Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:
- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Onshape Forums
Discussion List
-
How do i get parts to push against each other?
I'am new to Onshape en new to 3d CAD. I have a simple mechanism. The grey part slides over the blue part (slide mate) and the purple parts rotates around the axle. How do I get the purple part to rotate when it interacts with the grey part? The geometry of grey and purple need to be refined, for now that's not relevant.
-
When importing a 3D scan OBJ, all I see is a bunch of outlines. How can I get it to display properly
Hello! I am trying to import a OBJ file (3D Scan) of an engine bay to use as a reference for modeling parts and such. When I import the file however, the model is rendered as a bunch of outlines, which makes it unusable. Occasionally, when I hover over specific parts of the model, more outlines appear. I attempted…
-
How can I pattern this particular shape as such:
I know how to draw the "figure eight" shape, but I don't really know how to get this to pattern in such a way as seen above. Any help would be much appreciated.
-
Circular pattern of an elliptical ID groove
I'm trying to pattern an elliptical groove on the inside diameter of a bushing. When tried the circular pattern it say it could not regenerate properly. Tried all the options "Reapply features" and other but still could not make it. Appreciate any help on this. Thanks in advance. Link…
-
Derived via FS adds mate connectors that don't exist when derived directly as feature
I'm trying to understand the reason and how to avoid deriving mate connectors via FS. I have simple part studio with a cube and hole: There is no mate connectors exist. However, when derive this part via FS, it also adds mate connector for the hole: Why this happening and how to avoid these mate connectors? Thank you! P.S.…
-
set default value for length and angle in annotation in feature script precondition
How do you set a custom default value in a length and angle precondition? I'd like the default length to be 10 mm and the default angle to be 65 degrees.
-
New Custom Feature: 8020 "3030" Profile Converter
A custom feature to bulk convert 30x30mm prismatic bodies (works with with mitered ends) into 8020 "3030" profile aluminum extrusion. future enhancements will obviously be the ability to convert to other profiles, possibly automatically. can anyone tell me where the official Onshape 8020 library document is? FS here:…
-
Best Way to Mirror Parts In Place (Without Creating New Parts)
I need to invert a set of parts, equivalent to the Mirror function. But without creating new and deleting old, and losing the names of the parts involved. I don't care it the part moves in the process or flips in place. I've been trying to scale across the z-axis with a -1 scale factor, but it's turning red… Is negative…
-
Custom Feature: Engrave
Link to Engrave I like to label all of the machined parts I possibly can with their part numbers and revisions so my coworkers can easily find them in CAD without knowing their location in a folder. Yesterday I released the Hershey Text function and this engraving feature is meant to pair with that in my almost finished…
-
SELF-INTERSECTING BODY (LOFT)
Hello, I saw some posts on this forum about it but none helped me. It surprising me because I don't think my issue is really specific so I think I am doing something wrong. As you can see in my document, I want to design the profile of a tube. However, when I want to connect the different parts together, I have an…
-
How do I create this spout
I've been playing around with this for a while and made some progress but nothing that will work properly so far. I have a revolvled sketch which creates the bottle shape and onto that I am trying to add a pouring spout. I have sketched out the top shape and the side profile. I was trying to wrap the shape onto the surface…
-
Creating different appearances in Render Studio
This might be a stupid question, but I'm having trouble wrapping my head around how appearances work in Render Studio. There are a bunch of materials that seem frustratingly rigidly defined, and I don't understand how to replicate "that, but slightly different" — or, for that matter, how they are defined to begin with. For…
-
Having trouble to finis my cam profile script,
here the start of the code: and the errors:
-
Master Model course slide correction(s)
In the Master Model course, section 03. Maximizing Master Model Techniques, slide 47 needs to be updated within Exercise: In-Context Space Allocation. Specifically, you cannot suppress an item within a BOM in flattened mode any longer. https://cad.onshape.com/help/Content/bill_of_material.htm#exclude_local The slide should…
-
is there something like qOwnerBody but for in-context bodies?
the real question is: is there a way NOT to turn something purple and black when selected, but if not, i would like a way to only select a vertex, edge, or face from context, but in the code, process the ownerbody of that element. qownerbody does not seem to work for in-context bodies.
