Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:
- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Onshape Forums
Discussion List
-
Rename existing part?
Is there a way rename a part and add data from configuration? For example my part studio has 2 configurations: width and length, I'd like to automatically rename "Part 1" to "My part 123x456" where 123 and 456 are width/length Is it possible with FeatureScript?
-
Need advice on how to make my Airflow Bottle waterproof
Hi All, I am quite new to 3D printing. Just got my Bambulab X1C. Have had this design in mind of a non glucking (Airflow) bottle (have actually patented it many years ago). Now finally I could design it (I used Onshape) and print it. One problem: I used PLA and cannot get it to stop leaking atiny bit. So what do I do to…
-
create sketch feature script
I have a feature script that creates a new sketch and a set of geometries at a selected point of an existing sketch or feature. I would like to be able to add the sketch geometry to a current and active sketch. I could import a DFX, but this would be a static set of lines and objects. My current feature script dynamically…
-
When I click ok (ck) on the mirror parameter box the the image of the mirrored objects disappears
I am experimenting with various surface treatments. At some point my project lost the normal image and a few squiggles replaced the part that I was drawing. I moved the 'end of the 'features bar' back to the beginning and incremented slowly till I got to the mirror1 command. After clicking the ok check mark on the…
-
Loft problem - aerofoil shape + offset sketch
I'm trying to create a "formwork" for an aerofoil shape to see if I can heat+shape a foam sheet. The aerofoil shape was created using the Profile Generator feature. I've created a test aerofoil as the Pattern and am trying to use an offset sketch to generate a matching shape for the formwork (offset at 5mm) The inner…
-
How do I convert these simple 3 sketches into a sheet metal part?
I have these 3 sketches that are joined together at the edges but non-planar. I just want to create a sheet metal part that is exactly these planes but I cannot seem to do it, both the extrude, thicken and convert features do not recognize that these 3 sketches are connected and it makes 3 seperate parts out of them.…
-
New Custom Feature: Integer Belt (published)
Calculates the actual c-c distance and integer-tooth belt/chain size needed for two given pulleys. Produces a sketch, and a named 2D curve. https://cad.onshape.com/documents/eddab6ffa09d0f4762af7dee/w/e67f376e78db3ea1678cda81/e/83071fc3967457b56fbef8a4
-
Updated Custom Feature: Bounding Cylinder (now published)
I finally fixed some tricky bugs in this and it seemed ready to release. I usually use it to simplify motor packaging in robots. https://cad.onshape.com/documents/eeb90239864f53d6b4130957/w/8442dd3a95f8ea5e015a3b75/e/e908a997fcb062d6f1aeb637
-
Different width of the Chamfer after Boolean operations
Hello! Have a problem with continues chamfer on the edges after Boolean operation. On the screen you can see the different width, can't solve it for days, the only way I found is to create first chamfer shape (3rd screen) with Loft and after vertical edges will Chamfer ok, but it is a very tedious way. I tried to connect…
-
3d sketch
I'm new to onshape and I've been a solidworks user for 13 years, can you draw a 3d sketch in onshape?
-
Can't publish my custom feature
I just realised my frame trim/extend featurescipt isn't publicly discoverable (sorry, kind of new to OnShape). I've met all the requirements, but for some reason it's not detecting that I've used the feature in my example:
-
Burr
Hello,Is there a way to automatically cut away the burr that forms along the bend line on the sheet metal part directly in CAD?Here are 3 images.
-
How to remove a material from a curved surface.
So I'm designing small container. It has a small groove running around the entire inside surface, Unfortunately I can't seem to figure out how to make the groove on the curved surfaces. Any help would be appreciated.
-
Learning Center - Mark lesson as completed
I am using learning center and enroling in courses, learning paths and lessons. Usually when I complete these they are moved from the "My Learning" tab into the "Completed" tab. But I recently started the lesson "Oneshape Assembly Basics" and completed it, and it hasnt moved there. This is not a problem with lessons…
-
I want to copy this sweep to the other "islands"
I'm trying to copy this sweep to the other "islands in this extrusion but I am at a loss for how to do it.
