Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:
- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Onshape Forums
Discussion List
- can you make a sketch with reference geometry on an assembly?
-
What is the best organization of my project? A single Part Studios and multiple Assembly tabs?
I’m still very new to 3d modeling and ONSHAPE, but I’m learning quickly. Right now I have two completely separate projects to build two different versions of a V8 engine intake manifold, but I want to re-organize this to have only one set of documents but two different outcomes. After a lot of thought, I think the right…
-
Why can't you define a mate connector with another mate connector?
This seems like an unnecessary limitation.
-
is there a way to know in FS if the tolerant dimension is active?
I've started implementing the UIHint_CAN_BE_TOLERANT in my relevant custom features. one of them is the makeRadius FS wich can set a cylinder or conical surface at a certain radius. if it is a conical surface, my edit logic will add a required query for an edge to measure and set the radius at. I believe only cylindrical…
-
Activity
Hello, well I don't know if I am at the right place, but I will ask a question and if I'm at the wrong group please let me know. We are using OnShape to teach students of Mechanical Engineering the CAD basics. During our course we have couple of small exams and those exams differ from classroom to classroom (we have 40…
-
Introducing the Onshape Educator Plan!
Exciting News for Educators! We are thrilled to introduce the Onshape Educator plan! This innovative offering is now available for free to teachers and mentors dedicated to shaping the future generation of engineers. Tailored to optimize the CAD and data management capabilities of Onshape, the new Educator Plan encompasses…
-
Suggestions on a better way
New to onshape and struggling with getting some ribs on the surface of this part. I expect there are much better ways to create the shape and / or to add the surface wrap of complex curved faces. I am open to hearing all of your advice for making something like this a better simpler model. Really hope I got the link right…
-
imported a file
i imported my file and nothing will let me fill or add extrude etc. i have been trying to figure out why i cant fix it so i can fill in fo i can print it what am i doing wrong.????
-
New feature - Text to CAD... entirely within featurescript
Text to CAD is gaining a lot of hype lately, existing implementations are slow and require immense resources. So I've created an AI entirely within Onshape only using FeatureScript. Simply put in a prompt, and get a CAD model! Its a basic implementation - currently the model is only trained to build cubes, cylinders, and…
-
SET COLOUR, MASS, AND CUSTOM PROPERTY OF GEOMETRY CREATED BY FEATURE IN ONE GO
I have modified the standard sheet metal model feature to be more straight forward for me. If I select a particular material in my custom sheet metal feature, at the moment it sets the thickness, inner rad and kfactor to the appropriate values. Would be create if it also could set the colour, mass and assign a string to a…
-
How to update many feature variables at once via the API
Hi, I have built a model in PartStudio using feature variables. I want to remote control the model via an app, and have successfully managed to update variables using the PartStudio/featureId/{fid} endpoint. However, for bulk update of many variables (~15) this is too time consuming. So I tried several ways to bulk update…
-
how do i do this triangel?
hi, i'm new to onshape but have managed to draw a hinge for fun. but i can't get these "triangles" to be filled and go like a smooth curve. is there anyone who can help me? have tried using fill and everything else that google ai has come up with tips but they don't work. can someone show me or go into the direction and…
-
Unable to export a specific model. Another model in the same studio exports fine
https://cad.onshape.com/documents/a88d67fcb458af325efbfa1a/w/527ed5980ff2162ab5c51bb8/e/d026e1e6456eb04e4d9ba62c 4" SQ CC COVER FOR (2) DUPLEX RECT fails to export for me but the other XT60 holder exports fine. Exporting to STEP format as a download. No matter what name I try it fails with the error "Export failed" and "……
-
Using midpoint to align entities
I cannot seem to make 'midpoint' work in any useful manner. If I select a tool, selecting the midpoint tool deselects the first tool. For example: 1. I draw a construction line perpendicular to a line segment. I want to align (move) the construction line onto the midpoint of the line segment. Nothing works.2. I want to…
-
How to extrude on a chamfer
I have a rectangular pocket with a 45-degree ramp (created via Chamfer 1). I am trying to extrude two rails (Extrude 3) from a sketch so that they stop perfectly flush against that 45-degree angled face…
- how to make a sketch
-
Custom Feature - Random Extrude
Random Extrude What does it do? It extrudes selected faces a random amount within the given range. What else does it do? It can also loft those faces to a point (making pyramids). What more could you need? SmartBench Software
-
Import sketch into feature without sketch being placed in part studio graphics area
I can't figure this out. I have a feature that allows the user to select a sketch from a different part studio in the same way that the frames feature allows selecting one. For some reason, when using the feature, it seems like the feature is deriving the sketch into the part studio graphics area which is not needed for…
-
sweep twist - Boolean fail
hello, in my trying to better understand the new additions to onshape i tried the following: mind someone explain to me why doesn't it work?
