Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:
- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Onshape Forums
Discussion List
-
How to define a sketch plane which is not standard plane in the beginning
problem: I have a side view to define the side shape of my part, on top I can define a profile with the top view sketch. Now I need a sketch to define the profile on the bottom of the part I want to create. For this reason, the sketch plane has to move to the bottom line of my side view sketch. Unfortunally, this line is…
-
3D Print Strings Badminton racket keychain
I'm trying to 3d print a mini Badminton keychain. How am I supposed to create these strings in the racket in onshape?
-
cannot move sketch
If I select the sketch in the sidebar, I do not find any way to move the sketch.If I clicknear the sketch, a orange colored rectangle is opened depending to moves of my mouse. The same happens when I try to catch the Centerpoint of the sketch. If I try to select the geometry, it changes color to orange but I cannot move…
- The audio in one of the lessons disappeared and I can't seem to figure out how to get it back
-
Is it possible to search the public documents by Owner?
Title says it all. I see owner listed, but I cannot see a way to search by owner.
-
New Sketch Function: Hershey Text
Link to Hershey Text I have seen a few improvement requests related to adding single line fonts for CNC engraving. After some research I found these 31 single line or "Hershey Fonts" available online here, and an explanation on how to decode them. I converted the data into a CSV for FeatureScript to interpret and tried to…
-
First attempt at Analysis - need help
My first play with the Analysis feature of OnShape. I have a simple structure which is a composite beam consisting of two elements (upper and lower) having different properties, fastened together with bolts. The load is applied to the lower element, but only the upper element is supported at each end. I am ultimately…
-
Featurescript selection of In-Context entities from an assembly
Prologue: This is a long one, but I feel like the background of my thought process will be helpful communicating my question and I'm hoping that someone here can help me wrap my head around how in-context works. Inciting Problem: My goal was to make a featurescript that evaluates using a query that automatically includes…
-
Regeneration Error while using an imported CSV Sheet
Hi I am new to using the custom feature for wiring created in OnShape. I have been stumped because I am unsure what I am doing wrong. Importing the CSV that I made from Excel works fine, but I keep getting the regeneration error when I try to import Wire Data into the Part Studio. I have already created a Variable Studio…
-
Improvements to Onshape - August 7, 2026
This update introduces a host of new productivity enhancements to better streamline your experience in Onshape. CAD Persistent Center of Mass for Part Studio & Drawings Users can now make the center of mass persistently visible for any part in a Part studio allowing for independent and permanent visibility. This feature…
-
Highlight elements while editing without regeneration impact
I'd like to be able to highlight geometry for user reference while they're editing a FeatureScript but without impacting the overall regeneration performance. The closest way I know of doing this is with debug(), but that adds ~1ms regeneration per face or vector and ~6ms per direction even during normal part regeneration…
-
cylindrical and parallel mate conflict
Hey Guys, I have encountered a problem, where I have the inner part of the bearing connected to a rod via cylindrical mate and the outer part of the bearing, to be more specific the plane area with the bore holes, must be parallel to the marked side of the servomotor, no planar mate. In theory this connection must work,…
-
Having issues with making jigs using boolean and hollow parts
Hi, I’m currently working on creating various jigs for parts that we manufacture. This works well for solid parts using Boolean operations, but I would like to achieve the same result with hollow parts, as shown in the picture. Is there a way to create only the imprint of the outer or inner surface of a hollow part, rather…
-
How's AI for feature scripts working for you?
I am trying to use Gemini for feature script creation and it has not been awesome. I have tried up to 5 iterations where I feed OnShape errors back into Gemini to fix, and not been successful. Someone told me he had to run 40 iterations! Is this other people's experience? How many debug iterations do you run?
-
BSPP and NPT Threads in Hole callout
Would anyone know when we can expect further functionality within the hole feature to include BSPP BSPT and NPT threads?
-
I have made a drawing and need to add a couple of bends to it
This is the first drawing I have attempted and cannot figure out how to add two bends to it. I've tried some of the tutorials and something is just not clicking.
-
Sketch plane axis orientation
I am currently working on this part. The idea that I'm trying to make work is for the end of the gray part to be parallel to the face of the blue part as the angle of the blue part changes. I made a plane parallel to the blue part's face and drew the sketch on it. It looked good until the angle rotated past 135 degrees.…
-
Company wide labels
Is it possible to add labels to documents for the whole company? We would like to label them as "To Quote", "Active Quote", etc. and have them searchable by all.
