-
How can i make this slant?
https://cad.onshape.com/documents/5350dd2b5012e0bb2e71bb41/w/b438e5f5de998088709d96e9/e/db92971ff4c44f638a02d92d?renderMode=0&uiState=694321ea7125b6a5565d668d I've been trying to slant the inside edge of part 4 on the top plate by 2.211 degrees with the outside edge staying at 1.9mm thick with only the top surface on the…
-
How do I constrain only 1 degree of freedom?
I'm new to Onshore (coming from Inventor and Solidworks, and I generally like the mate connectors for constraining things together just cause you can lock all 3 degrees of freedoms with a single constraint. However, I'm trying to layout furniture in a room and it would be nice if I could do an Autodesk Inventory style mate…
-
Help with threads
Hello, I am trying to model a stud to test on my car. I want the stud to be 12x1.75mm, but I cant get the threads to start and end at the correct space. https://cad.onshape.com/documents/9d292538ebe979f87628cb4b/w/9dc8bd52d6aa4c93d854f9e8/e/c96fa806a700dd569bb85830?renderMode=0&uiState=6941cd3748fa975cb4c7d939 Below is an…
-
How to get changes to sheet format to apply across the whole doument?
I have a large technical drawings pack in onshape and I have realised there is a mistake in the titleblock. Is there a way to edit the title block and have it apply over the whole document similar to 'edit sheet format' in Solidworks, rather than having to edit each sheet individually? In my opinion, elements on the title…
-
Does dynamic suppression support conditional logic
Does dynamic suppression support conditional logic across multiple feature folders, and will future updates extend this behavior to assemblies as well?
-
How do I reduce extremely long assembly regeneration times?
Hello, I am new to Onshape and creating assemblies in CAD in general. I am attempting to design and model a robot for my school's competition robotics team, but I have run into issues with assembly regeneration times. With only half of the robot's drivebase completed, regeneration times are frequently above 10-15 seconds,…
-
copy and paste
I am using the free version. I can copy and paste within one assembly. I cannot paste into another assembly. Nor can I insert. Is this a limitation of the free version?
-
Featurescript: Setting parameters to optional
Let's say I create a feature and then want to import it into another studio feature studio for use. Is there a way to make some of the definition parameters optional? Edit: edited for clarity
-
Update: Super Derive with mate connectors
I just pushed an update to the excellent Super Derive feature by @ilya_baran with 2 new options: * Use origin - on by default, will use the origin of the Part Studio as before. Turned off, will use the first mate connector of the first derived part. * Include mate connectors - off by default, will not derive the part's…
-
BSPP and NPT Threads in Hole callout
Would anyone know when we can expect further functionality within the hole feature to include BSPP BSPT and NPT threads?
-
Cross hatching a rib
Hi experts I created a rib and sectioned it. As per sectioning rules, I expected the rib NOT to be crossed hatched. Unfortunately, I have a sectioned view with a cross hatched rib. Is there a way to NOT have the rib cross hatched?Thank you
-
How can I Export my 3d Model into 3D PDF file in onshape
-
Reference in-context geometry with implicit mate connectors?
Is it possible? The mate connector feature seems able to, but Hole and Sketch with implicit MCs don't pick up on in-context geometry. Is there a way to make this work in a custom feature?
-
Onshape encountered a problem with your last operation. If the problem persists, please contact supp
I can't see any Features that I have used or 3d print this part. https://cad.onshape.com/documents/18fb562d1a69e488e04b0a1c/w/997691d41b28600cbf7425dd/e/1848fcf81378fd898e718f8c?renderMode=0&uiState=660f24a01a77917bb3c98e63
-
Shell doesnt work
I have two rounded rectangles of different shapes and sizes and lofted one into another.successfully. But I need to Shell this part with 1.7 mm wall thickness. Shell gives me error. These are the dimensions: Profile A: rounded rectangle 40.7 × 33.9 mm Profile B: rounded rectangle 37.7 × 30.3 mm Target wall thickness: 1.7…
-
Import DXF/DWG: Hatching is not supported?
