using debug entities) Additionally, I can split using the planes created using opPlane. The error is: @opSplitPart : SPLIT_SELECT_TARGETS Code: FeatureScript 2960; import(path :…
-
Onshape Public Library
I cannot seem to find the Public Library option inside my Onshape Account. Why would that be?
-
Custom Feature: Bubble Trouble – A Sub‑D‑Style Blob
Link the the Bubbleverse: Custom Feature: Bubble Trouble I always wanted one, and now I have one. A bubble to modify! What does it do? It adjusts a freeform shape in all dimensions using 6 triads and an optional 12 manipulators to adjust the weight between those triads. You can do this manually quite easily – but having…
-
how to disable the measure tool in a shared document with view only access
We want to share our CAD data with customers so that they can see the model and explore the tree to get part numbers etc for ordering of spare parts but we do not want them to be able to use the measure tool. Is it possible to disable this tool?
-
exporta pdf del dibujo
quiero exporta un dibujo em pdf pero este me sale sin colores y no encuentro como hacerlo , dicen que hay quie activar las sombras pero no encuentro donde
-
please help! tryin to to lightening and no matter what I do it wont work
the hexagon diameter is 1.5 and spaced for a patter. the thickness of the part I'm trying to lighten is 0.25. I've tried changing the size of the hexagons as well as changing the thickness of the walls, ribs, and tool Diameter.
-
wanted a step by step guide in completing the photo
I can't seem to get the gap right
-
"Simple" Beginner Loft Question -- Why is it twisted?
I've created a simple OnShape document. It's a cylinder. A few millimeters above the cylinder is an offset plane. Drawn on that offset plane is a rectangle. The rectangle is extruded 25mm. What we end up with is a box floating above the cylinder. Now… I want to make a Loft that joins the bottom of the box to the top of the…
-
Featurescript UI Question
Hello everyone. This is my first featurescript. I am attempting to expand on @jeff_brown304 's Camel project, by making an improved CAM drill tool. The intent is to have the user select a cylindrical hole surface, and subsequently unhide portions of the UI that correspond to different features that the hole may have. For…
-
BOM columns: Possible to add XYZ-Dimension of a part?
When preparing production, I usually get asked how much material will approximately be needed. In my old CAD system, I had the opportunity to add a column to the BOM to display the XYZ-Dimensions of every part which, even if not 100% accurate for irregularily shaped parts, helped a lot with the estimation. The shop could…
-
My feature won't load and says there was an error regenerating
I was trying out the feature studio, and my code works perfectly fine, but then I when I try and load up my custom feature it says there was an error regenerating, what do I do to get it to load?? https://cad.onshape.com/documents/b86513c55847017bbd54002a/w/6650427da28070e17e984649/e/d48f3a861da82863e1cfbacb
Categories
Popular Tags
- featurescript 890
- drawings 614
- assembly 444
- sketch 429
- assemblies 379
- improvements 358
- help 331
- part studio 322
- configurations 307
- feature script 301
- Sheet Metal 296
- drawing 254
- how to 250
- feature request 242
- mate connectors 235
- loft 216
- export 209
- api 200
- dimensions 199
- extrude 196
- sketching 195
- voting 187
- variables 180
- improvement requests 174
- mates 162