-
New Custom Feature: Panel Maker
Creates a centered panel within four frame members, simply by sequentially selecting the four bounding frame members from an In-Context part studio. Will offset its edges to fit within groove, can be adjusted with parameters (thickness, groove depth, clearance gap) Renames panel with dimensions. Created to help us make…
-
Any experience with Neil Cooke's mold design tools?
Hey folks, I was wondering if anyone on here had any experience with @NeilCooke 's mold design tools. I watched the webinar but I'm pretty confused on how to establish the parting line surface. I could use a bit of instruction on the meaning of Inner Loops, faces to include and faces to exclude. What is an inner loop? What…
-
Add PartStudio Feature using Onshape Java client --> Error processing json
Hello Community, I try to write an app to generate a model by adding FeatureScript-Features to a PartStudio. I am able to add a feature to a PartStudio using the method at Glassworks. However I get an exception (com.onshape.api.exceptions.OnshapeException: Error processing json) trying to do the same via Java client. I…
-
Surface Text
Surface text feature works great BUT, it generates a slice cutout on the opposite side of the model. What am I doing wrong?
-
How can I copy errors and warnings?
Newby to FeatureScript and using ChatGPT to help out but one thing that's driving me crazy - warnings and errors appear as "floating" text boxes meaning they only appear when I hover over the error and disapear when I move my mouse. This makes it impossible to "copy" the error and paste it into a browser. Is there a fix…
-
Third angle default
Is it possible to add the setting of the projection type in the work space tab where we change to metric. Maybe even a choice that says Australian standards
-
Can I import a part studio from a CSV (or similar) file?
I have a document with a lot of variables that I would like to manage with software I have written to generate some items, and is also edited in a spreadsheet. I can export the existing variable studio as a CSV, but I would be able to replace the existing variable studio with the new values. Is this possible in the free…
-
COA complications
Hi. I just recently started the COA for Onshape Tuesday evening, July 23rd. After completing the model based section of the test, it exited and then gave me the option to either start the knowledge based section immediately or wait. It gave me until 8 pm on Wednesday the 24th of July to complete the knowledge based…
-
New Custom feature: Publish geometry
I'm pleased to announce that my Publish geometry Custom feature is now… published. https://cad.onshape.com/documents/40d43cad542dccfa4772d7e1/v/856bd2b631f7e35c4a2b34ad/e/788996d08647863b81b2ff61 Like many other CAD systems (Creo, CATIA etc) the Publish geometry is intended to make Top Down Design workflows much more…
-
Using a pressure parameter in feature UI, accessing Young's modulus from material properties
I'm working on a feature that will A: Create cross sections along a curve from a selection of bodies and B: to calculate the bending stiffness of each cross section, though this may beyond the scope of Featurescript. I am selecting bodies as part of an array parameter, and then extracting names and material properties in…
-
Custon Feature to concatenate custom property and part name
Can someone please guide me OR share materials to help me achieve the following: I have a custom property called BCP Part Number, I want to automatically transfer this number and concatenate it with the Part Name as per the below image. Such that the final part name is a combination of BCP Part Number + Part Name.
-
Issues with Loft or Sweep when creating an aircraft wing using airfoil profiles and guide curves.
Hello, I’m new to modeling. I was trying to create a wing using the Profile Generator tool. I created guide lines and generated the profiles; I have all the profiles, but when I try to use the Loft or Sweep tools, they simply fail to recognize the paths. I tried generating guide lines on 3-point planes, but they haven’t…
-
Change apperance of a bend line in flat part
I am wondering if there is a way to change the appearance of a fold/bent line in a flat metal part. In the UK, british standards use a double dashed line to denote a fold line. Onshape seems to use a centre line which is really confusing my metalwork students. I was wondering if there is either a way to change the…
- Add autolayout
-
Auto-number text on the same face of all parts
I am looking to try and make a FeatureScript that I can select a face, it will then place text with size and font as variables, on the face of every part. I have been trying to utilize Gemini and other AI tools to assist but the translation of how to actually use the code is limited and I am running into errors. What is…
Categories
Popular Tags
- featurescript 890
- drawings 614
- assembly 444
- sketch 429
- assemblies 379
- improvements 358
- help 331
- part studio 322
- configurations 307
- feature script 301
- Sheet Metal 296
- drawing 254
- how to 250
- feature request 242
- mate connectors 235
- loft 216
- export 209
- api 200
- dimensions 199
- extrude 196
- sketching 195
- voting 187
- variables 180
- improvement requests 174
- mates 162