Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:
- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Onshape Forums
Discussion List
-
Create a solid part from Surfaces/Composite Parts
Hi all, I have a surfaces/composite part model that I want to turn into a single solid so I can create cut outs. Anyone know how I can do this? File is below. Thanks in advance https://cad.onshape.com/documents/21b70d3354c4cef991db9e6f
-
Is there an auto update on in context sketch/parts?
Howdy All, I have a shackle assembly that includes a tether rope (see below). The rope was created using in-context sketches that project the sketch location. There are two sizes of the shackle assembly, each with its own configurations for the body and pin. However, the rope was created without configurations. The issue:…
-
Bug in line tool?
I have a video and a link to file But why on earth does it behave like this or am I st*pid? Main question, why does the middle point lane , that's connected to the center point of the line thats made with offset tool. Why does this Middle point line change the length of the offsetted line not just extend the line staying…
-
any "unique sculpting" scripts?
I've been on the lookout for scripts that can add "uniqueness" or "life" to some models. To explain my question: This is "wood grain" script (mainly used to "show" that a part is "wood-like") But if you don't use it for its "Intended Purposes" you can make intresting models… If you know any script that have such…
-
Slider Z variable output
I have a slider mate and would like to display within an assembly (somewhere) the Z variable value as a text output. That is display the Z position in plain text. Is this ossible, and if so how please?
-
How to make loft follow guidelines on edge?
Hi there, I'm trying to make an F-35, but have some issues with the front portion. I've created a loft, and added guidelines using 3D fit splines which go from vertex to vertex. However, when I add this as a guideline to the loft, it doesn't touch the curve at all! Additionally, when I pierce the curve, and connect a…
-
Why can't I get Transform Tool To Show on the RIght Click Menu?
When ever I click my sketch and they right click it, it shows "Edit Sketch" at top of menu but there's no "transform" option. I have seen countless videos of using the transform tool but can't figure out how to get it to show up.
-
Challenges App - Multi Step
I recently came across the Challenges App in OnShape and am enjoying it. However while doing my first multi-step challenge I ran into a problem. After completing the first step of the challenge successfully I moved on to step2. While working step 2 I was logged out somehow and needed to log back into OnShape. However, upon…
-
Don't know how to delete a post
Solved a problem on my own before anyone saw my post. Now how do I delete it?
-
How do I change how onshape names my sheet metal flat patterns when I export them?
example: I export a flat pattern to DXF to nest and cut on a laser table. the file is exported as the project name, great, and then the files show as "project name - Flat Pattern of Part name" I would like the files to just be named "Part name"
-
Wood grain texture Custom Feature
Often when modeling furniture and other objects created from wood I want to communicate the orientation of the wood grain on a part. This eliminates confusion when creating the parts in the workshop. To solve this I created a Wood grain texture custom feature! This low resolution feature is intended to demonstrate the…
-
Shadow from point source?
Hey! Does anyone know if there are featurescripts out there that generate a shadow of a part from a point source? I've tried all of the related featurescripts (Shadow, Outline, Project Body), but they all seem to project the edges of a part from a planar light source as opposed to a point source. I can certainly do this…
-
Certification Exam Log In
I can't seem to log into my account to take the Onshore Associate Certification. Does anyone else have this issue?
-
New Custom Feature: Animate
Onshape's Animate feature can only animate one mate at a time. Adding gear relations between mates can make animations more interesting, but if you need an animation showing a sequence of events, then there is no easy way to achieve this other than using the amazing (but manual) technique developed by @john_mcclary This…
-
How to change the dimension to be place in horizontal way respectively ?
In a small space of diameter dimension, I want to change the two arrows to be only one. How can we do ? Meanwhile don't know how to change the dimension to be placed in horizontal way respectively.
-
Displacement boundary condition?
Hey, I try to start using FE simulation tool in assembly. Looks good, but I really miss a way to define a displacement (instead of force) as a boundary condition. Is there a way to do this? Is it hidden somewhere? Or is it planned to be added in a few days...? Thanks for your help.
