Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:
- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Onshape Forums
Discussion List
-
How to replicate sketch/extrusion across faces of extrusions from circular pattern?
Hi there, in the document below I am designing a cable cover for ceiling cables. The cover will clamp to the inside of the ceiling cable hole with three pins. To get the tension for the clamping I want to add some small extrusion to the pins inserted into the hole. The pins themselves are extruded from a circular pattern…
-
How to sweep over a cylindrical face along a projected curve instead of a helix
I am new to Onshape and to CAD design in general. I am trying to design a gear with its teeth swept along a curve I have projected on a cylindrical surface. This works fine when I use a helix, but it won't generate properly, or at al similarly, when I select a projected curve on the same surface in place of the helix. Is…
-
qCreatedBy(sketch_id, EntityType.EDGE) returns more edges than I drew
I drew a sketch with 11 edges, but qCreatedBy(sketch_id, EntityType.EDGE) returned 24 edges, and I parsed these edges and found that some of them were overlapping (all parameters were the same, except for deterministicId). Why is this happening? What are these "copied edges" used for?
-
Improvements to Onshape - December 13th, 2024
This is the last update for 2024, but we'll be back with a bang in 2025! On behalf of PTC and the entire Onshape team, I would like to wish all our users everywhere an enjoyable and relaxing holiday season. PART STUDIOS CURVE APPROXIMATION The approximation toolset from the Edit curve feature is now available in other…
-
Assembly importing issues
I have been trying to import three parts into an Assembly. Two from one Part studio and one from another. Only one part from the first part studio is importing correctly and reflecting the part, two others are not. One is coming in distorted the other although only one part comes through as 2 parts and not properly…
-
Hey FeatureScripters - What would you like to see in an advanced FeatureScript tutorial?
Hey everyone, I'm Josh, one of the Part Studio developers. Recently I decided the community could use a more advanced tutorial to cover some of the trickier topics in FeatureScript: Queries, ids, transient ids, robust queries, tracking queries, etc. We could also cover common problems, gotchas, tips n' tricks, that sort of…
-
3D Fibonacci Golden Ratio Spiral
Hello Community, i'm new to Onshape, i'm a 3Dsmax user but it need accuracy and differents tools for my project so i will give a try to onshape. I love it so far. My challenge has to do with the Maths, im asking Chatgpt but i still have difficulties to translate the answer to my project. Here i an image of what i have done…
-
Can I make my feature error out if the tools and targets do not intersect for a boolean subtract?
I basically want this message to be generated as well as my feature to error out if the boolean subtract does not create a change in geometry. Here is what I have so far, but I am not sure if this is the right way to go about it. The standard boolean feature will show this error message but still complete (no red in the…
-
how can i bend object?
how can i bend blue object to match black pillar please? i am complete beginner ^^
-
Want to do gradual curves on side steps matching with top surface . Can you help me to do this ?
https://cad.onshape.com/documents/792100c942101b6c7c46d48a/w/d844d9667afc5411a44b84d5/e/8e8b5a15d3dff1499fee82fe?renderMode=0&uiState=677628c449aa03480361671a
-
Extrude from a crossection
Hi, New to this forum and I hope someone can help. I have a design of an enclosure for electronics. It consist of a bottom part and a lid. The lid has a flange to fit onto the bottom part, side walls and a top cover. I need to make the lid taller to house some more components.. I could create a plane with the cross-section…
-
Sketch Could not be solved - simple rectangles and lines.
Hello all, I`m still very much learning but my normally very simple drawings always tend to work out ok. However, I have hit and error and have tried to redraw this in a few different ways with the same issue. It is essentially a simple container I want to use to store my taps and dies but it is just for fun and really…
-
Tracing boundary of imported part
Hi. I want to trace a more perfect boundary of the interior of this design, part 8 in the parts list. https://cad.onshape.com/documents/c4f12b8b1bb3910a20df264f/w/940f45ea321dd1563b378096/e/dd0edd20019d314505b539a9 To look like this: But keep a constant distance from the edge. I want to use this as a lid to a box. I've…
-
Fixing Broken Part Through FeatureScript
I was finishing up a model cable protector earlier today, when a new fillet I created caused the Part Studio to completely fail. I can't open or edit the Part Studio. If I could just delete the last fillet I made I would be set, but I can't. I was wondering if there is a way for me to recover my work, potentially by taking…
-
Shed assembly with configurable walls (frames) - how to create a BOM with lengths
Imagine: A shed has four walls with timber frames. We need to create a BOM with all timber (90x45mm section) x length(!) The obvious design is creating the walls using centre lines and creating frames in a Part Studio. (Yes, we also created models based on mating individual parts of timber, but this is a huge amount of…
-
wheel for a given road feature script
I'm trying to design a 3d printable bearing and i had the idea to make to make the rollers herring bone gears to avoid having to use a roller cage. gears however have some sliding between the gear teeth so for the rollers i want to something similar to what's shown in this video. https://www.youtube.com/watch?v=ZWWgGk9JU0E…
-
Creating "A Slot Feature " using Feature Script
I am currently working through a Feature Script Beginners Tutorial - Creating "A Slot Feature , designed for joining two laser-cut parts. Please see attached, the link to the Feature Script studio that I started; that has errors flagged on the 5 TH and 22nd line. Can you assist me on the corrections? Your assistance is…
-
Is there a reverse qCreatedBy? like qCreator?
