-
Need help: Cannot select face for Sketch Plane
: "My sketch plane is stuck in the middle of the part and I can't select the front face and I can't find the tools for selection filter." Cannot select part face for sketch plane / Hole start issue. Hi, I'm trying to create 6 holes on a circular face, but Onshape won't let me select the face for my sketch. It keeps…
-
Variables and Expressions Lesson
Good Morning, I use the variables and expressions lesson from the Learning Center https://learn.onshape.com/courses/variables-and-expressions to teach my students about the proper use of variables and expressions. Last November I had no issues with this content but today we discovered as a class that the Creating and Using…
-
how to clear bad gateway error
-
Parts in my assembly have skewed axes of movement using planar mates.
Thank you to anyone who is reading this question. I have designed a speaker cabinet that will be built using plywood, and need to layout the parts flat to make toolpaths for CNC. I have used the Auto Layout feature script for other projects, but for this project I need to manually lay out and arrange the parts on a flat…
-
paid help want to jump start a parametric sheet metal project
where or how do i get help to create a project correctly I fear i will spend days weeks doing workarounds fumbling to create. Feel better in using paid help to get the fundamentals right so i can run with it
-
How to scale a sketch parametrically?
Hi all, I am making a simple jewelry box, with the outline of a rose flower debossed into the lid. I created the sketch of the rose in Inkspape, and then imported the resulting .DXF into onshape. The sketch is very complex, lots of curves and vertices. I know that when you open a sketch, and it has no dimensions, that if…
-
Query custom tables from the API
I am consuming the API, and I am interested in knowing if there is a way to query custom tables from a Part Studio. I have the following Feature Studio that generates the custom table I want to query:
-
New FeatureScript - 4D fold (Foldin'-the-box)
Link first This feature is inspired from Hackaday post by Arya Voronova that showcase some really cool ways to make complex parts with support-less additive manufacturing. Its original intent is to target additive manufacturing, but there's likely more use cases, as @elijahpekaar pointed out. The idea for an Onshape…
-
Printable Counterbore FeatureScript
This is my first time trying out creating a FeatureScript. It's all vibe-coded but works pretty well after some tweaks. It takes ideas from https://www.baysingersadditivemanufacturing.com/design-floating-holes/ and https://blog.rahix.de/design-for-3d-printing/ for how to modify counterbore holes to better handle floating…
-
Kiri Moto which machine?
Which machine should I pick for Kirimoto in setup when I have a Precision Mathews PM30 converted to CNC using a Centroid ACORN control board running Centroid CNC12 software?
-
CAD for Robotics Competitions
Are you using our CAD for Robotics Competitions course? We'd love to know how it's going. Share tips, post pictures of your models, tell us your favorite unit, or let us know how you've expanded or extended it.
-
How on earth do you grab and move drawing geometry
I simply want to grab and move drawing geometry (related lines and circles, etc.) within a sketch. Simple stuff, but I cannot figure out at all how to do this.
-
Am I just an retard? or is feature script impossible..
So what I have been attempting to do, for the 10th time now... Is create a slot (as shown in the top left corner of the sketch) on each selected point. This is still my first "from scratch" feature script. but I can never get past the first step... creating a sketch on a plane... I've learned a dozen other languages…
-
How can i connect these two shapes?
This might be super simple but im relatively new to onshape…. I attempted to use the sweep tool and nothing would work, i was unsure what to select. i need to connect the ends of those two cylinder like shapes at the top, into like a rounded off corner.
-
How to manage my school structure
Hello! I started as the only Onshape user at my school, but we have grown quickly and now have 20 teachers using the platform! My school now needs to formalize how we handle drawing exams. We need to move exam documents to specific administrators or "organizers" who can then manage the permissions (who can view or modify…
-
How to create sketch splines without any hassle
Hello. I would like to create contour lines from photographs and design calligraphy, etc. Is there a way to create sketch splines without any hassle? please tell me. I want to do something like contour extraction in the photo app.
-
how do I get to part studio?
-
Is there a way to choose a centermost hole from my pattern?
