Welcome to the Onshape forum! Ask questions and join in the discussions about everything Onshape.
First time visiting? Here are some places to start:
- Looking for a certain topic? Check out the categories filter or use Search (upper right).
- Need support? Ask a question to our Community Support category.
- Please submit support tickets for bugs but you can request improvements in the Product Feedback category.
- Be respectful, on topic and if you see a problem, Flag it.
If you would like to contact our Community Manager personally, feel free to send a private message or an email.
Onshape Forums
Discussion List
-
"extrude" curved letter
hi, I'm using projected curved to convert letters to curves on curved surfaces. I then convert the curves to faces (surfaces) and use offset surface with loft to "extrude" the letter it works well for most of the letters except closed letters like o (i didn't check q of p or d…). you can see in the picture that the loft…
-
Rounding fault?
Hello everyone I have been having a problem with rounding edges for a few days now. If I want to round the four corners of a body (e.g. 50x50x5mm), this is no longer possible in one rounding operation. As soon as I select the second corner, I get an error. I assume that I have changed something somewhere and not that it is…
-
Plane-like structure showing inside sketch (even after ALL planes hidden)
I have...just a few sketches that i created to reverse design a product, but am finding that even after i turn off all planes, the sketch still shows a plane-like structure. This makes working with a complex lattice very difficult (at best). This seems to be a graphics issues, but its not clease. Is there a setting i am…
-
Can i constrain assemblys to certain values?
I’m working on a articulated dummy/mannequin that i want to use for sizing other designs so that they will be somewhat ergonomic. I found a model of a dummy, but when making the assembly everything moves uncontrollable. There are a lot of ball mates that all seem to influence each other so its very hard to set a desired…
-
is it possible to make a circular number pattern? ie. a dial face.
I'm trying to make a 2 digit counter. I have the design the way I want it, however I dont know how to make a circular pattern of numbers from 0-9. Is this possible ??
-
Making "Split" function skip certain features
I'm working on modeling housing for a mockup axial compressor, and I'm using the "Split" tool to turn the housing into separate upper and lower sections I can bolt together later. Some of the features of the housing get split at awkward points, and I was wondering about somehow setting up the model so that those parts stay…
-
Help managing students - Edu Ent version
Hi guys, my first time here, my pleasure to meet you all. Problem: I want to make graduated stundent as viewer only but without remove them. Question: there's any way to change an user from active to a viewer only kind of mode? Is yes how it can be done, I can't get into this. Hope my question clear enough. Thanks .…
-
Why will the circle pattern not let me pattern more than 10 circles?
I'm trying to pattern a circle with 11 circles. I can not get the program to produce any more than 10.
-
make a surface from between 2 closed 3d curves
I've a curved surface of a part I want to put letters on it. I've found that using prjected corved gives me the best result. it works for all letters exept "o" since "o" is made off 2 closed curved while other letters makes 1 closed 3d curve. from the curve I use fill to make a surface. how can I make a surface from the…
-
create a surface between two curves
I'm tring to create a surface of a letter like "o" projected of curved object. after projecting the letter I'm getting 2 curves one for the outer line of the letter and one for the inner line of the letter. when i try to fill the curves to convert it to surface I can only get a full fill of the closed curve. I what the…
-
Max Frame Size Question.
Hey Everyone I was curious if anyone knew a way that I can set a maximum length for a framing component and have it generate multiple bodies based on that. Example: Maximum Frame Segment I want is 75" Sketch 1 100" line and use the framing tool to automatically generate a 75" body and a 25" body or Sketch 1 160" line and…
-
How do you create a surface that is rough on a round edge that can print
So I know that you can makes surfaces with render studios but I want a rough surface that will print. Now I already know how to do it on a flat surface like below But how do you apply to a smooth surface like this without custom features like below?
