Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:
- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Onshape Forums
Discussion List
-
Add a section view to a drawing with a break view
I am trying to make a drawing for an extruded part that is over 10 ft long. It has holes drilled at regular intervals along it's length. Obviously a part like this required a break view to show the extrusion length and hole locations. I would like to have the extrusion profile shown with a section view so it can include…
-
Right mouse buton - Drag to rotate the view won't release!
So the title says it all. When trying to pan around using right mouse button, I release the button but the panning/rotating won't stop! I press escape, spacebar, whatever it just won't release. It ends up taking pressing escape several times, pressing various mouse buttons several times, etc. It's EXTREMELY frustrating.…
-
How do I get the internal fold marks of a multi-sided shape to show up in the exported flattened DXF
For example if I export the above flattened lofted object only the outline shows up in the DXF even though the lines are there before exporting.
- I was wondering if there is a way to make an oval drawing? I need a flat oval shape.
-
In Part Studio: How to place one part on the surface of another and merge them via extrusion?
Hello, I have the following issue: In my Part Studio there are two parts (Part1 & Part2). I want to somehow place Part2 (right) on the surface of Part1 (left) without warping either one but I can't figure out how to do it. I've done the same thing in Blender to illustrate what I want to do: In onshape it looks like this…
-
Get multiple vertices from a query
How would I go about getting multiple vertices from a query? I have a parameter that creates a query of 3 points. I am attempting to make a plane using the 3 points. Here is what I have so far: annotation {"Name" : "Points", "Filter" : (EntityType.VERTEX), "MaxNumberOfPicks" : 3} definition.points is Query; var points =…
-
Splices
Hi All, Has anyone managed a work around to create wire splices. Where say 3 wires from the left are crimped with one from the right? It can not be like two connectors as the splice has one refrence
-
Query filter MeshGeometry.YES not working
I want to filter a query param for only mesh vertices. Here's what I have: annotation { "Name" : "Mesh verticies", "Filter" : EntityType.VERTEX && AllowMeshGeometry.YES && MeshGeometry.YES } definition.points is Query; But it's highlighting MeshGeometry.YES with the message "Unhandled enum type MeshGeometry". I get this…
-
How to use loft tool to combine 2 imported objects with dissimilar geometry
Hi there, new to CAD, new to Onschape, first ever project and very first question: I imported 2 objects that are somehow round'ish and that i want to combine with solid through the loft tool (after doing research i learned that that is what i'm imagining here). I created 2 planes touching the surfaces of the objects that…
-
showing thread in a tapped hole now!
Ok I might have missed this but is this a new feature where it now shows the thread inside a tapped hole? I don't think I ever saw this before.
-
Issues with loft function
Hello, I’m quite new to Onshape, and I’m having some issues with the loft function. I’m trying to create a propeller blade (3 cm wide) and add a twist to it. I’ve made curves that the profile should follow, and I used airfoil generators to create the NACA profile. However, whenever I try to use the loft tool to make the…
-
purpose of setting the origin or chosing a new defined mate in a context design?
So I use "in context design" a lot and it is a very powerful way to design something that works together with other parts. I have noticed that nothing much changes when you choose the origin or when you make a self defined mate as origin for your in context design. I followed the "in context design" course till about 50%…
-
Putting countersunk holes on a wrapped part around a cyclinder
I have a cylindrical piece that I want to add a lens (which will have an LED strip in the lens). I want to use countersunk screws to attach the lens to the cylinder body. 1. How do I create countersunk holes on the Lens (in grey) 2. How do I extend the holes into the body (in blue) who they will be tapped when I 3d print…
-
Spline constraints
I'm looking to constrain splines within a drawing. I can't work out how to constrain the direction/length of the spline handle... Any tips? Also, it appears that there are no spline handles for points except for the start and end points. Is that really true? How do I manipulate the length/angle of a curve within the…
-
is it possible deactivate a thread so you will not be notified?
Ok so this is not about the workings of the cad but the forums. Is it possible to unsubscribe from one thread that has been resolved or has an answer assigned, so I am not notified anymore? I can unsubscribe from notifications of course, but the choices I have I think are about all the notifications, not thread related. if…
- Sweep along split line
-
Plane at line angle - angle changes
Hi, I have a plane at line angle where the plane angle changes depending on the angle of the line it is referenced to. I'm sure it's something I'm misunderstanding. An example is below: Any help appreciated. Thank you.
