-
Drawing reference field to approvers in multi-tier release workflow
As an example, if you have a multi-tier workflow that consists of Engineering approval and QA approval, respectively. Is it possible to add independent drawing references that reference the respective approvers and dates of approval?
-
Trouble logging on
My students do not receive the email with access code to log into Onshape. District is not filtering out email and we checked spam folder, no results. We are new to Onshape and wonder if the issue is on our end. wcattin@lwsd.org
-
Help! Onshape parts will no longer move in an assembly?
I was 98% done with a robot prototype when I lost the ability to move the parts in an assembly to create the final robot design. Everything is fastened mated as far as I can tell. This is my very first Onshape student project.…
-
I am trying to extrude the shape of my skec
-
Trim function doesn't seem to work.
I have drawn a square and a circle with the circle centered at the midpoint of one side of the square. I would like to trim away the parts of the circle overlapping with the square, but nothing happens when I choose the trim function and click on the parts of the circle. To see the trim function appear in the ribbon at the…
-
How to use the Trim function.
I have drawn a square and a circle with the circle centered at the midpoint of one side of the square. I would like to trim away the parts of the circle overlapping with the square, but nothing happens when I choose the trim function and click on the parts of the circle. To see the trim function appear in the ribbon at the…
-
How can i creat a mate relation between a spur gear and a stationary internal gear?
Hello! I am fairly new to Onshape and in CAD design in general. I am making a project wherein the rotational motion of the swing door is converted to a one way rotation of a generator shaft. In order to do this, I place a stationary internal gear at the top of the door with its center aligning with the axis of rotation of…
-
Various threads heights on uneven surfaces -
Hi anyone I need support to make threads on a uneven surface both with cylindrical, conical but also barrel shape surfaces. The height of the threads various as well. I have enclosed a part with the shapes including a sketch showing the outer shape of the thread heights. I hope anyone could support me with finding a…
-
Propertie to a whole document
Hello, I was wondering if there is a way to add some properties to all the parts from a document or just a tab, for example the project name? For now I have to add a project for each parts from the same document. As the same when we use the automatic part numbering is there a way to do it for all the part in one time? This…
-
Creating Basic Parts Features: Excercise Sweep
I'm working through the sweep exercise (Self-Paced Part Design Using Part Studios) and have a basic question regarding step 6. They create a sketch with the right plane, and then make the circle to be drawn Coincident to align with the previous sketch. My question: When I created my sketch I have it offset from the origin…
-
As a generate string to -> ASCII Binary (FeatureScript to generate QR )
Hi, I'm trying to create a FeatureScript to generate QR as a solid body. The question is: As a generate -> ASCII -> Binary Hi, I'm trying to create a FeatureScript to generate QR as a solid body.Is it an easy way to generate an ASCII Binary?(Surely something easy lol)const chrMap_Binary = { '=' : "00111101" ,// chr(61) '>'…
-
Vertex/edge/face IDs
I export part geometries (as STEP files) for use in 3D multibody simulations. I often add new connections to parts before simulation---to apply forces, add pulley or gear constraints, maybe sense motion---and these are ultimately based on the IDs of vertices, edges, or faces that I select from the STEP file geometries I…
-
Keep same sketch and feature dimensions while changing Workspace units
I made an IR to scale the geometry while changing the Workspace units. https://forum.onshape.com/discussion/12587/keep-same-sketch-and-feature-dimensions-while-changing-workspace-units/p1?new=1
-
DWG Import and Printing
When I request PDF Printing of an imported DWG, it creates a PDF with the image in the lower left corner. Is there any way to modify some sort of preview here?
-
Spring_GeneratorFS question
https://cad.onshape.com/documents/e962c03684a97b9568b92c37/w/dd893095a99b64b5e8c7e121/e/02a239dc0a9ac72a1e932004 Can please someone help me out, I am struggling getting the result as shown PartStudio1 PartStudio2 -> /** @ NeilCooke You can't pick out a specific sketch entity using id + "arc2" (that does not exist as it is…
-
Don't know why mateCS behavior different than expected.
I got a mate located here. How can I then get the location of the mate in the world coordinate system? Also, It seems in the occurrence's coordinate system, the mate is not at the origin but the API gives "origin" : [ 2.5117617568793384E-18, 0.0, 0.0 ]", why this is not the case that the mate location is relative to the…
-
Hi
I found that in freecad app. That step is imported much better. Solids come seperately and all the lines are collected into one part.
-
Come aggiornare una classe di studenti
Gentilissimi, grazie a tutti per condividere un ottimo software come on shape Sono un docente e devo aggiungere alunni in una classe già creata. dove si modifica?
-
Korean Font
My annotation font is set to KOREAN, but Annotation icon tool does not support Korean Font like following fig, https://cad.onshape.com/documents/4db4387ea72b59f4b5ee47c1/w/5ddfedcab38d60a3a822a358/e/50f6bf67fa19b0763b3935d7 Any Ideas?
-
Use 3D scan in Onshape
there were number of posts on why Onshape is not the tool to use mesh, but I still want to incorporate it into my design, maybe you can suggest overall process, outside Onshape as well. I have a slab of wood that I plan on using as a tabletop for a c-table.…
-
What is a matedCS?
In the queries of assembly API, there is a field in the featureList called matedCS, what exactly is a matedCS? Is that the location in the world coordinate system of the mate connector's origin?
-
What is the transform field in the occurrence field when I query the assembly API doing?
What is the transform field in the occurrence field when I query the assembly API doing? The transformation matrix is exerted on which matrix I can query from? Are there anyways that I can see the location of the mate connector in the coordinate system that can tell me in what ways are the parts or subassemblies are…
-
Unexpected imperfection (crease) in a lofted surface
I have used profiles with the same number of segments. My loft came mostly as I expected, but in the last part of the loft there is weird imperfection. I cant identify what is causing it. Any ideas or suggestions? link to my part studio:…
-
Thread specific notification settings
Is there any way to set notification settings on a thread by thread basis? I prefer to receive notifications in general, but I don't necessarily want an email every time someone comments on a popular thread I've participated in.
-
Is there a way to get the sheet metal thickness after it has been finished
Is there a way to get the sheet metal thickness after it has been finished? (This is for a forming featurescript I've made)
-
How do I get an angle?
How do I measure an angle between two faces on different parts in FeatureScript?
-
Inconsistent spline escape behavior.
This discussion was created from comments split from: Learning Center Support.
-
How do I correct holes that are on the wrong axis?
Thanks to some previous help here, I have managed to cut some holes using the hole tool but depending on the orientation of the part the holes end up incorrectly positioned. Not actually an issue currently as I will always work in one plane but I would love to make the feature universal for future proofing. Correct holes:…
-
Fill does not fill to the edge?
Hi Guys, i'm trying to create a surface mainly by creating 3d splines and filling the enclosed surface. This works, but i noticed that the surface does not exactly follow the edges, in some places it comes up short and in some places it crosses outside the edges Is this normal? Will it cause a problem down the line,and do…
-
How to add a size & note type?
This discussion was created from comments split from: Improvements to Onshape - January 2nd, 2018.