Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:
- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Onshape Forums
Discussion List
-
circles
i want to create a 9 foot tunnel 20 foot circle. like a recirculating loop. i cannot find the tools bar for such design
-
Loft "all guides should intersect with profile boundary
I am designing a boat hull, it has a smooth curve (created with a spline) at the bottom and a sharp corner at the top. I want to loft between the 3 faces i have created but the two upper line to not intersect with the opposite far side, is there a way to resolve this? as you can see some funky geometry going on at the top…
-
shell tool on complicated part
Hi all! i am trying to use the shell tool on this boat hull with no luck, i have changed the thickness etc. https://cad.onshape.com/documents/d4515d6419f167e22e28ec5b/w/144911c0572a9cdbe7919d76/e/3dfe099029f75709361ffd35?renderMode=0&uiState=692738511afc3a740847730f Any help would be greatly appreciated. Thank you 😀
-
What is the best way to join these lofted surfaces?
Going kinda crazy trying to figure out the loft feature here.
-
Circle Tangent & Coincident with Spline Issues
I am trying to create a dynamic equation driven gear from the tutorial below, and at about 14:40 he tries to connect 2 circles to a pair of symmetrical (mirrored) splines by making them coincident at 2 points and also tangent to the splines themselves. In his video in which he is using Solidworks, the two circles are the…
-
Is there a way to print a pdf that's been inserted into a Publication?
There doesn't seem to be a means to print a pdf or .dwg directly from a Publication. I see the pdf can potentially be downloaded, but printing directly would be a better option for our workflow.
-
Make a Simple Sheet Metal Box with Flanges
I'm lost on how to get the flange to meet or at least come close to perpendicular wall. https://cad.onshape.com/documents/a06e51a396299611fc85368b/w/d7213e7937d6c4f60d66e3db/e/a785adeb3ec4f767493dc68f Also, I am unable to find any examples using the "up to entity" or "up to entity with offset" selections. Thanks, Steve.
-
How to Make a Plane Tangent to a Point on the Surface of a Ball
It's not actually a ball, but I believe this is the same problem. I'm just trying to drill straight into a curve, and/or to make a plane tangent to the curve in the process. None of the plane types seem to work. (Selecting the curve and a point on it just stays red for "Tangent Plane". Point Normal comes out unrelated to…
-
New FeatureScript: Crush Ribs — Parametric Press-Fit Ribs for Cylindrical Holes
Hi everyone, I’ve been taking my first real steps in proper 3D modeling (I came from Tinkercad, so this was a big jump for me 😅), and I wanted to share something useful that came out of that learning process. I wrote a FeatureScript called Crush Ribs — a fully parametric tool for generating wedge-shaped crush ribs inside…
-
trying to get length of cylinder face.
I'm creating a tool in which I need to get the dimensions of a cylindrical face. So far, after about 6 hours, I got this working to get the radius: var cyl is Query = qGeometry(definition.refChoice, GeometryType.CYLINDER); var face = qEntityFilter(cyl, EntityType.FACE); var cyl_props = evSurfaceDefinition(context, {"face":…
-
Can't edit hatch pattern
Trying to edit a hatch pattern in a section view. Onshape help says; "To edit a hatch region after it is applied, select it, then right-click and select Edit hatch. This opens the hatch dialog where the hatch can be edited.", but when I do this I get a small dialog that looks nothing like the hatch dialog and has no…
-
how to open library in the onshape website??????
how to open library in the onshape website??????
-
how can i bend a sheet metal?
I am new on onshape, i drew a sheet metal, did the thicken to 1/16 inch, got rid of the corners to make a cover with four bends. I have been trying to bend it for four hours, i see people bending the same piece like nothing, what i am doing wrong? please help.
-
Bending a wire mesh sheet
I have created a configurable (welded square) mesh sheet, configurable by width, depth, wire gauge and wire pitch. My sheet is e.g. 600x600 mm, wire 1.4mm, wire pitch 25 mm. I now want to bend the sheet, not reconstruct, but bend it along a crossing axis. Can this be done in Onshape? I need to create various parts of…
-
Help with correcting my fs please
Can someone please assist in helping me correct my fs code. FeatureScript 2815; import(path : "onshape/std/common.fs", version : "2815.0"); import(path : "onshape/std/table.fs", version : "2815.0"); annotation { "Feature Type Name" : "Custom Part Table from Config Table" } export const customPartTable =…
-
Dual Dimensions in part studio and measure tool?