Hi everyone After creating a new sketch, I tried importing a DXF/DWG file but I'm getting the following error: The image is a simple logo (no text, all outlines) exported with Adobe Illustrator. These are my export settings (default): I don't even know what nesting is in this context. I'm just trying to cut our logo from a…
-
.URDF export improvements
Hello OnShape, Love the product! Are there any plans on improving .urdf export for robotic purposes. urdf is a robotic format that represents a robot in simulations. I'm only able to find https://github.com/Rhoban/onshape-to-robot This is good but there are a lot more to be desired. Keep up the great work with OnShape 💯
-
New CNC Overcuts (/Dogbones) custom feature
I wrote a new FeatureScript for adding overcuts (dogbones) to all corners of a part that need them to make the part CNC machinable. I am aware that there are existing custom features for this, but I believe this one is a bit simpler to use, and adds a couple new features. You simply select the parts that you want overcuts…
-
How would I do this twisted surface that makers muse did?
Makers muse recently did a video Going over Surface modelling in CAD using fusion 360 and said that most of this is applicable to Onshape as well. I wanted to follow along with the tutorial but I'm running into this issue immediately because onshape doesn't have the tool highlighted in red. So How would I make this twisted…
-
Movement simulation in sketches (grouping sketches)
To design the geometry of parts of a folding leg and other parts, I need to be able to group sketch entities. Like the frame, the unfolded leg and a folded leg (sketch copy/paste into new sketch) The folded leg sketch now contains the leg in blue, but parts move all around, they are not like a fixed block. When I lock the…
-
Onshape Stuck not showing feature tree
Hi, While modifying a dimension on a part, onshape suddenly froze up as seen in the screenshot below along with the following error: Onshape encountered a problem with your last operation. If the problem persists, contact support. Support code 59a13a3290a2cb860f3e8c0a. I am unable to access the feature tree. It seems to be…
-
Angled spars through ribs
Hi all, I have a spar (orange) which is notched into ribs (blue). The spar is not perpendicular to the ribs and so the notches in the ribs have angled faces. The ribs will be cut by 2D laser cutter so it is not possible to cut those angled faces. The notch faces would need to follow the red dots in the image below. The…
-
Custom Feature: Keep Part
-Link to feature up front- I can't believe I never posted about this one. You guys know Delete Part? This feature is nothing like that. Use it on really gross imports with a billion objects you don't care about. Probably don't use it for any other reason.
-
Ou faut il aller?
ne connaissant pas OnShape et je ne maitrise pas suffisamment pour modéliser des pièces simples, je voudrais commencer par "Niveau DEBUTANT" (activités de 1 à 4). Ou faut il aller?🤔
-
Sketch "Use tool" (project geometry) cannot serve as an anchor
Hi, I come from Fusion 360, where I got in the habit of using the "project geometry onto sketch" feature. I figured I could do the same in OnShape, but it doesn't appear that "Use" is meant for the same thing. Here are the problems i'm encountering when I use the "use" feature in OnShape: the projected geometry is…
-
Somehow filter out default planes when using qEverything()
I have a little customized delete feature that lets me delete from the part studio the inverse of what is selected. Sometimes I will import data and there will be alot of stuff in the part studio. So, I derive the studio into other ones and I use this inverses delete feature to select the parts I want to keep and delete…
-
Oval ring as twisted rope?
Hello. I'm struggling create an oval ring that looks like a twisted rope: (this is made out of 2 strands; I'm trying make it as 3 strands) I found several topics creating twisted cable, but for some reason my attempt recreate it doesn't work:…
-
can I import some of my DWG files and work on them?
-
Can anyone show me how to properly use opLoft Connections?
Link to Onshape doc I'm trying to create a loft with a two sets of edges that have a different edge count to add additional functionality to Loft Fillet. I'm not quite sure I understand how to use the connections portion of opLoft correct. I'm selecting one group of edges, querying for the endpoints, and then using…
-
Learning Center Support
Use this category to get help with exercises in the Learning Center, request improvements to enhance your learning experience, and report outdated material. If you are having trouble with an exercise, please provide the course, exercise title, and description of the issue.