Is there a reverse qCreatedBy? like qCreator? I want to try to get the name of the feature that created a selected mate connector, then make a copy and give it the same name.
-
I want to create an array of holes in a spiral pattern along the surface of a cylinder.
Is there a way to do that?
-
how to get/use the name of a part to name another Mate Connector in FS? (edited, used to say "part")
I get an error when I use getProperty and then setProperty, but the query field can see the name. how can I capture and use it during an FS execution?
-
How to set a constraint on an assembly based on faces and not on lengths?
Context: https://cad.onshape.com/documents/c326457a6788bf73c38df747/w/5b33f7580add485dd268c063/e/bdadea73543e9531a5d11577?renderMode=0&uiState=677027d6b011fa6254f87917 The battery organizer (the larger piece) has a lid that fits in. I tried to make an assembly to check if the contact is good enough (due to the chamfers I…
-
How to use Move boundary in FeatureScript - opMoveBoundary()
I was having trouble finding how to use the Move boundary within FeatureScript. There is no OpMoveBoundary or OpExtend like you would expect. Here is how you can do it: Import the extend FS from Onshapes STD at the start of your project. // For move boundary import(path :…
-
How to wrap on a non-circular curve?
I want to create a specific texture on the following curve curved surface. When I try using a wrap it lets me pick the circular surface next to it, but not this one. Is it possible to project onto this sort of curve?
-
Loft between circle and a shape?
I have spent a long time trying to work out how to do a loft between 2 simple-ish shapes and cannot get it to work the way I wanrt. I want the loft between the 2 shapes below. The diameter of the top shape matches that of the bottom so want that to follow straight up, but I want the other half to curve in and match. All I…
-
Mounting Boss FeatureScript
Hello all, I've finally finished up this FeatureScript and thought some others may find it useful. It's for making different types of mounting bosses in plastic parts. These are used for adding screws to plastic enclosures, mounting circuit boards, etc... The script was based off of the Hardware Boss script by @NeilCooke.…
-
Round values to whole numbers in text
So I'm building a project that I want to be fully scalable for the user, and want to display the final output size on a flat surface. I got this working by making a textbox and adding ""X" ~ toString(#BED_X/mm) ~ "mm"" and this displays the variable as it should. However, if I scale the project by anything other than 50mm…
-
Is it possible to setup a gear mates and relation for a counter mechansim?
I would like to setup a gear relation for a counter mechanism. The simplest one is shown in this video: https://youtu.be/rjWfIiaOFR4?t=40. I tried but so far have not figured it out. Those who would like to try this problem can search for a two disks counter mechanism, a design that used two of these gear arrangements.…
-
Extruding a half-round shape
Hello community, I'm new to OnShape and not even that experienced of a modeler to begin with. I'm looking for help on how to either extrude in a curved shape, or extrude around a curved shape. Specifically, I'm working on a Gridfinity AA battery tray where the batteries lay flat. I'd like each battery to be in it's own…
-
How to edit a three-point curve that is part of a part
I have a 3D part whose sides are an arc that is part of a circle. They were drawn by setting the two end points and then completing the shape, via the 3-point arc tool. Now I need to change the curvature of the arc but keep the endpoints (increase the diameter of the underlying circle). How do I do that? I tried the Edit…
-
I want to split a A1 template into 2 A3 and 4 A4 templates
Hello for a project i need to split the A1 drawing sheet into the sections mentioned above but when i try to place the lines which should outline these sections I cant edit them. Is there any way to make these lines or A3/4 templates?
Categories
Popular Tags
- featurescript 890
- drawings 614
- assembly 444
- sketch 429
- assemblies 379
- improvements 358
- help 331
- part studio 322
- configurations 307
- feature script 301
- Sheet Metal 296
- drawing 254
- how to 250
- feature request 242
- mate connectors 235
- loft 216
- export 209
- api 200
- dimensions 199
- extrude 196
- sketching 195
- voting 187
- variables 180
- improvement requests 174
- mates 162