Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:
- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Onshape Forums
Discussion List
-
Sheet metal flat pattern through the API
I thought I had seen this as an end point in glassworks but I now seem to be unable to find it listed. Is there some way to access and export sheet metal flat patterns through the API?
-
How can ajuste the speck of a steel tube?
I need to work with section of steel tubes witch are not available on the list in the "Tube " tool. many thanks michel
-
Extrude remove not working on some of my models
I have created 7 model surfboards in three of them i can extrude remove a circle hole to put in a magnet 1 cm forward of the midpoint of the board.. in 4 of the models, I cannot. The extrude turns red.
-
Custom Feature: Bip Joints - A Hand Bendable Sheet Metal Joint Feature
-Link to feature up front- If you're a producer of sheet metal parts, or design your parts for sheet metal production, there's a strong possibility that your manufacturing pipeline is catered towards hard flat flanges with edges parallel to the bends because that's what the manufacturing process favors. This manufacturing…
-
why am I not getting any sound on some lessons?
Learning Centre
-
How to get URDF export to include composite parts?
I have a cart assembly which I'd like to export as a URDF. Most of the parts are imported from the extrusion-maker's STEP files. I imported some of the complex components, like the wheels/casters on the bottom, as composite parts. My assembly just mates many of these composite parts + assorted other parts. But these…
-
Changing the numbers in a list in a drawing note
Hi all. I remember in a recent Onshape update (but can't remember which) we got the ability to manually adjust the numbering of lists in note on Drawings, but I cannot recall how to do it. I tried looking in Help, and the AI advisor offered the following; "In Onshape, you can easily modify numbered lists in notes by…
- Want to sketch similar design
-
Best way to pattern Honeycomb part
Hello, I'm looking for the best way to make a Honeycomb wall. unfortunately my part has some "complex" geometry so I can't seem to get the fill pattern tool to work. I started by created a single cell and then orignally did multiple linear patterns to form the wall. I have tried this 2 difference ways one taking 8.91…
-
Have I understood the document / part hierarchy correctly?
I'm about to start drawing up a CNC machine I've been planning for a very long time. I designed it originally (many years ago) in SolidWorks but I no longer have access to that software so I'm redrawing it in OnShape. I would like to check I'm approaching this in the correct way. As I understand it a Document is…
-
Is it possible to duplicate tapped holes when mirroring a part?
I'm fairly new to OnShape and CAD in general so please excuse me if I use the wrong terms. I'm building a CNC machine, the image below shows the gantry. I've mirrored the left side plate over the to the right. On the left side plate I've added a number of counterbore holes. The threads are in the edge of the orange front…
-
Why isnt the object considered a part?
I made this pin and want to cut a section out to make it 'pinchable' But I cant cut it out as it throws me the error "No merge scope" Which is as I asume from the fact that onshape doesn't consider any parts are in the project yet, it only lists one surface. To me the part is fully closed off. I used the revolve function…
-
Can someone please help me understand why the linear feature pattern isn't generating some instances
The Linear feature pattern sometimes skips over some instances but then generates the next one. Can someone please help me find out why? The doc in question is in the link below and its in part studio 1. https://cad.onshape.com/documents/a0ae54924a1679b616eae9bf/w/0b79df286c600cd916f699ef/e/87b6c1b89e8908be90fa00e6
-
Struggling With Turning 3D Scan to Model
I'm using 3d splines in an effort to trace this 3d scanned part for smoothing, editing, and ultimately slight redesign of the part but the fill panels aren't even generating as I'd hoped.. I thought of using a loft but struggle with trying to trace the shape effectively. I've made the document public… any help or inputs…
-
Dynamic Suppression of features based expression if a certain Configuration is active
I like to suppress feature based on the configuration, is there a way to do this in the dynamic suppression expression to check which configuration is active or some other way. I can make a variable and set it but this would be simpler.
