Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:
- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Onshape Forums
Discussion List
-
Quiz Grade Viewing
How can I check the grade they earned on the quiz that the students in my class that I created? I have assigned them the coursework in CAD Basics, and each section has a quiz embedded into the lesson.
-
Featurescript: Square Sweep
I modified Konstantin S's circle sweep document for my own personal use because I needed a square version for some of my builds and I couldn't find a feature script that did that; I'm posting it here just so anyone else can also benefit from this. I'm currently in highschool and am fairly new to feature script so please…
-
Why is it not possible to "Derive" a part from "Standard content"?
Is this an oversight, or is there a good reason why data in the library from "Standard content" cannot be derived into a Part Studio? Note: When a part is imported from an external supplier via an Onshape App its geometry can be modified and it can be derived.
-
Possible to rename a part included in an assembly?
The scenario: I've included 4 references to a wheel part in my assembly and I'd like to give each a meaningful name: front_left, front_right, etc. I don't see the option to "rename" an instance the popup menu. Is this not possible? Thank you.
-
Sweeping a profile around body while keeping profile normal and tangent to face of body?
I can usually figure this stuff out but this one has me stumped. I have a revolved body (a spindle of sorts) and I'm trying to cut a V-notch the length of the spindle, while that notch rotates 3/4 away around the body. I've tried several ways, but none of the ways seem to get me what I need. I've looked around the forums…
-
Routing curve, how to wrap around control points instead of cutting the corner
I want to model a thin control cable from a servo that routes through pulley, bellcranks, etc. So I'm using polyline with control points that are the mate connectors of the pulleys, and then setting the radius to whatever the pulley radius would be. BUT, the radius cuts the corner. Is there a setting to make the curve go…
-
Mate overdefines the assembly
I am trying to make it so that the three steps are connected to the two beams either side with revolute mates. This way if one of the steps is rotated the other two rotate with it. But when I go to do the very last revolute mate it says that it overdefines the assembly. Whats going wrong?…
-
How can i blend 2 faces with the external face of a cilinder?
https://cad.onshape.com/documents/bdbed0ff7b794d5aef889845/w/5f2c82116d906019ed79fd64/e/9a69aa53a608f3abaabc9da7?renderMode=0&uiState=6930759086e638f6e59d077b In this project, I'm trying to blend the bottom and right face of part 1 with the face of part 2, limiting the blend to the main cylindrical body of part 2. I don't…
-
i need help with making dice
i am making a set of dnd dice for fun and cant figure out how I should make a 8,10.12, and 20 sided dice. I have them inside a sphere with a weighted ball. help?
-
Does anyone know how to do this?
I'm trying to create a circle with "waves" extruding from it, the top model is what it should look like if the circle was stretched out into a line. I can get the general shape of it, but the inside and outside of the low-valleys have different heights and i do not know how to solve it. I tried using separate planes,…
-
Hello everyone, I am trying to create a feature script that let me select a plane and put a sketch
Hello everyone, I am trying to create a feature script that let me select a plane and put this sketch. This is what I have so far but it still creates an error. FeatureScript 2815; import(path : "onshape/std/geometry.fs", version : "2815.0"); annotation { "Feature Type Name" : "Rail Profile" } export const railProfile =…
-
Error while using an imported CSV Sheet
Hey Guys, I wanted to use the automatic wire routing custom feature in onshape for the first time in a project. I did the CSV file manually (not exported from somewhere) in Excel and exported it as CSV file. Then I imported it into Onshape without any problems. But after creating a part studio in context (inside an…
-
BOM is not localized in drawings
I have set the language to german in the account settings and the onshape UI is localized. When I create a BOM in an assembly I see the BOM table header with german titles as expected: When the BOM is inserted in a drawing the table header is not localized and appears in english: Is there any setting I am missing here?…
-
Line color in sketch
I do line layouts in sketch mode to identify locations of parts or paths of motion. Has any thought been to having a "layout mode" that allows changing of line colors?
-
Soporte para diseño
Hola, hace tiempo que utilizo onshape para diseñar piezas de mis aeromodelos. Estoy construyendo una maqueta a escala 1:8 del Grumman Duck, avión emblemático de la 2a Guerra Mundial. Tengo dificultades serias para poder completar el diseño de los flotadores del avión. Adjunto imágenes del plano y del aspecto real de los…
-
Struggling to convert mesh into solid
Hi all, I have simplified a mesh to a small part, but I still can seem to create a solid to match the mesh. Any help would be greatly appreciated. Thanks. Here is a link to my file: https://cad.onshape.com/documents/7cb1bfd00328e61f35e83a83/w/849815842fd14a0862c686a3/e/eb535e14df4bd7e60c66229e
-
How to use a config variable to make more config variables?