As far as I can tell there is no option for dual dimensions in the part studio sketches or within the measure tool. While searching for this function I found a forum post stating that onshape is working on it, and even a improvement request that was marked complete in 2021. However I cannot find dual dimensions in anything…
-
How do I remove all these (Faces?) from imported models
I'm still kind of new to Onshape, please help me fix this.
-
Möchte mit einer Konstruktion beginnen
Bin ganz neu und angemeldet, finde aber nicht den Weg mit dem Zeichnen zu beginnen. Ich komme nicht auf die Konstruktionsebene, die in den Videos angezeigt wir. Was muss ich tun?
-
Help With PCB Tutorial - Instructions Not Producing Same Results
I'm trying to do "Exercise: Creating a PCB Board" from section 3 of the tutorial. I am not getting results that match what is shown. I've gone through each step multiple times and tried to verify every tiny detail, but I can't find what is different. I continue to end up with a PCB Studio that reports 0 components and 2…
-
3d nest nesting CNC CAM
What is the state of nesting in Onshape? e.g. Take 100 plus part model and arrange it on individual sheets for 3 axis CNC milling. See screenshot. Can Onshape do this?
-
In learning centre and starting a drawing
How do I open a browsing window so I can draw alongside the tutoring
-
Newbie question - Wavy scarf on snowman
Hi, I want to achieve two things with the scarf on the snowman I want it to be more wavy and I want the scarf to go through the white material in order to avoid so many color changes when printing it Help appreciated…
-
How to Create a Surface with Gap in OnShape?
So I have this boundary with three sets of airfoils inside them and I am trying to create a surface wherein this entire boundary acts as the domain and these three airfoils remain as the gap. I have to export this surface to Ansys later on for CFD analysis of these three airfoils so I am having an issue using the Fill…
-
How to make a separate sketch for each layer from an imported dxf?
Hi There, I am working with some imported geometry and it would be very convenient if I don't have import each layer separately. Is there an automation to make separate sketches for each DXF layer? See attached sample DXF link.…
-
Why won't my parts union?
I'm trying to combine these two parts using boolean:union but it's giving errors at this point. Before this error, it was giving errors where the edges of the light blue part is so I extruded those edges 1-2mm as I assumed the problem was a lack of overlap and that fixed the error, but this isn't resolving with the same…
-
Showing part names in the instance list
Hi, Still a newbie! In an assembly it would be useful to see the name of the parts in the instance list. At the moment all I see is Part 1 <9>, Part 1 <10>, etc when it would be useful to see the actual name I gave it in the part (i.e. the names I see in the tabs along the bottom). Any help to get on how to display the…
-
download public model
I would like to use the API to download public models from Onshape for research purposes. What is the proper procedure for doing this, and whom should I contact to ensure that I can access and download the data legally and without issues?
-
Mouse Control: constrained orbit - rotate about scene floor
We making furniture and room layouts. We are 100% in constrained orbit. Would Onshape ever add a feature to enable a constrained orbit - rotate about scene floor instead of Alt + mouse click?
-
Cannot seem to get Boolean Union to work...
Total newbie here… I need to export this as a "single-body" STEP file for 3D printing. I've tried everything I can come up with/find via initial search to do this, either by using the Boolean tool or Composite Part, but nothing seems to do the trick. What am I missing?
-
Newbie-ish question: How to use a selection of lines from a solid in a sketch?
I have created this 3D shape, and would like to use it as the basis for another. The screenshot shows the edges I'm interested in. I'd like to start with an extrusion of that outline (without the holes and slots). I suspect there is a way of doing this, but I can't see how to start, so any suggestions will be hugely…
Categories
Popular Tags
- featurescript 890
- drawings 614
- assembly 444
- sketch 429
- assemblies 379
- improvements 358
- help 331
- part studio 322
- configurations 307
- feature script 301
- Sheet Metal 296
- drawing 254
- how to 250
- feature request 242
- mate connectors 235
- loft 216
- export 209
- api 200
- dimensions 199
- extrude 196
- sketching 195
- voting 187
- variables 180
- improvement requests 174
- mates 162