-
Create a Property in an ITEM that contains a URL to a Workspace or Document
I think I have read things that indicate this is possible, but not sure how. Can I create a Custom Property that contains a URL/Link to a workspace or document inside or outside of Onshape? In the 'Types' list for custom properties I do not see URL: as an option.
-
trying to run a simulation on a mcmaster part
I imported https://www.mcmaster.com/90156A609/ into my design. I am trying to run a simulation to see how the hardware reacts under load. I assigned materials to the imported parts, but Onshape serves a "no material applied" error.
-
BOM table in template becomes empty table in new drawings
Since last week, the BOM table in my new drawings doesn't have the variables for properties/metadata. The drawing template has the properties there, and it was working not long ago. Did something break it?
-
sorting public document search results by likes, copies, links
public documents are a powerful tool for open source as they allow modification and improvements. when searching for a project sometimes I want to see the leading projects in a field, i.e 3d printers. there used to be the option to sort public document search results by likes, copies, # of links. now it is gone? strangely…
-
I wish to extend the walls but either method works
I am trying to extend the side walls but OnShape fails whether I extrude in any direction. I can only create a new object however then boolean will fail here is a link to the document itself should anyone wishes to inspect:…
-
Split Part using Ruled Surface?
I've been working with some laser cut tubing recently, and have had to go back and forth with suppliers about normal-to-surface tube cutting that doesn't exactly match our model. I've found guides for normalizing coped and mitered cuts on round tube, and used them to come up with a process for transforming a tube modeled…
-
how to fix issue when drafting with extrude remove
i'm trying to remove solid extrude my initials from a part, with it drafted inward, but it won't work, despite it working with the exact same setup, but different parts, on 5 previous documents. my initials were the exact same height on all 6 documents, and they all have plenty of extra room to extrude, yet it keeps giving…
-
Share/edit a document from personal to education enterprise on same e-mail
I have one e-mail address for OnShape "personal" and education enterprise accounts through my work e-mail. I have to sign out of one account to get to files on the other, and seemingly have no way to share between the accounts without transferring ownership. I have noticed my labels show up on both accounts and randomly a…
-
New Custom Feature: Standard Bearing
I needed to chuck an MR63 bearing into a project I was working on, and got a little sidetracked. Built a custom feature to generate deep groove bearings for basically all ISO standard sizes. Includes the following bearing families: 6000 series 160 series MR series MF series 600 series F600 series R series FR series in…
-
Select edge of extrude? (resolved)
I'm suddenly having trouble doing something I swear I've done before: selecting edges (not the face) of an extrude. Make a rectangle, extrude. Now, I want to select the edges of the top, and chamfer the edges. I can't convince the UI to select individual edges, only the face. This matters, because what I really want to do…
-
Best approach for a curved object?
I want to build & 3D print a model car and am getting frustrated because I can't get the rear end to look the way I want it to. Basically, it should be rounded in all directions and have a raised section behind the driver's seat, similar to classic race cars from the 1950s. Here are to two projects I've only reproduced…
Categories
Popular Tags
- featurescript 890
- drawings 614
- assembly 444
- sketch 429
- assemblies 379
- improvements 358
- help 331
- part studio 322
- configurations 307
- feature script 301
- Sheet Metal 296
- drawing 254
- how to 250
- feature request 242
- mate connectors 235
- loft 216
- export 209
- api 200
- dimensions 199
- extrude 196
- sketching 195
- voting 187
- variables 180
- improvement requests 174
- mates 162