Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:
- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Onshape Forums
Discussion List
-
The "Export DWG/DXF" option has been removed for student accounts?
I've been using OnShape for some of my classes to create DXF files for my laser engraver as part of a manufacturing unit. Last year this was available, but when I went to have students do this again today, the option to export from a sketch no longer seems to be there for them. It is there for me on their assignments. Is…
- How do i export as a DXF to Xometry to get my drawing made into a part
-
Export 2.5D DXF?
How, if you can in OS, do you export a DXF that is 2.5D? I've attached an example. Vendors request DXFs of this item, in SW I can export a dxf from a view and Bob's your uncle. The only way I've been able to do that here, is by adding it to a drawing. Which is very clunky as far as user and vendor experience go.
-
dxf exports are blank
Why is my DXF export of a drawing blank when I try open them with any 2D CAD? Tried all versions R11 to 2018 on the export.
-
Planar surface DXF export misses features
Hi, I have a model with some fairly complex geometry. If I select a planar face and use the 'export to DXF / DWG' option to build a DXF file for our laser cutter the resultant file has a lot of line segments which are either in the wrong place or are missing entirely. Some faces export okay, some are completely broken with…
-
DXF export to Retina Engrave
Hello all, I have searched and found a couple of posts but no real answer to my issue. Problem: When I run my laser cutter the lines are not connected and the laser cuts lines individually jumping around rather than cutting them as if they are joined. What I've tried: I have tried exporting by right clicking the sketch on…
-
export DXF from Oneshape Drawing
Hello,we have a problem exporting DXT from drawings for laser cutting. We use Release 11-12 for DXF export because the DXF file is the smallest of all other releases. But when we want to hide some edges in the onshape drawing (holes or chamfers or something else), those edges still show up in the dxf file. The drawing…
-
Problem with modeling non-symmetrical teeth using Chamfer and Circular pattern
Hi everyone, I’m having trouble modeling teeth along the edge of a metal plate for my project. I sketched a circular pattern line (top of the tooth – bottom of the tooth - top of the tooth and so on), but every time I try to use the Chamfer function, the geometry overlaps with the adjacent part (as shown in the photos).…
-
Batch Engraving Different Logos on the Same Part
Hi everyone, I’m working on a project where I need to engrave the same box divider part with multiple different logos. The goal is to create identical parts, each with a different logo applied. All the logos have the same bounding dimensions, and their placement on the part will be consistent. Is there a way to automate…
-
Sketches won't loft
I am trying to get the two faces in my document to loft be each time I try the inner profile just goes red. No idea how to fix this, would really appreciate some help. https://cad.onshape.com/documents/a029e4e0f14f06e8c8efb638/w/5c0b632cb8f6c2a9d3d007c4/e/e7762b37295653af6d83ecfc
-
Is there a Featurescript for finding and replacing certain dimensions.
I have sketched several dozen and I need to do it without going through all individually. I thought I saw a video for onshape that used this 'script.
-
I am trying to place an Expl. Mate Conn. into both parts to facilitate placement into an Assembly.
The part shown below is located on a conic surface. I have a square pin on the Gray part ( aka Manway ) to mate with the corresponding square hole in the Green part in order for alignment purposes. I understand how on a flat surface with a defined center, but not on a curved surface. Hopefully I am describing it OK.
-
Same material across all configurations
As an exercise I'm creating a configurable fastener to which i'm tring to attach a material, finish and part number from a catalogue I use regularly. I have discovered that assiging a material only applies to that unique configuration. Of course I want all configurations to be the same material. Perhaps there's an order of…
-
Using the hole table in a drawing of a composite part
I am currently drawing up plans for a new balcony, which includes drawings of two composite parts that also have a number of holes in them. In order to keep the drawing somewhat tidy, I'd like to use a hole table, however it seems like this is not possible with composite parts(?). In the part studio, all the holes are…
-
Is there a way to edit or delete a "version"?