-
hole in the rounded part
Hi Everyone. I consider my self as a noob and a very beginner in onshape app hence looking for help here. I'm trying to create modified version of inlet to my dust extractor. So far I was able to make some basic shape of it but I've stucked on making a hole inside this part. Can You please guide/help me on how can I make…
-
How do you change the dimensions in a sketch on iOS?
so far, after approximately an hour of searching online, going through Help documents, clicking every dimension tool I can within the app, there seems to be no logical or well laid out way to change the dimensions on an object. I am at the verge of giving up entirely on this app and calling it poorly designed. Please, if…
-
Improvements to Onshape - January 30th, 2026
Welcome to the new release! We're excited to share with you several different improvements spanning drawings, part and assembly analysis, and rendering - as well as a highly-anticipated sheet metal capability. Let's jump right in. CAD IMPROVEMENTS SHEET METAL LOFT You can now create complex sheet metal parts by connecting…
-
Reuse Sketches
Hi everybody! I have an issue that I run into every once in a while that I'd like feedback on from the great community here. Sometimes, I find myself wanting to reuse sketches. This could be the shape of a specific punchout for a connector that I might need to use several times in the same part, and/or reuse in other…
-
Improvement Request: Fix the Hole Tool Terminology in Traditional Chinese
As an educator using Onshape in the classroom, I’ve noticed a critical translation error in the Hole Tool that leads to student confusion: Currently, the terms for Counterbore and Countersink are mistranslated or swapped in the Traditional Chinese interface. Counterbore (Flat-bottomed hole) should be 沉頭孔. Countersink…
-
Select chain of sketch entities / Select closed loop
Hello: I want to select the highlighted sketch lines pictured below so I can convert them to non-construction lines (with the hotkey Q). In SOLIDWORKs, you could right-click any line segment and choose "Select Chain", which would highlight all the attached sketch entities. I had to manually hunt and peck each line to get…
-
creating an ISO or ANSI thread is easy. However, how can I create very wide pitch without depth.
I want a "spiral" thread. One or two turns to move the nut 10mm. Example use: twist top on a jar or bottle. I guess it would be the same as creating a thread for a screw rather than a bolt.
-
Need help: Cannot select face for Sketch Plane
: "My sketch plane is stuck in the middle of the part and I can't select the front face and I can't find the tools for selection filter." Cannot select part face for sketch plane / Hole start issue. Hi, I'm trying to create 6 holes on a circular face, but Onshape won't let me select the face for my sketch. It keeps…
-
Variables and Expressions Lesson
Good Morning, I use the variables and expressions lesson from the Learning Center https://learn.onshape.com/courses/variables-and-expressions to teach my students about the proper use of variables and expressions. Last November I had no issues with this content but today we discovered as a class that the Creating and Using…
- how to clear bad gateway error
-
Parts in my assembly have skewed axes of movement using planar mates.
Thank you to anyone who is reading this question. I have designed a speaker cabinet that will be built using plywood, and need to layout the parts flat to make toolpaths for CNC. I have used the Auto Layout feature script for other projects, but for this project I need to manually lay out and arrange the parts on a flat…
-
paid help want to jump start a parametric sheet metal project
where or how do i get help to create a project correctly I fear i will spend days weeks doing workarounds fumbling to create. Feel better in using paid help to get the fundamentals right so i can run with it
-
Query custom tables from the API
I am consuming the API, and I am interested in knowing if there is a way to query custom tables from a Part Studio. I have the following Feature Studio that generates the custom table I want to query:
-
New FeatureScript - 4D fold (Foldin'-the-box)
Link first This feature is inspired from Hackaday post by Arya Voronova that showcase some really cool ways to make complex parts with support-less additive manufacturing. Its original intent is to target additive manufacturing, but there's likely more use cases, as @elijahpekaar pointed out. The idea for an Onshape…
-
Printable Counterbore FeatureScript
This is my first time trying out creating a FeatureScript. It's all vibe-coded but works pretty well after some tweaks. It takes ideas from https://www.baysingersadditivemanufacturing.com/design-floating-holes/ and https://blog.rahix.de/design-for-3d-printing/ for how to modify counterbore holes to better handle floating…
Categories
Popular Tags
- featurescript 890
- drawings 614
- assembly 444
- sketch 429
- assemblies 379
- improvements 358
- help 331
- part studio 322
- configurations 307
- feature script 301
- Sheet Metal 296
- drawing 254
- how to 250
- feature request 242
- mate connectors 235
- loft 216
- export 209
- api 200
- dimensions 199
- extrude 196
- sketching 195
- voting 187
- variables 180
- improvement requests 174
- mates 162