Im making a 3d printed screw sorter. A screw sits on a disc and is rotated by a spinning head, until the end of the screw tips into the right sized hole and falls into a bin below. I want to be able to configure both the number of bins and the screw length of each hole. So I want the user to be able to first use a config…
-
Projects for Teachers in the Learning Center
In the Learning Center, under Educator Resources, you'll now find a category called Projects. These are full projects to inspire teachers and excite students. Each project includes learning objectives and sample Onshape documents, along with additional recommendations for pacing, extensions, and more. Check them out.…
-
How to remove overlapping sketch lines and sketch to dxf producing multiple layers
I'm creating a design for laser cutting fabrication. I'm usually exporting a surface face to DXF, which works great. For a certain cut, I wanted to use a sketch, as it efficiently produces the dxf to cut multiple faces together that aren't on a shared face, but a shared sketch. I found that the dxf file had two layers,…
-
Stuck with how to approach offset part - Connect two
Hello! I hope you all are doing well! I really hate to ask this, but I've run into a snag. Reviewed some tutorials on loft, revolve, bridging curve + fill + enclose. But i cannot get anything to work. I've tried various sketches to no avail. Below is a snapshot of the part i am working on, and a photo of the actual part i…
-
Loft did not generate properly: Current selections would create a self-intersecting body
Hello, Long time user, first time posting. First off thanks to this community, this forum has helped answer a lot of questions over the years! I'm trying to loft between two profiles. I have guide curves that (I believe) intersect the profiles and are not tangent to the profiles. I've also tried adding connection points…
-
How to 'edit' or view student submissions with suppress on
The short version is that there's an assignment that has students insert a cam into a premade assembly and use the tangent mate to make the cam move a follower shaft up and down. With how it currently is, they both get sent to the middle of the axle that it's turning on. For convenience sake I told them to supress one cam…
-
Custom Feature: Rib Network
This custom feature creates a network of planar ribs based on one or more sketches with full control of draft and fillets. It's actually a few years old, but I've dusted it off, fixed a ton of bugs and published it. Enjoy! https://cad.onshape.com/documents/67de1cda4399707a3649fcdf This was created from one sketch:
-
Passing a variable from Part Studio A to Part Studio B
Hi, I am wondering if there was a way to pass a variable from a Part Studio to another one in the same document, at least passing only its value... I would expect that a Derive would work, but nope. P.S. Variable can have a few different meanings in Onshape, The one I am questionning here is the one that appears as an (x)…
-
New Custom Feature: EZ Wire
I'm still playing with the UI and logic rules, but basically it's a way to quickly route wire/pipe/cable when exact positioning isn't critical (like for our robots, when we need a basic path). The example below shows a path that would require 7 points in RoutingCurve, but mine does it with just 3 MC positions.…
-
Issues about the feature scrip to generate a parametric curve
Hello, I'm an amateur designer using the Onshape platform with very good results so far, I must admit. However, I've recently run into a problem I can't solve. I'm trying to generate an involute profile, and when I load the data, I get an error message. To explain, when I write the equations for X and Y, I get the error…
-
Feature script extrude offset issue
Hi, I would like to know how I can make an extrude with an offset within a feature script. The link below points to an example project with a failed offset extrude. The parameter "hasOffset" is set to true and the "offsetDistance" is set to 5 * millimeter. The feature script generates without error but also without offset.…
-
Icons on param groups?
I don't think this is currently possible, but want to be wrong. Anyone know if we can add icons for collapsable groups? The Hole feature gets close, but the native icon implementation isn't done via FS imports.
-
How to make this camshaft push the valves?
Hi all, I have been designing an engine in onshape and recently I have reached the cylinder head section. I have made a camshaft and valves but cannot get the camshaft to push the vales properly. I have looked online for help already and have tried using a tangent mate, but it just won't rotate the entire way around. I…
-
Extrusion isn't working.
Hi, so when I try to remove some material the top says "selected tools and targets do not intersect" I don't know what this means, can anyone help explain this to me?
Categories
Popular Tags
- featurescript 890
- drawings 614
- assembly 444
- sketch 429
- assemblies 379
- improvements 358
- help 331
- part studio 322
- configurations 307
- feature script 301
- Sheet Metal 296
- drawing 254
- how to 250
- feature request 242
- mate connectors 235
- loft 216
- export 209
- api 200
- dimensions 199
- extrude 196
- sketching 195
- voting 187
- variables 180
- improvement requests 174
- mates 162