When I was introduced to the "version" system, I assumed it would behave somewhat like the SolidWorks Configuration system - as in one could have an assortment of versions that belong in different assemblies. This would also explain why a version of a document is required to insert a part into an assembly. However, the…
- why cant I load previous docs? free subscription
-
Revolve cut on sheetmetal
I've done a convert sheetmetal, but it has two holes in the original piece, iti is a bigger hole conected to a smaller hole, in solid it is okay I've tried to this in a sheet metal part, using loft, revolve and can't make it work, can you guys give me a light ?…
-
attractor help
trying to make a golfball like pattern to a handle, but i cant get the halhalf sphere to stay inside the sketch. only when i press ''pause regeneration'' it will snap in to place. please help!
-
How to find what is "not fully defined" in a sketch the is all black with no blue dots
Every so often I end up with a sketch that is not fully defined with no blue showing. The normal problem is that the undefined point is under a defined point. The only way that I have found to find the undefined point is to remove constraints to move the existing lines until I can find the actual problem. Is there a way to…
-
New Feature - Banana for Scale
Get Banana for Scale Here Do you struggle to design real world objects within the confines of a computer? Do you lack the discretionary funds for an apple vision? Do you have difficult design constraints such as "would a banana fit in here?". Introducing the newest feature from the SmartBench team - Banana for Scale.…
-
Feature pattern with relative positions
Hi, I wondered if something like this is possible: say you have a "linear" pattern, but instead of setting the distance (and direction), I can simply select a face or mate connector where that same feature should be applied. Maybe even a list. To give an idea, in following part studio, in folder "Elastiek houders", I have…
-
Why can't I delete an imported DXF?
I'm playing around with creating my own document template, following the procedure in Best Practices for Creating Onshape Drawing Templates - Onshape Learning Center. An imported DXF appears as a tab at the bottom of the document, like a part or drawing would. This is the only type of tab I've seen that does not have a…
-
setting diameter of circle
Step 1 : click on Add Sketch button Step 2: click on existing face on model Step 3: click on Center Point Circle tool Now here is the problem, I need to specify the exact diameter of the circle, but hitting the number keys when I am in Center Point Circle tool mode doesn't do anything
-
OnShape not connected error.
Hello fellow Shapers, I am new to this system and experiencing difficulties getting up and running. Every time I try to open OnShape to begin a project I am met with the Error 'Onshape is not connected. Your document is saved. Refresh the browser to continue.' Safe to say refreshing the browser does not work. Any help…
-
How to change the size of circle diameter
In tutorial video 2 there is a menu item to change the dimension. in new version there is no such an option. How to change the sizes of the fugures?
-
How to make a cylindar into a 45 degree angle end?
Hey, I was wondering how to make a cylinder into a full 45 degree cut in Onshape? P.S>( sorry for the bad drawing, trying to make it on Microsoft paint with a touchpad.)
-
Learning center lessons not showing?
I went to show my students the learning centre this morning and the actual content is in a letter box about two lines high and un usable. The transcript below is fine. This is on edge and chrome browsers. I'll post a screen shot when back at my desk tomorrow. Just thought I'd post while I remembered. Here is a screen shot…
-
Custom Feature: Dials!
DIALS FS I hope this will one day become as indispensable for the AMP industry as SpeakerPattern FS is for the speaker industry :) It’s a feature that lets you design all kinds of dials for clocks, tachometers, synthesizers, nanometers, amps, and more. From a designer’s point of view, it’s great to have a tool that lets…
-
Drawing line colors to match model appearance
Is there a way to make the drawing line colors to match the appearance colors in the part/assembly? In drawings with lots of details it would be nice to change the colors to differentiate the parts/features. I can change certain aspects of the view colors such as hidden lines, threads, bend colors in the Drawing Properties…
-
MBD - How to place datums on dimensions or feature frames?
I cannot see the method to attach a datum to a dimension in the MBD toolset. Is this not currently possible?
Categories
Popular Tags
- featurescript 890
- drawings 614
- assembly 444
- sketch 429
- assemblies 379
- improvements 358
- help 331
- part studio 322
- configurations 307
- feature script 301
- Sheet Metal 296
- drawing 254
- how to 250
- feature request 242
- mate connectors 235
- loft 216
- export 209
- api 200
- dimensions 199
- extrude 196
- sketching 195
- voting 187
- variables 180
- improvement requests 174
- mates 162