-
How to achieve parametric- or feedback friendly design using frames
Is it possible to somehow assign a variable to a frame profile, so when I need to change frame profiles of multiple frames, i could do it in one place not change every frame object separately? 2. Regarding limiting frame ends. If i change the frame profile I have to re do most of the 'limit frame ends'. Whats the best way…
-
Let's solve the speed issue
Lately, I've been having a great deal of trouble doing anything in OnShape. For all the great features the program has, it seems to be very vulnerable to long load times, which cripples my ability to work on a project. I have verified that this is only an issue with OnShape, rather than my computer. It's nothing special,…
-
Can I add notes to a sketch within a part studio
I know we can add comments, but is there way to add notes to a sketch itself, similar to when doing 2D drawings. Example: Say I add some drawing lines for a component I want to use, a simple outline of the part to show size and location. It would be nice to be able to point to it with a note that contains the parts…
-
I am unable to create classes.
I am unable to create classes. The option is not available when I click on CREATE. Any advice?
-
Improvements to Onshape - July 18th, 2025
Welcome to the new release! This release contains a wide variety of features and improvements touching virtually all areas of the product: Configurations, Assemblies, Surfacing, Drawings, Data Management, as well as CAM and Render Studio! We hope there's something out there for everyone! CAD IMPROVEMENTS CONFIGURATION…
-
'Breaking up' a composite part imported from a STEP.
Hi. I have a vendor-supplied STEP that imports as a composite part of surface bodies, even if 'create composite' is NOT checked on import. I'd like to do some work on the surfaces to thicken them, but I cannot find a way of splitting the imported composite back into its consistutent surface features. Help would be…
-
Sketches Created in Featurescript No Longer Appearing Under Feature
I have a feature written in Featurescript that creates a number of sketches. Previously, they were all showing up under the feature's details (when expanding the feature via arrow), but something changed and now they aren't. I'm not sure what changed. What determines whether they show up? I don't get any arrow at all now…
-
Custom Feature: Frame Trim/Extend
I suspect this will get added to std at some point since it's a common feature to frame generators in other CAD packages like SW and Inventor, but while we wait, here's a quick and dirty upgrade to frame trim that allows frame profiles to be extended to faces if the face plane doesn't intersect the body. It's essentially a…
-
Inserting a part studio, in an assembly, in another dodument.
Hello, i have a issue with the following: I have a document where i have made an assembly, with part studio's from the dame document, BUT i ned to also insert a part studio from another document. I use "other documents" in he function "Insert parts and assemblies", to get the part studio from the other document that i want…
-
Get Drawing ElementID from PartID
I am trying to get the elementID of a drawing from a partID. What ive been trying is to first fetch all drawing elements in the document, and then to try to resolve all of that elements references using /appelements/d/{did}/{wvm}/{wvmid}/e/{eid}/resolvereferences The issue is that it resolved the reference but says the…
-
New Feature - Bridge Overhang (for 3D printing)
https://cad.onshape.com/documents/9db73769726a7c1968a9eec6/w/a94665f4983acd43414a91e8/e/f98a3b9885864c1f11d186d6 This tool lets the user print normally difficult geometry much more cleanly. Generally, when printing geometry with counterbored (or pocketed) geometry on the bottom, the resulting print develops a solid amount…
-
Render Studio Access
Hello, I was wondering how I can enable/access Render Studio. I am on Enterprise but am not sure how to enable this. Any pointers would be great. cheers!
-
Splitting and deleting 3 overlapping lofts
I have this part with 3 overlapping lofts and I am trying to delete all the internal parts so all are open. I have tried splitting multiple entities in one operation, splitting seperately, but I keep getting "Selected entity does not split selected parts." errors. Can anyone help me with step by step instructions?
-
FeatureScript IDE (Secret menu) 😎
. While doing some FeatureScripting earlier, I was late for a meeting and reached over to grab my headphones and accidentally opened up a secret menu. After arguing with GPT about what the hotkey could have been, I systematically started pressing all the logical hotkey combinations for an IDE (Integrated Development…
-
Some built in functions are not being found, how do it fix?
im trying to use indexOf but it's not pre populating or working. I imported common fs, but still an issue. How do I fix this?
Categories
Popular Tags
- featurescript 890
- drawings 614
- assembly 444
- sketch 429
- assemblies 379
- improvements 358
- help 331
- part studio 322
- configurations 307
- feature script 301
- Sheet Metal 296
- drawing 254
- how to 250
- feature request 242
- mate connectors 235
- loft 216
- export 209
- api 200
- dimensions 199
- extrude 196
- sketching 195
- voting 187
- variables 180
- improvement requests 174
- mates 162