I have a hole pattern running from the bottom to the top of a panel. The pattern is spaced depending on the panel configuration and wind loads. I need to select the centermost circle of the pattern to create a fixed hole (a hole smaller than the rest) Is there a way to choose a centermost hole, if the hole is not on center…
-
フォーラムに投稿した文を編集する
フォーラムに投稿した文を、訂正したり、編集したり、もう一度投稿前に戻って編集したいのです。 が、できるのでしょうか？ できるのなら方法を教えて下さい。 なお、日本語ではボタンの名称に誤訳が生まれやすいので、画像でやり方を説いてほしいです。 例えばフォーラムの回答済みを質問者が設定するとき、回答済みを意味するボタンに「サポート」と表示されますが、日本人には回答の終わった意味を示しません。今お手伝いを要求している意味になります。
-
フォーラムの回答により質問が解決してマークを付けたいがどのようにつけるのだろうか？
回答により質問が解決してマークを付けたいがどのようにつけるのだろうか？ 6 問題が解決したら、または質問への回答が得られたら、以下の点にご注意ください。 - - 役立つ回答には「回答済み」マークを付けてください（質問を投稿した場合）。 - 問題が解決したかどうかをお知らせください。
-
Streamlining Sheet Metal Exports in Assembly
Hi, Just a plain question here. I created a configuration Part Studio, and import many variants in one subassembly. What is the most approachable way to export all the sheet metal parts flat pattern to DWG's? We're talking about around 50-150 instances of one configuration with 2 sheet metal parts, every week. Thanks in…
-
The right way to mate
How can I make the seal part go with the piston until the stopper (due to pressure in the cylinder)? Right now if I pull the piston it does not pull the seal with it. What is the right mate to achieve this? https://cad.onshape.com/documents/90fc1ba431fcd4e983d51aed/w/3f289c9f5ee5cdba5a2536f0/e/6c4c72e984e3c7781efe5a7e…
-
日本語のヘルプを別な方法で示してほしい。
今のヘルプの内容にはボタンが持つ機能の説明がある。 ところが私の欲しいヘルプは機能の説明ではなく、私の求めるデザインを実現する手順である。 だから、やりたい作業を日本語の単語や文表現で検索すると関連するデザインの種類がいくつか表示されるようなヘルプであってほしい。 今 Chrome ブラウザで日本語にpartsutagioを翻訳しているが、assembulyでは翻訳機能が働いてもくれない。 アセンブリーでも翻訳できるようにしなければいけない。 日本でonshapeを広く売り込むには上記の改善がなされなければ望めない。 すでに改善が存在するなら教えて欲しい。…
-
Circular pattern on text
Hello, Is there a way to use the circular pattern tool on a text element in a sketch? I like to place several text elements on a circle radially facing to the center of the circle (like the numbers on a watch face). My idea was to create one text element at the 12 o'clock position and them use the circular pattern tool to…
-
Improve surface of complex shape
I try to create the head of a fantasy panda. The result is not as smooth as I wanted it to be. So I'm asking you if you recognize mistakes or space for improvement. For that I'd like you to quickly guide you through my process: I started with this sketch. The head consists of two splines. I made sure the had the same angle…
-
What causes "loose" endpoints in a silhouette edge?
Draw a circle in the top plane and extrude a cylinder. Create a sketch on the front plane and view normal to the sketch plane. Use the "use" tool to create a silhouette edge on the side of the cylinder. The sketch is not fully defined. In the sketch diagnostics tools, the endpoints of the silhouette edge are considered…
-
Constraints and An Unwanted Entity I Can't Remove
I'm new and constraints are hard for me to grasp. Been looking for some good tutorials on them. Didn't find anything that helped as much as I needed but enough to get me going. I sort of understand the constraint manager. I think I am getting close on this drawing. I have a spot with a round blue or orange spot depending…
-
Auto Layout leaves one part "out in space" and non-planar
Hello everyone. I'm trying to layout parts of a speaker cabinet to cut from a plywood sheet on CNC. When using the Auto Layout FeatureScript all but one of the parts is laid out nicely on the sheets. For some reason the script leaves one of the parts "out in space", does not place it on a sheet, and has it angled on a…
-
How to make cyclodial gear.
I need help to make a cycloidal rack, I found equations online for x and y that can be implemented in 3ds or fusion360 but there is no description anywhere on how to do it in Onshape. I also found that in feature script there is a parametric curve option where you can enter equations for x and y but I can't get that…
-
Problem with a script that sometimes doesn't work
If I create a point and run the script on it it doesn't work And it only works on a point of a 3D object. FeatureScript 2931; import(path : "onshape/std/common.fs", version : "2931.0"); annotation { "Feature Type Name" : "lcdhole" } export const lcdhole = defineFeature(function(context is Context, id is Id, definition is…