-
How can you wrap/ project a pattern onto an irregular lofted surface? Is it possible?
I have a model that I created with a loft and have it both has a solid and a surface. I am trying to wrap a pattern/text around it to give it some character. I know wraps only work with cylindrical surfaces, so how do I add texture to this surface? Can this be done in Onshape, or should I use something like Blender/ZBrush?
-
Onspace workspaces / documents look corrupted / unusable (only some element remain)- setting or bug?
Hi! With several projects now I have the issue that at a seemingly random moment while editing, the whole workspace becomes blank only showing the main axes several curves (correction: in this case these are not the main axes but rather several curves I have added to the sketch to make a axis system centered on my object u…
-
Issues with Transforming imported Model
Something I've been really struggling with is when importing a model getting the part oriented the way I want it once I import it, I've had some success if there are certain features on some parts that I can rotate about. I've looked up some of the tutorials on how to do it to no avail. Wondering if someone can hop on with…
-
3D printing - Where do I start?
I've made a part to be 3D printed, however I don't know if I need to change the infil now (in the design studio in onshape) or later. once that's done then what file type do i export it as (I'm using a Creality ender 3 pro 3D printer) Any kind of help would be much appreciated. Here's a picture of the thing I'm printing…
-
How to keep different parts, based on different sizes in a sketch?
I would like to start with a design and from a common base design to branch into different parts. Here is a link for very simple part(s) that come from a common attachment point and then branch into different parts.…
-
Using Clips In Wiring
Hi All, We are routing a harness, lots of wires etc. So we guess the quickest way would be using clips (Firtree made as a clip) then route a wire through it and then other wires follow the first etc. We have created the clip etc but struggling to work out how to place it in the part studio of the harness etc. is there a…
-
How to cut a big part into printable smaller parts
Hi, so I have this "frame" (1230mm x 1085mm), which is way to big to be 3D printed at once. What is the best way to cut it in printable parts with some kind of dovetails to assamble it later on?…
-
Student inlog
Hi, Some of my 40 students (age 14) were not able to create an account last fall. I am not sure why. Can you possibly see if they did something wrong? For example fransis.neby@elevmail.stockholm.se linus.2.sjostrom@elevmail.stockholm.se Most of my students succeeded, for example olivia.noori@elevmail.stockholm.se and…
-
Please help me loft 3 sketches
Hi guys, I'm trying to design a fan duct and I'm having some difficulties trying to loft 3 different sketches together. Can someone please help me? I've included a video demonstrating what I'm trying to achieve and here's a link to the design:…
-
help turning imported STL surface mesh into solid part
Hi everyone, I have a bit of a problem. I built a boat using a ship design programme for a project at university. Now I want to continue using it and convert the hull into a boat to use as an RC boat. Is there a way to get such a STL mesh into a part? I'm a bit out of my depth with my skills so if anyone can help that…
-
assembly degrees of freedom
Hello, found this older post with no conclusive answer. assembly degrees of freedom — Onshape I have a lot of (quite complex) assemblies with mates relative to a (virtual) origin point and the position of parts is depending of the mates of several other parts (mimicking the actual degrees of freedom in the real assembly)…
-
how to query for all vertexes in a mesh
how to query for all vertexes in a mesh
-
how to create a Torodial Helix on a Pretzel
Hello everyone I have this pretzel shape and I need to cut the outer surface of it into a coil shape so that I can wind a flat copper wire 5mm wide and 0.25mm thick Total 22 windings required I can't find a way to make this coil and cut the pretzel to complete the task…
Categories
Popular Tags
- featurescript 890
- drawings 614
- assembly 444
- sketch 429
- assemblies 379
- improvements 358
- help 331
- part studio 322
- configurations 307
- feature script 301
- Sheet Metal 296
- drawing 254
- how to 250
- feature request 242
- mate connectors 235
- loft 216
- export 209
- api 200
- dimensions 199
- extrude 196
- sketching 195
- voting 187
- variables 180
- improvement requests 174
- mates 162