-
Improvements to Onshape - February 21st, 2025
We are ready with our third release of the year! This update includes improvements to core modeling, drawings, Render Studio, and more. Let's dive in. CAD IMPROVEMENTS WRAP ON CONICAL FACE You can now apply a Wrap feature to a conical face. In the past, this was limited to cylindrical faces.…
-
Transition fillet from cylinder to prism
Hi All, I've looked and read lots on this but I still can't find a solution. Maybe I'm not looking in the right places. I have a cylinder that uses a loft to transition to a rectangular prism. No problems there. I am trying to add fillets to the edges created along the edges from the cylinder to the prism. I have tried…
-
how do i coppy and paste multiple bodies
I have been LOSING MY MIND for the past 2 days and I can not figure out for the life of me how to copy and paste also if someone could help me find what is not fully defined that would be amazing…
-
How to make mate connectors invisible (Bolts and nuts from standard library)
I want to make the fastened mate connectors after inserting bolts and nuts from standard library invisible. After inserting, the mate connectors are visible by default unlike the other mate connectors. Also, under the feature manager tree, the mates (fastened) all say "Invisible" or click to hide. But they are visible in…
-
Frame assembly drawing aren't able to access cut list of the composite parts making up the assembly.
I am building a Trailer Frame but am having trouble accessing cut lists of the composite parts that I have created in my drawings. I was hoping to create step by step assembly drawings with the use of an assembly that is made up of composite parts that define each new step in the assembly. Even though my assembly is made…
-
Rotate plane so that horizontal direction matches other sketches
I've created a plane that this perpendicular to a line in a sketch (had to use a mate connector to achieve this). However, for the lack of a better way to describe it, the secondary axis of the plane is not horizontal. I would like it horizontal so that I can use the horizontal constraint to ensure conformity with other…
- how do I make a .stl file then export it?
-
How to update workspace
When I try to use the derived feature, I keep getting a message saying: "This workspace is using an old version of the feature library and must be updated before the Derived feature can be used." Despite hours of searching, I have not been able to find out how to actually do this update. I have tried merging the last…
-
CAD clean up for CFD simulation
Hello! I'm working on a CFD simulation for a small pump impeller using SimScale (first image). The platform’s integration with Onshape makes it convenient to import my geometries directly. However, I’m encountering some challenges with CAD cleanup before meshing, and I’d appreciate any insights. Outlet Geometry Issue – The…
-
Sketch dimension text
Is it still true that you cannot add text to a dimension in sketch mode? Like when I have 8 concentric diameters to dimension, I can't put "flange nut b.c." and "pitch CL" on respective dims, to tell them apart?
-
Can Not Edit Category Property
Category property is disabled and read only. The parts themselves are full editable by everyone who needs to edit. We have custom categories that must be used. I can't find any info on where this is controlled. https://cad.onshape.com/help/Content/EnterpriseHelp/Content/permission_schemes.htm appears to only cover…
-
how to make parts shiny
I have a model of a boat and I want to make the hull shiny as apposed to matte so it looks like real metal. Thanks!
-
opMoveFace direction
Hi, I'm trying to move all but one of the faces of a cuboid outwards from their body as in the images below. The face not to be moved is coplanar with the base part: Can anyone advise how best to calculate the faces directions for the move transforms please? My test document is here:…
-
What could be causing this projection to change? (is it a bug?)
I've made very small angular adjustments to a sketch and a sketch below it that projected a curve has changed dramatically. Asking here is a really long shot, but who knows - maybe someone has encountered this before and can confirm that it's a bug, or maybe it isn't! I'll walk through the only diffs and you'll see it…
- How do I shrink something?
-
Can I create my logo as a 'permanent feature' of sorts?
I want to be able to add my logo to my drawings and designs. Can I do this some how without having to draw it from scratch each time? I have drawn my logo and extruded it to 2mm in a document of its own. To be able to access this and resize it in other documents for quick use would be so much easier than having to draw it…
-
Variable Table Symbol on far right side has disappeared
Hi On the far right side of the screen, together with the Appearance Panel, Configuration Panel and Custom Tables, there used to be a symbol to open the Variable Table. The last one has disappeared since yesterday. Where can I find it? Thanks for your help!
-
Auto dimensions using variables
Hi, When adding sketch entities the dimension boxes only seem to enable when a numeric character is entered, it would be nice if they also enabled when the # or an alpha key is pressed to allow variables to be entered? Currently I type a 0, backspace and then enter the variable name. Maybe I’m missing something? Thanks.
Categories
Popular Tags
- featurescript 890
- drawings 614
- assembly 444
- sketch 429
- assemblies 379
- improvements 358
- help 331
- part studio 322
- configurations 307
- feature script 301
- Sheet Metal 296
- drawing 254
- how to 250
- feature request 242
- mate connectors 235
- loft 216
- export 209
- api 200
- dimensions 199
- extrude 196
- sketching 195
- voting 187
- variables 180
- improvement requests 174
- mates 162