-
Simulation Results
I developed a model and assign materials for the assembly. But still it shows that material has to be assigned and cannot run the simulation. I have uploaded few screenshots and hope you may understand and please help me to figure this out. Thanks for your support, Dilshan.
-
Best way to construct a rex axel shaft from gobilda?
HI, I was trying to construct a rex shaft from gobilda into our robots cad but realized it was a lil tricky. Can you help me or show me a model of this? The measurements should be as shown on the gobilda website. Thanks.
-
Imported a Solidworks assembly zip. Copied & modded a part. Assembly is gone.
I imported a display case sliding glass door assembly zip into Onshape. I needed to make 3D printed jigs so I can router out slots and holes in a real life scenario. I was doing the work in Solidworks with a perpetual license but decided to give onshape a test since this is an important project and I wanted to put Onshape…
-
Assembly update after part development/modification
Dears, I'm facing a problem I cannot solve up to now…. I started the design of a new part in an assembly using the button"create part studio in context". Up to this, it's working fine, and so I can design the first part, a first extrusion., and a new part file was created. I also suceeded to design a second extrusion,…
-
Export to 3mf does not export the NPT thread
I've created a simple model, with a hole tapped with NPT 3/4" - 14 TPI. I need this 3D printed, so exported in to 3mf (Prusa slicer). In the Prusa slicer the thread is not modelled. Questions: 1: what am I doing wrong to get the thread exported? 2: why is the thread not tapered in the design in onshape (bottom diameter is…
-
Cylinder. Extrude a turning angle
I have a cylinder dia. of 114.59mm with a height 100mm. I am trying to remove a 2mm x 2mm trough at the 45 degree mark on a 4.5 degree angle. I tried changing the plane angle but the extrude ends up shallow on the other end. Any other ideas?
-
Define thread length with a linear dimension instead of a callout
I'm looking for a way to dimension thread length with a regular linear dimension, instead of a callout, because some situations would make it much clearer where the depth should be measured from. In the drawing below, for example, the reference for the depth of the M10 hole is "A", but the callout dimension starts…
-
Folding "sheet" on itself?
Hello. I'm trying to create a tool to fold a sheet of paper/fabric on top of itself. The idea is to have flat pipe transit into folder form: I thought a simple loft will do the trick, but it turned out to be more complicated than that - the loft failed. Then I tried adding intermediate stages to guide the loft, but it…
-
CAM Textures - wood effects in particular.
Where would I look for a software or the the ability to add a wood texture onto a part that is the mould for a wood plank - approx 300mm x 1200. Is this possible in the CAM module . Are there artificial wood cutting paths to get that effect? The texture could be a jpg image that is converted using contrasting heights and…
-
How can I improve?
Hi, I am currently a high school student and have being working on a little side project of mine. I discovered OnShape about a year ago, but I haven't started getting serious about it until recently. I am completely self taught and use public files as inspiration and design workarounds for my current project. My project is…
-
Can I export sub-assemblies defined relative to the origin of the main assembly?
I have a big assembly composed of parts and sub assemblies. I'm trying to create an SDF robot description file from this assembly, and so I'd like to export all the sub-assemblies as STL's and calculate their inertial properties. The problem is that I need the exported STL's to be defined relative to the main assembly…
- How to I design 2D Drawings to use as my prototypes?
-
Some of our files are missing.
Hi, We have some missing files. I have checked in all the boxes to find them but they are gone. (Created by me, trash) Nothing the files I am missing have labels Ainsley and Emilia. These were there last week, but when the students went to go to them the last couple of days they were missing. Is there only so many files…
-
How to fix weird loft contours
I'm currently designing a fishing lure using lofts, which is causing some undesirable bulging at the nose. How could I fix this without changing the profile of the bait? I have linked the document below. Thanks!
Categories
Popular Tags
- featurescript 890
- drawings 614
- assembly 444
- sketch 429
- assemblies 379
- improvements 358
- help 331
- part studio 322
- configurations 307
- feature script 301
- Sheet Metal 296
- drawing 254
- how to 250
- feature request 242
- mate connectors 235
- loft 216
- export 209
- api 200
- dimensions 199
- extrude 196
- sketching 195
- voting 187
- variables 180
- improvement requests 174
- mates 162