-
Extrude
Hello the all knowing onshape forums.. I've been trying everything I know and I still encounter this error, even after pouring through many past forums. I have this sketch of a partial Welsh dragon which is going to be included in my project, however when I attempt to extrude it, it states 'Extrude 1 did not regenerate…
-
Wie kann ich ein Objekt duplizieren um es unter einem anderen Namen abzulegen.
Ich habe mir ein Objekt erstellt welches ich unter einem anderen Namen ablegen möchte, damit ich Änderungen entgegen des ersten Objektes erstellen kann, ohne dass das erste Objekt geändert wird. Wie gelingt mir das? Vielen Dank für die Antworten
-
Displaying calculated values in the user interface
Hi I just finished the featurescript fundamentals tutorial and are trying to make my first feature by myself, which is a gear generator. I want to display some calculated values in the user interface where the user enters the input parameters to help them select the input parameters. To be a little more concrete, there's a…
-
Removing model lines from a part?
Is there any way to remove these lines from my part? Its the product of two swept areas and an extrude between. Loft did not seem to want to work! Is there a way I can just clean up the appearance of the part so the stretched 'H' in the middle of the button is gone? Thanks!
-
Any efficient ways to make a cutlist from a cabinet drawing?
Im trying to guage the possibilities of using OnShape for woodworking. One of the functions im missing is the ability to select all my parts, and put the dimensions in a list or a table. Is there any featurescripts that can do this? I've seen the "frame" workflow, but that seems very inconvenient when you've allready drawn…
-
How do I make tabs for a piece that needs to be split?
I need to make a piece for a staircase I'm working on split but have a tab in it so that it assembles perfectly once it comes back from the plasma cutter. How do I go about splitting an already extruded part like a puzzle piece to do that. I am familiar with splitting a part via a plane but that gives me a flat surface for…
-
New Custom Feature - HoleTag
I posted about this as a response some time ago, but just reworked it. HoleTag slightly modifies hole diameters (in increments of 0.00016mm) so that you can choose whole bodies when using Replicate and parts will only mate to holes that have been tagged appropriately. By importing an editable variable studio to the…
-
In FS dialog annotations UIHint-opt "show_expression" seems not to work, or is my syntax wrong?
I use ... annotation{"Name" : "Size ", "UIHint" : "SHOW_EXPRESSION"} isLength(definition.X, ...); ... But at runtime, if i bind this parameter to a variable by inputting #test, a variable defined before, into the field of this parameter, after leaving this field, there is always shown the evaluated value of #test, for…
-
unwrap or flatten a 3d curve to use in a sketch
I am trying to take the edge of a surface, happens to be one propeller blade surface (pressure face) that i have split at a certain radius. I need to use the flattened curve…or profile of that surface in a sketch to create the profile of the 2nd blade surface (suction face) at that radius the then wrap back onto the radius…
-
Wrap text around outside of cylinder evenly
I'm sure I'm missing something easy, but I just need to wrap the numbers 0-9 around the outside of a cylinder to make a rotating counter. I know I can use the wrap tool, but the text manipulation abilities seem frankly abysmal from what I can tell. I can't rotate the numbers vertically as a group, nor can I make a circular…
-
High school tech ed cad
I have been recently assigned a high school level tech ed class cad, they used to use solid works, I have middle school experience with onshape. does anyone have a good semester cad map for guidance for me to get this class going? Kmattia@suffield.org i Will build off my middle school work unless someone has some content…
-
Ways to Have Certain Areas Where There is Stress to be Reinforced
So far I have made just simple shapes and the object was simply to make the shape. The walls were pretty thin and the infill was mainly hollow. I want to make to parts that will be bolted together on a tubular frame. It will have someting inside with some weight. I'd like to reinforce the areas where the nuts and bolts…
Categories
Popular Tags
- featurescript 890
- drawings 614
- assembly 444
- sketch 429
- assemblies 379
- improvements 358
- help 331
- part studio 322
- configurations 307
- feature script 301
- Sheet Metal 296
- drawing 254
- how to 250
- feature request 242
- mate connectors 235
- loft 216
- export 209
- api 200
- dimensions 199
- extrude 196
- sketching 195
- voting 187
- variables 180
- improvement requests 174
- mates 162